Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
25E10002

Truck Door End Hinge & Roller Cover Black E-coat finish for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish
  • Removable cover allows roller change without hinge removal
  • Cross Reference: W #1209 T #70162
  • Box quantity: 50
CB332A0500

Cable 3/32" 7x7 500' Galvanized

  • Galvanized cable 3/32" 7x7 500ft spool.
  • Cable break strength: 920 lbs.
Comparison charts
846CABLECL

Cable Clip - 14GA

  • Cable Adjustment Clip
  • 3 hole pattern
  • Used to attach a cable to the S-hook on an extension spring system
  • Same as part number 423
4X33PO50

Devanco Loop 4' x 33' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
19-5814

LiftMaster Trolley Chain Pack #48 for 14ft Door

  • Chain pack only
DL-4000-8

Dock Leveler Retainer Galv. Steel Weldable 8' Long

  • Weldable to sides of dock leveler
  • Use with 4007 aluminum retainer & light brush (not included).
  • Vinyl insert slides into this outer retainer.
08-11012

LiftMaster Bevel Gear 5/8" ID

  • Fits LiftMaster GH operator
27-24202

Truck Door Single Torsion Spring Assembly 98/60 for Toco Roll-Up Doors

  • Single counterbalanced spring design available in 36" 48" and 60" spring lengths.
  • Shaft Length: 98" Spring Length: 60" Wire Size: .243
  • Quick and easy counterbalance spring adjustment with easy calibration to door size and weight for effortless operation.
  • Springs treated with rust preventative
  • Heavy .243 dia. spring wire
  • Heavy-duty cast aluminum cable drums hold up to 130" of cable
    • .......more details
DB13

Molded Rubber Bumper Black 13" L x 10" W 4" Projection 2-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
  • Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
50195

Doorlec Front Idler Assembly with Shaft 41B9 Oilite Trolley Models

  • Fits all Doorlec commercial trolley operators
  • Same as # 50190
342.155

Whiting Intermediate Panel Tongue & Groove 15-1/2" x 96" Price on Request

  • Standard size panel primer only
GREASE

Gear and Rail Grease 3/4 oz Tube *** No Longer Available

  • A low temperature lithium based grease
  • To avoid tooth wear premature failure and temperature rise caused by friction by promoting sliding between teeth
MCJH-34-115-CON-R

Lynx MCJH Heavy-Duty Jackshaft 3/4 HP 115V Contactor Right Hand ** Replaced by CDJH

  • Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
  • 4L V-belt primary reduction #41 drive chain and sprockets.
  • Adjustable friction clutch magnetic solenoid brake.
  • Fully driven adjustable limit switches.
  • Heavy duty 3 button wall station (Open Close Stop).
  • Adjustable spreader bar assembly included.
    • .......more details
4009-12FT

Aluminum Retainer only for Light Brush 12' Long Reverse Angle

  • For reverse angle rolling steel doors.
  • For use with Light Brush or Vinyl Insert.
30B363

Capacitor Motor Start 53 uF - 64 uF 220V *** No Longer Available

TRANSF088

Manaras Transformer 480-24V 40VA

  • Transformer 480V Primary 24V Secondary 40VA
PL-A21-RPM-WHEEL

Lynx RPM Reader Wheel

H753L5-LH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 208/230/460V 3P Logic 5 Left Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
MD-00029

Roller Chain #41 Sold by the Foot

.262-258-R-C

Cut-to-Length Torsion Spring .262 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
PRO-GH-5053-PANL

Micanan 1/2HP 575V 3P Gearhead Operator N Controls *** Price by Quote Only

  • Special Order by Quote only
PLATE084

Manaras Plated Brake Plate for OSH

  • Plate only
Q084

LiftMaster Cam Lock and Keys HCT K80-50142

  • Same as K80-50142
  • Fits model HCT
  • Comes with 2 keys
25-01435

Truck Door Stainless Cables 110" 5/16 eye 7x19 Pair for Roll-Up Doors

  • Works with both Whiting and Todco doors
  • Aluminum eye ends are used (only on 5/16" eye cables)
  • Cable size: 1/8"
765

Fasteners Serrated Flange Nut 3/8-16 1000/Box

  • Serrated flange face to provide locking
1003-1-5/8-8'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
URBAN-MR-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Narrow multi rib pattern - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
MG00013

Micanan Ribbed Hex Nut 3/8" - 16 UNC

  • PRO-GHC operator parts
  • 8 required per operator
MOD163A

Manaras Heater in Reducer & C-Box 120V-1P 24VAC 15W + 30W

  • This modification is an option when ordering a commercial operator
1104-16FT-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 16' Long - Dark Sandstone (DDG)

  • Sandstone rigid vinyl retainer with dark sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
2300L

LiftMaster Builder Series Chain Drive DC Motor Wi-Fi Battery Backup

L955W

LiftMaster Multi-Function Control Panel Secuirty+ 3.0

  • Includes a large push bar for garage door opener operation and a light control button.
  • Built-in learn button enables fast & easy programming of remotes keypads myQ® accessories and Wi-Fi garage door openers.
  • Compatible only with LiftMaster Security+ 3.0™ garage door openers.
  • Warranty: 1 Year
Installation ManualManuel d'InstallationCompatibility Chart 2025Comparison Chart 2025
.192-2-3/16-72-RH

Spring Wire .192 x 2-3/16" x 72" RHW Galvanized

  • .192 x 2.188" x 6'
HW-BRG-1

Lynx Bearing 1" x 2" OD

  • 2 in total on a MCJH
LVB420-11SF/P2

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P2

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
CAPACITOR037R

Manaras Capacitor 340-408uf 165VAC incl. Bleeder Resistor

  • Replacement for capacitor037 on MOTOR256
201-300-401-01-REFRUB

Refurbished 201-300-401-01 Unit

10TD900HH1

BEA 1-Button Transmitter 900 MHz

  • Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
  • It also provides better penetration of obstacles.
  • Operating temperature: -10 to 55C
  • IP65
PULLEY015

Manaras Double Pulley

TS-1-207-GALV-KEY

Tube Shaft 1" x 207 (17'.25) Galv w/KW 1/4" x 3/8"

  • When ordering order one foot longer that actual door width
  • Comes with 3 keys 1/4-3/8-3'' long
H11G02-SS

Hinge #2 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
GALV-306-6-L

Cut-to-Length Torsion Spring .306 x 6" Left Hand Wound Galvanized Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-6-INSTALLED
5001-16-SANDSTN

Residential Side & Top Weather-Strip 16' Long - Sandstone

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
MWR22B

Miller Edge 2-Channel Wireless Edge Receiver RF 318 MHz

  • Power source: 12-24 volts AC/DC nominal Nominal 60 mA 140 mA activated
  • Output: N.O. N.C
  • Wire connections: Integral 18” wiring with #6 spade lugs
  • Antenna: Attached wire or F connector
  • LED Indicators: Power channel 1
  • Polycarbonate enclosure
    • .......more details
MGH-6534-M-N1-RH

Manaras 1 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
GALV-250-258-R

Cut-to-Length Torsion Spring .250 x 2-5/8" Right Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
10FALCON-EXXL100

BEA Falcon Motion Detector w/Exp Proof Housing 100ft Cable Mount 6.5' to 11.5'

  • FALCON EX combines a microwave activation sensor with an explosion-proof / flame-proof housing
  • Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
  • FALCON EX can be mounted from 6.5' to 11.5' to fit any industrial application.
  • Nema4/IP66
  • Detection Zone: Falcon EX XL: 13’ × 6 ½’ @ 8 1⁄5’
  • Oerating termperature: -22-140F
    • .......more details
K41-0383-000

LiftMaster Toroidal Transformer 1200lb / 120VAC-240VAC

  • For Maxum ops
SETR2641AM2KP

Erone 2-Channel Mini Transmitter with Paradox Tag Black 433MHz

  • With built-in Paradox tag
  • Heavy-duty construction
  • Elegant & easy to carry
  • Unobstructed range: 656 ft (200m)
  • 60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
  • Two lithium batteries (CR2016) included
    • .......more details
Wireless System Chart
MOD050N2

Manaras Friction Clutch Mod. #50 Chain 1-1/4 RGH

  • Installed directly on the output shaft of the operator.
  • Provides added protection by causing the clutch to slip when the door systems requires adnormal torque to be operated.
  • Includes sprocket for #50 chain
  • Operator mounting side must be specified
  • A spreader bar cannot be used in conjunction with this modification
  • This modification applies to RGH ops
    • .......more details
PL-A26-LENS

Lynx Front Light Lens LPL 455+

E/BLOP/118

Automatic Systems Option Double Limit Switch

10BOX45RNDSM

4.5" Round Surface Mount Box

  • 4.5 inch round surface-mount box for 4.5 inch round push plates.
19-50HL-SS

Half (Offset) Link #50 Stainless Steel

  • For #50 chain
SB258100-PAIR

Garex End Bearing Plate Reinforced 2-5/8" - 1" Residential Sold as a Pair

MA005C

LiftMaster Slip Clutch Option Mega Arm

  • This is a replacement slip clutch option for Mega Arm gearbox
TDC7-16

Liftmaster Comm. 16FT Trolley Angle set (10-5816-P x 2) and #48 chain pack (TDC48-16) ***Actual length 227"***

  • Double Angle Rails for doors up to 16'6" high
  • Includes #48 chain pack
GALV-250-2-144-L

Torsion Spring .250 x 2" x 12ft LH Galvanized Green

  • Wire size: .250
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GD-STEND-24D-2

End Cap Steel 16G 24" Double 2" Thickness

  • Galvanized Steel 16-ga (1.42mm) thick.
BEA-10EABA

BEA Bracket Accessory for Eagle Artek

CAMPLATE019

Manaras Cam Plate Opera C-Box

2100-1738

Linear Drive Shaft 1" Slide Gate HSLG

OMT-6112-MON-N1

Manaras Medium-Duty Trolley Operator 1/2 HP 120V with Elect. Circuit Board Monitored N1 Eyes

  • Designed for use on smaller and low-cycling industrial standard lift sectional doors.
  • It features a high starting torque intermittent-duty industrial type motor and a quick release disconnect arm.
  • Equipped with the new Electronic Control Board (BOARD 070) with N1 photoeyes
  • Maximum Door Height: 14' (4260 mm)
  • Back Room: door height + 3'11" (1175 mm)
  • Head Room For Tracks: 5" (127 mm) above the highest point of door travel
    • .......more details
29120

Doorlec Transformer 120V pr 28 V. sec. 50VA

  • 120V primary 28 V secondary 50VA
GEAR001

Manaras Bevel Gear GH/MGH 5/8" 20 Tooth

BEA-10-IXIO-ST

BEA Presence Sensor for Automatic Sliding Doors

  • IXIO-ST is an effective versatile and easy-to-use presence sensor for automatic sliding doors.
  • It can be used for both clear door openings and side-lite protection
  • Precise infrared curtains coupled with visible alignment beams make the IXIO-ST extremely safe and easy to adjust.
  • This state-of-the-art sensor features an on-board LCD screen that streamlines the installation and setup processes.
  • Intelligent Solution :On board microprocessor optimizes data analysis monitors sensor performance and enables system integration
  • Mounting height: 6’6” – 11’6”
    • .......more details
2100-765

Linear Shaft Pulley HSLG

GLASS-ONLY

Elton Sealed Glass Only Clear Made to Order Quote Only

  • Thermal replacement glass only
GALV-262-2-L

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Galvanized Red/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
TRACK005

Manaras 1 Piece Galv Track 2x2x16'6 ** 1 pc Only

  • 2 pices are required to make 1 set of tracks
  • Does NOT include the chain
RS36203

Roller 3" Steel Roller Head Only Heavy-Duty 6203 Bearing 5/8"

  • Steel Roller Wheel diameter: 3"-C 6203 bearing
  • Roller Head Only
E/BLOP/121

Automatic Systems Option 1 Kit 2 LED Lights on Arm

  • Increases visibility of the arm on BL229 gate operator
DC1000-125

Dyna-Hoist DC Series Direct Drive Opener 1 HP 110/240V 1ph ** Price by Quote Only

  • The direct drive operator consists of a DC electric motor directly coupled to a hollow shaft (30:1 reduction) worm gear reducer designed to install over keyed door shaft.
  • Continuous duty 1 HP 90 V DC 1750 rpm motor suitable for 110 to 240 V 1 PH and 60 Hz power supply.
  • Comes with integral absolute encoder to control the door travel
  • 24 V 5 amps back-up battery pack and 3/8” ratchet socket to accept and crank for manually operating the door in case of power failure
  • Programmable wall mountable UL325 compliant NEMA 4X control panel with LCD display and OPEN-CLOSE-STOP buttons on cover
  • Nema 4 photocell
    • .......more details
Pulse Series Installation ManualsDC Series Brochure
185002

Marantec Maveo Bluefi Stick

  • The maveo bluefi stick brings Wi-Fi connectivity to your residential garage door openers via phone app or the Internet
  • Compatible only with: Synergy 200 and 300 series IP20 Bluetooth 4.2 also known as 187141 with manufacture date after March 2022.
  • NOTE: Operators manufactured before March 1 2022 require a control board upgrade in order to be compatible with Maveo products and UL 325 unattended operation. (available soon)
MR00008

Micanan Disconnect SASH Chain Sold per Pack of 10'

MR00001

Micanan Brake Disconnect Cable 3/32" x 12" Long

DAK-2ULT-MVP

EMX Drive Thru Alert Kit Chime/Strobe Pre-Wired Enclosure *** Price by Quote Only

  • Kit includes: 2x EMX ULT-MVP Vehicle Detectors with LD-11 Connectors
  • 2x EMX PR-46-100 Induction Loops
  • 1x SLM500B LED Beacon and Sounder with SLMBW-012-024GY Wall Mount Bracke
  • 1x 120VAC to 24 VDC Power Supply
  • 1x NEMA 1 Junction Box (wall mounting hardware not provided)
Spec Sheet - DAK-2ULT-MVPQuick Start Guide -DAK-2ULT-MVPULT-MVP ManualDetect On Stop
GDI-LG930

GDI Jackshaft & Trolley JDMG-LG-2030 Nema 1 Non Monitored

  • Low Headroom at 4-3/4" (Trolley)
  • Dimensions: 11.35" x 4.3" x 4.3"
  • Motor type: Brushless DC
  • Max cyles: Open/Cose per day = 3200
  • One operator can handle all AC voltages - Single phase and three phase
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
    • .......more details
OTBH-6112-M-N1

Manaras Trolley Operator 1/2HP 120V 1Ph Monitored w/N1 Photoeyes

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
  • Includes PHOTO-070
    • .......more details
K41-0245-000

LiftMaster BLDC Power/Motor Drive Board IHSL24UL

  • Replacement Brushless DC Power/Motor Drive Board Service Kit
  • Compatible with the following models: INSL24UL INSL24ULMC
IRB-RET-KIT

EMX Industries Universal Retroreflective Photoeye Nema 4X With Hood New UL325-2018 ** To Extent of Inventory

  • Kit includes photoeye with hood reflector with hood and mounting bracket
  • Retroreflective configuration
  • UL325-2018 compliant
  • Six (6) monitoring interfaces
  • 60 ft. operating range
  • Easy installation and set-up
    • .......more details
ZAP-8070

Zap Auto Lock 8070

  • 8070 Auto-Lock provides integrated security with an electronic solenoid locking system that releases a shoot bolt above a roller when door is stopped and withdraws prior to door operation
CP-TRF-110-24-20VA

Lynx Transformer 110/24V-20VA

  • Will work with old 455 Automatic Doorman opener
C-20X14-134-W-OLD

Thermal Window 20" x 14" for 1-3/4" Cedo Original White Old Style

  • For 1-3/4" thick door
  • Old style with round screw heads
  • Glass Dimensions: 17-3/4" x 12-11/32"
  • Hole Size: 18-3/4" x 13-3/8"
  • Exterior Frame: 19-3/4" x 14-3/8"
K41-0247-000

LiftMaster Limit System INSL24UL/IHSL24UL

  • Compatible with the following models: IHSL24UL INSL24UL
ME120-B-4E-P/FT

Miller Edge Sensing Edge Black 4-Wire Monitored End Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
MD-00142

Sprocket 410B17 3/8" Bore NO KW 2SS

HCT12

LiftMaster HCT Rail Only 12'

  • Yellow zinc dichromate premium rail finish offers maximum rust protection in open-air environments.
  • Heavy-duty 12-gauge C channel corrosion resistant steel track.
  • This DOES NOT include the head unit
  • Will open a standard sectional door 11'6" high
SMR7620TP5

Telco Thru Beam Receiver M18

  • Supply voltage: 10 - 30 V dc
  • Control Feature: Sensitivity pot. and light/dark switch
  • Sensing range: 20 m
  • Output Status: N.C./N.O.
  • Housing: 18 x 1 Plastic
  • 5M cable
    • .......more details
RS-55

Roller Shutter Aluminum Model 55 Made to Order Pricing by Quote Only

  • The RS-55 is designed for use in large window roller shutters door recesses and small shopfronts.
  • Robust construction ensures high profiles rigidity while maintaining a well-shaped proportional appearance.
  • The RS-55 profile is available with or without perforation in a wide range of RAL-like colours.
  • The profiles have a very good colour fastness and high resistance to abrasion.
  • This profile is resistant to weathering.
  • Aluminium profiles are ecologically clean products.
    • .......more details
7-6137

Richard-Wilcox 1x#31 Lock Joint Clip

  • Used with #461-0004 track
OSH-6213-CONT-LH

Manaras Opera-SH 3/4 HP 240V 1Ph Contactor Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
OSH-6213-CONT-RH

Manaras Opera-SH 3/4 HP 240V 1Ph Contactor Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
RDOF-311-1/2

Doorlec RDOF Rolling Curtain Fire Door Op. Compact Design w/ECB 1/2 HP 115V 1PH

  • Comes with Mounting Plate for Front of Hood Mount
DEV-RSSD-4000-INS

Devanco Rolling Steel Service Door 4000 20GA Insulated Galvanized Slats **Made to Order

  • Model 4000 Insulated roll up door is complete with a curtain hood guides counterbalance and option for operation such as chain hoist electric operator.
  • The insulation shall consist of closed cell urethane foam injected insulation a minimum of 1 inch thick providing a 7.2 R-value and sound barrier protection with an STC 25 rating.
  • Insulation is pressure foamed in place bonding both the front and back slats while filling all voids and creating a thermal break.
  • Pricing varies according to size and options selected.
RSH-6214-MON-LH

Manaras Rapido Jackshaft Operator 1 HP 240V 1PH W/ Elect. Board N4X Thru Beam Eyes LH

  • High speed heavy-duty v-belt drive industrial operator.
  • Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
  • Two times the speed of the standard jackshaft operator
  • Manages soft-starts and soft-stops
  • Can be wall or shelf mounted on either side of the door
  • Cast iron pillow block bearings
    • .......more details
EHJ-321-1/2

Doorlec Industrial Jackshaft Op. 1/2 HP 230V-1Ph

  • Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
GHW-383-2

Doorlec Industrial Gear Head Door Operator 2 HP 208V 3P with ECB and Nema4 modification

  • Extra heavy-duty industrial-type electric door operator for damp environments.
  • Worm gear reducer 40:1 ratio
  • #50 roller chain and sprockets from operator shaft to door shaft. (#60 chain optional)
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter (also called friction clutch)
  • Rotary type limit switches
    • .......more details
G-10X7-134-W

Thermal Window Clear 10" x 7" for 1-3/4" Garaga Door White

  • For 1-3/4" thick door
CABLEKIT001

Manaras Comm. Receiver Antenna w/15' Coaxial Cable