Devanco Canada - Get The Right Garage Door Opener‎ and Parts

PULL-CHAIN

Pull Chain Spring Only 12" Long

Spring Only for pull chain device
Used with a hand chain for full vertical doors.
Eliminates the need for leaf bumpers

1001-24-GREY

Commercial Side & Top Weather-Strip 24' Long - Grey

Aluminum retainer with grey dual-fin vinyl
Sold by full case quantity (10)

32-48-180

Extension Spring 8' Door - 180 lbs Gold ** Replaced by 27-48-180

Double - Loop
32" long 48" stretch 180 lb load
Springs sold individually

Spec Sheet

25-42-240

Extension Spring 7' Door - 240 lbs Blue w/ clip

Double - Loop end for strength
25" long 42" stretch 240 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-140

Extension Spring 7' Door - 140 lbs Blue

Double - Loop
25" long 42" stretch 140 lb load
Sold individually
Same as part number 114
Rated for 10000 cycles

Spec Sheet

25-42-110

Extension Spring 7' Door - 110 lbs White

Double - Loop
25" long 42" stretch 110 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-20306

Truck Door Balancer Bracket Clamp for Whiting Roll-Up Doors

Steel construction
Plain finish
Clamp includes nuts
Cross Reference: W #2526 for both #2376 & #7176 balancers

27-20127

Truck Door Spring Spacer 35" long for Whiting Roll-Up Doors

Extruded PVC construction with zinc plated thrust washer.
Cross Reference: 2471

26-94521

Truck Door Intermediate Panel (11" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

26-14522

Truck Door Intermediate Panel (12" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

25E10002

Truck Door End Hinge & Roller Cover Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Removable cover allows roller change without hinge removal
Cross Reference: W #1209 T #70162
Box quantity: 50

Z9005

Shaft Key Straight 3" X 1/4"

3" Straight Key
Zinc Plated Steel

R5999

Shaft Collar 1" with 1 Set Screw

Set Screw: 5/16 x 18

SF258

Spring Fitting 2-5/8" Pair

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .3310".
Set screw installed: 3/8"-16 x 1" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on set screws.
Winding bar hole 1/2"

.......more details

CB3160500

Cable 3/16" 7x19 500' Galvanized

Galvanized cable 3/16" 7x19 500ft spool.
Cable break strength: 4200 lbs

Comparison charts

CB5320500

Cable 5/32" 7x19 500' Galvanized

Galvanized cable 5/32" 7x19 500ft spool.
Cable break strength: 2800 lbs

Comparison charts

RS1027

Roller 2" Steel 7" stem 10 ball

Steel Roller Wheel Diameter: 2"
Working Length: 6.25" Overall Length: 7.25"
Box qty: 180 Box weight: 73.5 lbs (2-7-10 steel)

RS1024

Roller 2" Steel 4" stem 10 ball

Steel Roller Wheel Diameter: 2"
Working Length: 3.5" Overall Length: 4.5"
Box qty: 150 Box weight: 53.3 lbs (2-4-10 steel)

25-10101

Truck Door 2" Nylon Roller 3" Shaft for Whiting Roll-up Doors

Zinc plated shaft 10 roller ball design
Shaft Length: 3" Overall Length: 3.75"
Cross Reference: W #3228 T #61424 T #70225
Box quantity: 25

6X12SC50

Devanco Loop 6' x 12' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

4X6PO50

Devanco Loop 4' x 6' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

971LMC

LiftMaster 1-btn Security+ Transmitter 390MHz

390 MHz Security+ single button visor remote
Compatible with Security+ systems with Amber learn button including Chamberlain Sears Craftsman and Raynor code rolling residential openers (Safety Signal) manufactured 1997-2005
Visor clip and Lithium battery included (part #CR2032)
Same as 971LM 91LM 950CB 950CD

Programming Instructions

1104-9FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 9' Long - White (W)

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with cap to hide screws.

14FT-I-BEAM

LiftMaster 14' I-Beam Rail 3714RV / CD1014

I-Beam Chain Drive Rail for model 3595

PPLV1-100

LiftMaster Passport Lite 1-Button Visor Remote with Sec+ 2.0 Technology 100/PKG

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
Sold in a 100 pack

.......more details

Programming Instructions Instructions de programmation Sell sheet Brochure

84284

Marantec Logic Board for Non-EOS Models

For use on M Line- M-4500 and M-4700 models.
For use on Q Line - 7500 and 7700 models.
For use on Martin DC 3500E and DC 3700E models.
Replaces 8054216. Special programming needed. Instructions included

.306_3-3/4"-RH

Torsion Spring .306 x 3-3/4" x 12ft RH Red

Wire size: .306
Inside diameter: 3-3/4"
Length: 12 ft

GAREX-EB-PLATE

Garex End Bearing Plate 3-3/8" Special Order

100MAPS

LiftMaster External Power Supply 110VAC Input 12VDC 2000mA

Provides enough power to operate two LC-36A light curtains.
Includes 38' cable leads

.295-5-1/4-LH-C

Torsion Spring .295 x 5-1/4" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .295 ID: 5-1/4" Length: 12 ft

DGPROX

Erone 1-Door Stand Alone Card Reader / Keypad

500 users (proximity badges and/or codes)
3 operating modes: - Mode 0: badge and code - Mode 1: badge only - Mode 2: badge or code
Audible & Visual feedback
1 request-to-exit input
Tamper switch
1 form C door relay output (3A/125V)

.......more details

Programming Instructions Instructions de programmation Sell Sheet Wireless System Chart

LB1212-18

Laminated Bumper Standard Black 12" L x 18" W 12" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

CB18B0500

Cable 1/8" 7x19 500' Galvanized

Galvanized Cable 1/8" 7x19 500ft spool.
Cable break strength: 2000 lbs

Comparison charts

COMP-VILLERAY-R16

Garex Ready to Install Door Special Order

R16 Insulation - Overlay moldings positioned to create the Compact Villeray design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

BK110/PR

Light Duty End Bearing Plate 3-3/8" with Bearing - EBF 338 Residential Sold as a Pair - LH/RH

With C16-32F bearing
Galvanized steel
3-3/8" shaft offset
Flange allows plate to be bolted to the wall for additional support
Same as part number 209

4005-8FT

Aluminum Retainer only for Heavy Brush 8' Long 180 degree

For angle application (180 degree)
For use with Heavy Brush

PC50CNT20KIT

Carlo Gavazzi Transmitter and Receiver Thru Beam Kit 20m Range (PC50CNT20R and PC50CNT20RP)

Kit includes PC50CNT20R (emitter) and PC50CNT20RP (reciever)
Operates on 12-240 VDC and 24-240 VAC supply voltage.
The PC50CNT20R has a 3 amp relay output
Adjustable sensitivity modulated infrared light make and break (light/dark) switching function LED indications for output ON signal stability and supply ON
Same as Albany 4904R0007 / PC50CNT20RP8M1370

LIMIT006

Manaras Single Micro Limit Switch with Flat Lever

Fits old medium-duty Manaras operators such as MDJ
SPDT - Cherry

Limit Switch Chart

RN1327

Roller 2" Nylon 7" stem 13 ball White Sold per Roller

White Nylon Roller Wheel Diameter: 2"
Working Length: 6.62" Overall Length: 7.59"
Box qty: 100 Box weight: 44.8 lbs (2-7-13 White Nylon)

BRAKE013A

Manaras Band Brake Assembly Kit OSH Nema 4/12

Installation Manual

65_52091-14

LiftMaster Manual Hoist Mod. M8 #41 Chain for 14ft High Door

For 3/4 Hp & 1 Hp Trolley operators
Includes floor level brake release cable 1" x 12' round bar.

Installation Manual

ME00007

Micanan Jackshaft Drive Shaft 1" x 15" L c/w KW

2 required per machine
Sold individually
1" x 15" long

GALV-312-334-144-L

Torsion Spring .312 x 3-3/4" x 12ft LH Galvanized Yellow

Wire size: .312
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

BB

Molded Rubber Bumper Black 24" L x 10" W 4" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
24" L x 10" W 4" Projection

.......more details

ETB-311-1/2HP

Doorlec 1/2HP 115V Trolley Door Opener TEFC Motor

Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.
DC2000 Logic Controller
Comes with standard O/C/S push button station

41D217

Fits model 8550

1016-ADHESIVE

Adhesive for Storm Shield 6oz tube

For use with 1016

Safety data sheet

.306-6-R

Cut-to-Length Torsion Spring .306 x 6" Right Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

2235.296-CUT

Whiting Coldsaver Bottom Panel 14-1/2" x 94-3/4" with lock Topcoat Long Pull Strap & SS package

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide
Includes Lock and keeper

AM-PC

Linear Proximity Cards - Linear Format ACP00739 25/Pkg

The Model AM-PC Proximity Card is a Wiegand format proximity type access control card with a slot for attaching to a key ring use with AM-PR proximity reader.
Passive operation
Low-cost
Durable
25 piece bulk pack minimum order
Dimensions: 3.4" L x 1.9" W x 0.13" Thick

.......more details

ME120-BLK-E-4FT

Miller Edge 2-Wire Black End Outlet 4 ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

Installation Manual Sell Sheet

60-7233

Wheel Chock Tie Back Chain Custom Lengths 3/16" Galvanized Sold by the Foot *** No Longer Available. See 60-7238 as possible replacement

Tie back chain only - Sold by the Foot
3/16" Galvanized

Z9966

Deuer Cable Puller

Light duty wire and cable gripping tool
For wire 1/16" - 1/4" diameter
Recommened for residential use only
1300 lbs. capacity

.234-2-R

Cut-to-Length Torsion Spring .234 x 2" Right Hand Wound Blue/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

620-101416

Linear GTO Alarm 24VDC Non-Pulsed Apex

BL-12

Barlock Kit Complete for 12ft Wide Door Kit includes hardware bag

Kit includes hardware bag and bars (73-1/2")

Assembly Manual

.319-258-R

Cut-to-Length Torsion Spring .319 x 2-5/8" Right Hand Wound Blue/Green

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-258-Installed

MGH-6533-M-N1-LH

Manaras 3/4 HP 600V 3P Jackshaft Monitored w/N1 Eyes Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

GSLG-A-143

Linear Commercial Slide Gate Operator 1 HP 460V 3 Ph - Heater not Included

Integral APeX Controller three-button control station
Variable speed settings- Up to 24" per second (soft start / stop)
Programmable speed control
Direct C-face drive with brake
Power on/off switch
#50 roller drive chain and sprockets

.......more details

FLO2

NICE 2-btn Dip Switch Remote 433.92 MHz

Nice 2 Button 433.92MHz radio-control with programmable code - 1024 combinations.
Contains 10 DIP switches inside for coding.
Battery included: 12V (GP23A)
Dimensions: 72 x 15 x 40 mm

OSHW-6113-1M00

Manaras Opera-SH w/Carwash Mod 3/4HP 120V 1Ph Mon ECB w/N4 Photoeyes Left Hand

A heavy-duty V-belt drive industrial jackshaft operator with Damp Area Modification
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
Solenoid activated Brake

.......more details

D4-36

Extruded Bumper Black 36" L x 4 1/2" W x 3 3/4" H w/Metal Insert

Reinforced prime rubber of Durometer 75 (±5) (ASTM D2240)
8.3 N/mm2 (±0.5) Tensile Strength (ASTM D792)
98% (±2) impact recovery
All extruded fenders are supplied with a metal washer insert
3 holes

PRO-HBH-7581U-R

Micanan 3/4HP 208V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

3/4 HP208V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

K41-0556-000

LiftMaster TECHNA Cabinet Door Grey

Compatibility: Fits LiftMaster TECHNA barrier gate operators

7DUALTROLLEY20

LiftMaster Dual Trolley Mod TDC 7 to 20ft **TDC48-20 CHAIN PACK #48 20 FT RAILS x 111-5220 CRSBARROUND1" X 20' x 110-5820-P TRACKTROLLEYFOR 20FT DOORPRE-PUNCHED x 2DUALTROLLEYMOD48 MOD-KITDUAL TROLLEY48 CHN x 1

Includes: TDC48-20 CHAIN PACK #48 20 FT RAILS x 1 11-5220 CRSBARROUND1" X 20' x 1 10-5820-P TRACKTROLLEYFOR 20FT DOORPRE-PUNCHED x 2 DUALTROLLEYMOD48 MOD-KITDUAL TROLLEY48 CHN x 1

TDC48-16

LiftMaster Trolley Chain Pack #48 700LBS 16ft Door

Chain pack only
TDC48-16 is a #48 Chain Pack Kit for 16 Ft. Trolley Rail Assemblies.
For use with LiftMaster® MAXUM TDC 700 Series Standard-Duty Trolley Commercial Door Operators; installed on 16' commercial doors.

TDC48-10

LiftMaster Trolley Chain Pack #48 700LBS 10ft Door

Chain pack only
TDC48-10 is a #48 Chain Pack Kit for 10 Ft. Trolley Rail Assemblies.
For use with LiftMaster® MAXUM TDC 700 Series Standard-Duty Trolley Commercial Door Operators; installed on 10' commercial doors.

7AUXTROLLEY10

LiftMaster AUX Trolley Mod JDC/JHDC 7 10ft (Incl. TDC48-1 (1) Chain #48 (1) 1"x 12' bar (2) 10-5810-P Tracks

AUX TROLLEY MOD JDC/JHDC 7 TO 10'
7AUXTROLLEY10 is an auxiliary trolley kit for LiftMaster® Maxum JDC and JHDC Commercial Door Standard Duty Operators up to 10 ft.
Provides trolley type operation on standard lift doors (sectional) where side mount operator is preferred over a trolley operator.

TXTA-200

Pulse 3-BTN Transmitter 315MHZ

Three-Button Transmitter: Can be programmed to operate with up to three different receivers to operate up to three doors or for Open Close and/or Stop functions
315mHz: Works with RXTA-100 and RXTA-200 or as replacement unit for other LM receivers with 315MHz frequency.
Provided with visor clip for forklifts and trucks.
FCC Approved

C-24X12-134-LEX-W

Thermal Window 24" x 12" for 1-3/4" Door Lexan White *** Special Order by Quote Only

For 1-3/4" thick door
Glass type: Polycarbonate (Lexan)

MA200

LiftMaster K1 Relay option for MA MAT and MAST Barrier Gate Operators

used with Mega Arm Barrier gate operators to control traffic lights etc

MYQ-KH1VXXW

LiftMaster Smart Garage Video Keypad Power Adapter Kit

Worry-Free Operation: Plug in using the 25-foot power cord for uninterrupted monitoring.
Never needing to charge or replace batteries means your garage is always accessible and secure.
Easy Installation: Set up in minutes with minimal tools required
Whole-Garage Visibility: Use the adjustable swivel mount to position your Video Keypad for maximum visibility.
See more of what you want and thanks to the discrete and concealable power cord see less of what you don’t.
Extended Reach: Position your Smart Garage Video Keypad wherever you want it and use the 25-foot power cord to connect to any standard outlet.

.......more details

SR-9004-WHITE

Elton Reverse Angle Clip-On Vinyl White 200ft Roll

Side Use – Clips onto Steel Jamb
Also for Residential Use

1801.77

Whiting Aluminum U-Channel 96" *** Price by Quote

Special order item. Price by quote only
For bottom seal use item 1676.96

1404-16FT-BLK-XL

Residential Side & Top PVC Weather-Strip with cap 16' Long - X-Wide Black

Extra Wide Profile 2-1/2" wide
Flexible co-extruded cap to hide screws
Dual Fin PVC that seals against the door
Material: Rigid PVC / Flexible PVC Co- Extruded
Colors: Black Brown Bronze Cream Sandstone White
Lengths: 7′ 8′ 9′ 10′ 12′ 16′ 18′

.......more details

2806.182*290

Whiting Spring Assby .182 x 2-3/16 x 29" Roadside

Replacement torsion spring with cones
Specs: .1182 x 2-3/16" x 29" Long
Roadside
For Curbside order part # 2807.182*290

GHX-383-3/4HP-RH

Doorlec Explosion Proof Gear Head 3/4 HP 208V 3PH ECB Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station

BCSI-PM206

Pivin Drapeau Traction Chain #50 BCSI Gate Operator Sold per Foot ** Price by Quote Only

2200-936

Linear VBelt 25 4L Cogged

SOLARKPB

Erone Keypad and Multi-Technology Proximity Reader (125kHz)

The SOLARKPB is a black proximity card reader and keypad geared with a high performance read range
This device is equipped with Wiegand technology and gives visual feedback through its multi-colored LED’s.
Sealed in epoxy this multi-technology reader is compatible with most popular 26-bits Wiegand card encoding

39794A.S

Genie Universal Cable Keeper Kit 39794A.S

Universal Cable keeper kit for Genie Wall Mount garage door openers.
Compatible with models 6070H 6070H-B 6170H 6170H-B 6172H 6172H-B 6072
Genuine Genie Replacement Part

K07-2706

LiftMaster Arm Hub

Also known as: 072706 07-2706 07-2706-1 G072706
For use with various LiftMaster® SW420 Series Swing Gate Operators

MM00078

Micanan Solenoid Lever Limited Duty MSI0094

2400-201

Linear Key 1/4" x 1/4" x 1-1/2"

10TD900INDHH1

BEA 1-Button Digital Transmitter Nema 4 900 MHz

Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
It also provides better penetration of obstacles.
IP65
Operating temperature: -10 to 55C
Controls one 10RD900 receiver

F210B

NICE Adjustable Synchronised Photocells w/Blue BUS Technology Sold as a Pair

Pair of synchronised Photocells with built in transmitter for 8k2 resistive safety edges.
Transmitter is powered by one 3.6 V battery.
Receiver with BUS Connection.
210 degrees horizontal adjustment and 30 degrees vertical.
F210B can only be connected to 'BlueBUS' networks

CP-RE-24-OMRON

Lynx Relay 24V Omron DPDT 10A

502290

Trac-Rite Tube Astragal 502290 Sold per Foot

PDC300-34-1-40-20

Pulse300 Direct Drive Opener 3/4 HP 110/240V 1ph 1" Shaft 40:1 20' Cable ** Price by Quote Only

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

0824-2-WHITE

Elton Commercial Window 2" thick Door 0824 White Frame Sealed Glass

Screw together window kit
Thermal window
Frame size: 23 15/16" x 7 15/16"
Cut-out size: 23-1/8" x 7-1/8""
Vision area: 21-9/16" x 5-1/5"
Different glass options and frame colours are available upon request

.......more details

MULTI-GROOVE

Garex Ready to Install Door Multi-Grooved Special Order

Available with a choice of simple and varied colors this textured woodgrain door will meet your style and requirements for quality and durability
R-16

MB-01204

Micanan Electric Motor Only 1/2HP 575V 3PH

C-Flange motor fits: GT GH GHC GSD

2510-430

Linear Box Power Assemly SW/SL 230V Apex

The 2510-430 is a replacement Linear 208/230V Power Box Assembly
Input Voltage: 220/230/240 AC (60 Hz 1 Phase)

841LM-NOBOX

LiftMaster Automatic Garage Door Lock No Box Connector with 3 pins

Automatic operation performs in tandem with the opener so it always locks and unlocks.
Anywhere assurance smartphone monitoring with the MyQ® App means homeowners always know that the garage is secure
Absolute protection the automatic deadbolt lock makes the garage door virtually impenetrable
Comes included with 8500W
Works on models 8550WLB 8360W 8587W & WLED
same as Part # 001D8875

.......more details

GALV-319-6-R

Cut-to-Length Torsion Spring .319 x 6" Right Hand Galvanized Blue/Green

Spring wire only. Cones and Filler extra

2807.200.280

Whiting .200 x 2-3/16 x 28" Curbside with Cones

TDC48-12

LiftMaster Trolley Chain Pack #48 700LBS 12ft Door

Chain pack only
TDC48-12 is a #48 Chain Pack Kit for 12 Ft. Trolley Rail Assemblies.
For use with LiftMaster® MAXUM TDC 700 Series Standard-Duty Trolley Commercial Door Operators; installed on 12' commercial doors.