Devanco Canada - Get The Right Garage Door Opener‎ and Parts

4580-304-CONT/BRN

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Contemporary Brown 458-70 *** To Extent of Inventory

304ml cartridge
Ideal for movement and perimeters joints
Meets ASTM C920 S NS Class 50 NT M GA O
Meets AAMA 802 and 805 standards
Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
Excellent resistance to UVs for indoor and outdoor use

.......more details

INTERLOCK005

Interlock Switch for Sectional Doors Rail Mount 1 NC Contact

Mounts on the door track to prevent the use of the operator when the door is locked

KCPROXWLC26

Keypad & Multi-Technology Wiegand Proximity Card Reader (125 KHz)

Stainless steel proximity card reader & keypad with back-lit keys
Dust weather and vandal resistant
Can read: Centaur and most popular 26-bits badge & card format
Indoor/Outdoor application
Surface mount
Up to 7.5 cm (3 in) read range

.......more details

50-CP4

LiftMaster Sensing Probe Free Exit 100ft Lead

Self-contained free exit system designed to detect moving vehicle and open your automatic gate.
Can be installed above or below ground
Connects directly to any gate operator without an external output board.
Works with powered or solar gates.
SPECIFICATIONS: Cable Lead Length: 100 ft.
Power Requirements: 8-24 VAC oe 8-30 CSX

.......more details

2376.187*31.930

Whiting Torsion assembly .187 wire size 31" spring length 93" shaft

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

19-60ML-SS

Master Link #60 Stainless Steel

For #60 chain

LRS-DB-50

EMX Direct Burial Sensor with 50 ft Lead Wire

Lead probe ONLY. Requires the LRS-C1 detector
Three-dimensional presence detection of vehicles
Select X Y Z axis independently
Stand-alone sensor
Sensor stores ambient background and settings in non-volatile memory
Includes direct burial sensor and 100 ft of lead wire

.......more details

GT-100A

Skylink Garage One Receiver Rolling Code ***To Extent of Inventory

Automatic door closer: Never forget to close your garage door again.
Built-in timer from 2 minutes to 20 minutes will close the door automatically.
Audio warning when door is about to close.
Kit includes: Monitor Sensor model: GS-101 and Reciever GC-433R
Advanced Rolling Code Technology
Replaces your traditional wall button with Wall Console

.......more details

O02R9999

AirLift Air Opener Chain Kit

Kit includes: (2) aluminum collars with set screws (1) 11-tooth stainless steel sprocket w/keyway (1) chain guide roller kit complete (roller sleeve bolt nut) (1) WP chain complete w/turnbuckle (length 9' chain kit)

BCH501L5R-BZ

LiftMaster 1/2 HP 115/230 VAC 1 PH Commercial Hoist Op L5 Carwash and Roller Bearing Mod. RH ***No Longer Available

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

811LMX

LiftMaster 1-btn Dip-Style Transmitter Sec+ 2.0 Backward Compatible

LiftMaster Programmable DIP single-button remote control.
Programmable to be: Encrypted DIP Security+2.0 (811LM) - Default 315 MHz DIP (361LM) 390 MHz DIP (61LM)
Ideal for applications such as gated communities or commercial applications requiring a large number of remote controls for a common entrance.
Compatible for cloning with 892LT & 894LT Learning Remote Controls.
Easy to program to previous technology.
Battery: CR2032 •

.......more details

Programming instructions Instructions de programmation Product guide

LA500CONTUL

LiftMaster Standard 24VDC Control Box for Single and Dual Gate Applications Batteries Incl. UL325

Complete control box for new LA500U 2018 UL325 compliant
Includes box control board and batteries.

658206

LiftMaster Exterior Pneumatic Treadle Kit 10ft

Outdoor Enclosure (NEMA 4/12)
Includes 10 feet of signal hose outdoor air switch and hose plug
OPEN (all operators) when the vehicle passes over treadle hose. The weight of the vehicle on the treadle hose activates a pneumatic switch which sends an open signal to the door. Requires a 2-wire connection to the operator but does not require power to function.

LDC801

Linear 800 Newton DC Powered Garage Door Opener Accept Both Belt or Chain Rail (LDCO801)

The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
Optional Battery Backup available for added peace of mind. Sold separately
Low-power standby mode dramatically reduces energy consumption
Supplies 800 Newtons of lifting force for heavy doors
Compatible with belt-drive or chain-drive T or I beam rails up to 10'

.......more details

Remote compatibility chart

K10-34758-2

LiftMaster Battery Tray CSL24U

For use with CSL24U
Also known as: K75-34986-2

ALUM-403

Aluminum 24" x 100' Spool Clay/Argile # 403

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 403
Reverse side is #431 Bright White

Colour chart

EHJ-311-1/2

Doorlec Industrial Jackshaft Op. 1/2 HP 115V-1Ph

Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

O22R1004

AirLift Operator Install Kit

HYBRID-BLK-7

Residential Side & Top PVC/Aluminum W/S with cap 7' Long (85") - Black

Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
Dual fin vinyl.
Comes with aluminum slide-on cap to hide screws.

LC-36M

LiftMaster Light Curtain Monitored

The Monitored Light Curtain is a primary safety entrapment protection device that is compliant with UL 325.
IP67 Water-resistant housing anodized aluminum corrosion resistant
Operating Temperature: -40° F to +140° F (-40° C to +60° C)
Liftmaster Compatibility: LOGIC 5.0 Medium-Duty DDO8900W / LJ8900W / LJ8950W / ATSWVFOH HPH1 / HPH2 HCTDCUL Fire Door Egress

Product Guide (EN)Guide du Produit

OWL-RC

EMX Infrared Programming Remote for OWL

OWL-RC is required for programming the OWL Motion Sensor

Quick Start Guide

41C0589-2

LiftMaster Belt Cap Retainer

Also known as: 041C589-2 41A537 41C589-2
For use with various LiftMaster® and Chamberlain® DC Belt Drive Garage Door Opener Models such as 85503
Complete kit includes: Sprocket sprocket cover and replacement screws

SF600S-LEFT

Spring Fitting 6" Pair Stationary + LHW 1" Shaft

Cones for 6" ID Left Hand Wound spring wire
Not universal thread

WB-350

Skylink Multi-Function Wall Console New ATR Model Ops

For use with the Skylink ATOMS AT series garage door openers.
Oversized Push Button for activating the garage door opener.
Activate opener light on/off and the light will remain on until the button is pressed again.
Feature with Lock function to ignore all radio signals for added security.
Illuminated LED indication.
Easy to Install.

.......more details

WD-334642

Wayne Dalton Wireless Keyless Entry KEP4 372MHz

Opens your garage door from the outside by PIN-code
Allows garage access without keys
Wireless for fast and easy installation
Can operate multiple garage door openers at once
Rolling code technology
Weatherproof

.......more details

E402-00-FM

Doorlec Ersce Utility Switch 6A/230V Roller Arm ** Indef. Delivery

Utility switch with a 'NO' and a 'NC' contact
Adjustable arm with roller
Made in Italy

30003

Doorlec Brake Solenoid 115V with wire leads

Works with all 115 Volt Doorlec Commercial and Gate operators

TTC-MODULE

Timer to Close Plug & Play Module

Adjust door closing times from 1 second to 5 minutes
Adjust pre-closing warning times from 2 to 5 seconds
Easy-to use "Plug and Play" connector
Make adjustments using the module's LCD display
Requires installation of monitored entrapment device
111114.500307

.......more details

2807.187*300

Whiting .187 x 2-3/16 x 30" Curbside with Cones

LMHNTG

LiftMaster Rearview Parking Access Hang Tag 25/pkg Random Coded

Rearview mirror hanger gives access to gated facilities complexes for cars trucks and other vehicles
Can be used for larger vehicles with higher cabs as vans various trucks
20-25 foot detection zone
Device is engineered for use with the LIftMaster LMSC1000 Long Range Vehicle Access-Card Reader
Simple transferrable item can be swapped out for rental cars different vans/trucks in a fleet dealer/loaner repair cars and more
Tags are sold in batches of 25. Your location may have a facility code. Check with your maintenance department or administrator if needed

.......more details

Installation manual Manuel d'installation Sell sheet Brochure

LMUNTG

LiftMaster Glass Mount Parking Pass Tag Sold Per Card

A security-enhanced RFID passive transmitter for use with the LIftMaster LMSC1000 Long Range Vehicle Access-Card Reader.
Glass-mount means it can be affixed to either the windshield of a car or to the headlight housing of the vehicle
Aligns with the cone-shaped detection zone from LiftMaster RFID Reader and activates it to open gate barrier
Added security of single mount use: shuts off if removed after adhering to a surface
Use on trucks or other high-clearance larger vehicles; 20-25 ft detection range from reader
Tags are sold in batches of 50. Your location may have a facility code. Check with your maintenance department or administrator if needed

.......more details

Installation manual Manuel d'installation Sell sheet Brochure

31111

Doorlec Sprocket 50B70 2" Bore KW/SS 1/2T

C-24X12-134-LEXBLK

Thermal Window 24" x 12" for 1-3/4" Door Lexan Black

For 1-3/4" thick door
Glass type: Polycarbonate (Lexan)

8550WLB-485

LiftMaster Belt Drive DC Battery Backup Operator Wi-Fi

12V DC motor with integrated battery Backup
Includes battery 485LM
2-100W lights
Electronic Travel Setting and Auto Force
Built in Alert 2 Close
Incl. Smart Control Panel model 880LM 3-btn remote (893MAX)

.......more details

Installation manual Manuel d'installation Sell sheet Brochure Receiver Logic Board Conversion List

DDO8900W

LiftMaster Light Duty Commercial Dock Door Jackshaft Op.

Ideal for commercial applications that require full vertical lift sectional doors with light-duty cycle requirements
Works with myQ® Business™ Facility to analyze and optimize productivity with intuitive control and monitoring capabilities.
LMi5 Interface monitors up to 5 external sensors enabling the DOCK DOOR SESSIONS feature in myQ business facility and visualization of productivity at the dock.
MyQ® Technology enables monitoring and control of the facility operators through a mobile app.
Built-In Wi-Fi® for simple operator internet connection.
Opens 50% faster in the up direction.

.......more details

Installation manual Manuel d'installation Sell sheet Brochure

1004-134-8'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 8 ft**Actual Length 8'2"***

For door thickness 1-3/4"

IS40-XL

BEA Industrial Sensor Low Mount Dual Technology Presence Detection BEA-10IS40XL

Dual technology sensor combining presence and motion detection in industrial applications.
Bidirectional unidirectional approach and unidirectional depart microwave detection options. Six modes of detection filtering and 9 uniqueinfrared patterns for highliy flexible presence detection.
Up to 7 minimum object targets
Adjustable infrared immunity modes to mitigate environmental disturbances (vibrations light and sun)
Mounting height: 6.5ft - 11.5ft
NEMA 4

.......more details

Installation manual Sell sheet Cut sheet

BEA-LZR-I30

BEA Laser Scanner for Ind. Automation Time of Flight Sensor Nema 4

The product configuration provides four laser-based curtains offering a three dimensional safety zone each capable of 360 in x 360 in (30 ft x 30 ft)
Designed for the detection of people and vehicles in both indoor and outdoor environments
The detection accuracy makes this sensor ideal for high performance industrial doors vehicle flow safety perimeter protection and a variety of applications. Detects objects as small as 2 inches at 30 feet away
IP65
Operating temperature: -22 to 140F
Three visible LED spots provide accurate reference points when adjusting the tilt angle.

.......more details

Installation manual Sell sheet

02-103LGO-1

Push Button Station 3-btn Surface Mount O/C/S Nema 1 For LGO Ops only

PBS-3R
Open-Close-Stop
Works with Liftmaster LGO commercial operator
Also known as: 02-103LGO1 02103LGO1
Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D
Normally Open contact on Stop therefore it won’t work on any other LiftMaster operator besides the LGO. The 02-103 will work on all operators.

.......more details

Q238

LiftMaster Gate Adjustment Switch K75-50339

This replacement kit is compatible with the following models: CSW200 CSW200U CSW200UL ROBO SWING

1209

Whiting Roller Hinge Complete

P-0130

Autogate Motor Belt Tensioner Upgrade Kit

This isneeded to change over to their current motor

7001-14-ANODIZED

Commercial Side & Top Weather-Strip 14' Long - Anodized 7001-AB

Anodized galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

RSW-R

Fraba DW-RS-200 Receiver Only 433MHz

the receiver is built into a Nema 4 case
Housing: Small (75x40x13 mm / 2.95x1.57x0.51")

A22KITSKB

Erone Web-Based IP 2-Door Controller SOLARKPB Kit

Atrium 2-Door Controller Kit Web Based IP Hybrid
Module Embedded Web Server Includes 2 SOLAR Keypad/Reader 15 Credential Software
Pre-assembled universal plug-in power supply (120V/240V) included
Convert any A22 door controller to an A22EC elevator controller by simply updating the firmware for free (up to 256 floors)
On-board Ethernet Port with AES 256-bit encryption
Auto-detect hardware modules Quick and easy card enrollment procedure

.......more details

Wireless System Chart

RSW12UL

LiftMaster Res. / Light Comm. DC Swing Gate Operator 12VDC Heater Not Incl.

Includes safety device LMRRUL Monitored Retroreflective Photo Eye enhanced retro-reflect
Features battery backup that provides up to 147 cycles or 63 days of standby power
Smooth Start/Stop Operation and mid-travel reversal extend operator and hardware life.
Heavy-Duty Commercial Gear-Driven Transmission provides unsurpassed reliability.
myQ® Technology enables you to securely control and monitor your gate operator from anywhere
Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.

.......more details

Sell sheet Brochure

AW-10

Miller Edge Air Wave Switch Only No Enclosure

Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion
Sensitivity: 2mm to 500mm
Ambient temperature range: -49F to 180F

.......more details

Instruction manual Sell sheet

REDUCER030

Manaras Reducer CC63-40D Frame 56

41D3058

LiftMaster Electric Motor and Bracket Kit

Complete kit includes: Motor and bracket assembly sprocket RPM sensor grease and bearings
Also known as: 41D3058 41A2821 41A2820 41A3058

M7A

Safety Inertia Brake 1-1/2" Bore 6266 Torque

Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
Ideal for commercial and industrial use; specifically with rolling shutters and rolling doors.
Normal Torque: 6266 lbf.in
Locking Torque: 29199 lbf.in

Reference manual Technical data Sell sheet

MLC-K72

Miller Edge Light Curtain Monitored 6ft Pulsed

Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
Ability to span up to 32' wide
Universal mounting brackets included
IP67 waterproof housing
Operating temperature: -40F to 140F

.......more details

Installation manual Sell sheet

HSLG-121

Linear Commercial Slide Gate Operator 1 HP 230V 1 Ph - Heater not Included

Max duty cycle: Continuous
Integral APeX Controller
Double V-belt to chain reduction
#40 roller chain
Emergency manual disconnect handle
Powder coat finish

.......more details

41D9202

LiftMaster End Panel Driver Board ** Discontinued

041D9202 is a Front End Panel with LED Light Connector/Driver Board Replacement Kit.
For use with LiftMaster® and Chamberlain® Residential Garage Door Openers; manufactured after 2018.
Compatible with the WLED model

883LMW

LiftMaster Door Control Bell Button Wi-Fi

Controls garage door operation and garage door opener lights
On-board programming capability makes it easy to program remote controls and MyQ® enabled accessories
Compatible only with Security+2.0™ LiftMaster® garage door openers enabled by MyQ® technology
Note: If your door control has an image of a light bulb above the light button with 3 wavy lines above it the door control is capable of placing a Wi-Fi Garage Door Opener into Wi-Fi Learn mode.

POWERHINGE

LiftMaster Power Hinge - All Steel Pair

Elite Power Hinge ball bearing hinges for steel swing gate (Pair)
Double 5/8 in. ball bearings for smooth operation
3/4 in. solid stainless steel shaft grounded and tempered to Rockwell standards
Continuous cycle operation self-lubricating/no grease fittings
Offers a unique design so the gate never hits the post
3000 lbs. per pair weight capacity

.......more details

Z9202

E-Z Ratch Kit Torsion Spring Winding System ** No Longer Available

Kit includes:
Two (2) - 21" Extendable Ratchet Handles (extend to a full 30" in length)
All-purpose commercial cone Gear Adapter (double-ended)
Six (6) Cone Adapter Pins One (1) 7/16" One (1) 1/2" Two (2) 5/8" Two (2) 3/4"
Mounting arm spacing allows it to be coupled to spring cone sizes up to 4 3/4" diameter
Compatible with 1” main torsion bar installations

.......more details

Operating instructions

TRMC38E

Telco Light Curtain Bracket 4/pkg

14219

Doorlec Disconnect Arm LJH

.319-334-L-C

Cut-to-Length Torsion Spring .319 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-375-Installed

.295-334-R-C

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

.283-258-R-C

Cut-to-Length Torsion Spring .283 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

.273-334-L-C

Cut-to-Length Torsion Spring .273 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

218758

Torque Force Spring Failure Device 1-1/4" Shaft Left Hand Side

For springs 2" up to 6"
This device can be applied on Industrial OH doors that are manual or motor operated
Must be installed on a keyed shaft

MM-00334

Micanan Bearing Support Plate for 5HP PRO-GH (Reducer 120)

MV-00011

Micanan 3-btn O/C/S w/Key Lock-Out Nema-4 Pushbutton Control Station

Surface mount

PRO-J-10081-U-LH

Micanan 1HP 208V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

.343-258-R

Cut-to-Length Torsion Spring .343 x 2-5/8" Right Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

LMWETXU

LiftMaster Wireless Edge Transmitter Monitored

Connects to wireless edge receiver using low-energy Bluetooth transmission
Sensing distance up to 130 ft
Transmitter accepts up to 2 wired resistive edges
Battery life 2 years
NEMA 4X rated
Compatible with LMWEKITU Wireless Edge Kit and L50 and S50 Monitored Resistive Edges

.......more details

Installation manual Manuel d'installation Product Guide Guide de produit

PRO-J-5053-U-RH

Micanan 1/2HP 575V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

SPRAY-468

Aluminum Touch Up Spray Paint 350g Nutmeg / Brun Muscade #468

350g can

ALUM-568

Aluminum 24" x 100' Spool Nutmeg / Brun Muscade # 568

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 565
Reverse side is #431 Bright White

Colour chart

BG770-50-11

LiftMaster Industrial-Duty Barrier Gate Operator 1/2 HP 115V 1 Ph *Discontinued Replaced by MATDCBB3*

A reliable gear-driven barrier gate operator that is perfect for industrial applications.
This barrier gate supports arm lengths of up to 15 ft.and arms weighing up to 25 LBS
2-btn control station Open/Close
Fully adjustable limit system
Pad mount
Security+ 2.0 technology

.......more details

LR110LTB3815

Telco Thru Beam Receiver M12

Remote receiver Series 110
M12 x 1 Housing Size
Nickel Plated Brass Housing Material
15 m Cable Cable Connection
IP 67 Sealing Class

M2818

Molded Rubber Bumper Black 18" L x 8" W 2" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

.......more details

STRUT-2-1/4-9'-NH

Door Strut 2-1/4" Non Hemmed 9 ft Long *** To Extent of Inventory

Reinforcement bar 2-1/4"
20-GA

LA500-1PKG-XLMU

LiftMaster Residential / Light Comm. DC Swing Gate Op. Extra Large Control Box UL325 (Includes LA500CONTXLMUL (K74-39309-1) LA500DC (2x) 29-NP712 LMRRUL)

LA5001PKGXLMU replaces model LA5001PKGXLMDC
Updated unit complies with new UL325 code revised Jan 2016
System now requires monitored secondary entrapment devices unit will include LMRRU safety photo eye
Includes one LA500 arm XL control box receiver unit and photo eye and 2 -7amp batteries
Residential arm style swing gate operator with Extra Large control box and battery backup system
Battery Backup safeguards your property by providing up to 500 cycles* or up to 24 days* of standby power when the power is down.

.......more details

MM-00035

Micanan Chain Keeper

K1D8387-1CC

LiftMaster Expansion Board UL325

Compatible with various LiftMaster® DC Swing and Slide Gate Operators; manufactured after 2016.
This board is backwards compatible for older second generation units but will require UL325 Entrapment Protection System and Photoelectric Sensors or Edge Sensors.

TRACK-GUARD-60

Track Guard 60" Tall Safety Yellow With Base Sold as a Pair

Provides impact protection to vertical track
45° angle flange adds strength protects from side impact.
7-gauge steel construction powder coated safety yellow for high visibility.
1/4” foot plate drilled with slotted holes for three 1/2” anchors.
Wall flange drilled with slotted holes for four 3/8” anchors
Includes: (right) and (left) sides

.......more details

K1D8388-1CC

LiftMaster Main Control Board Linear Actuators for UL325

This replacement board is compatible with the following models: LA500U LA400U LA412U
Same as 001D8388-1CC
Sticker on board references 001D9040-1CC

8365W-267

LiftMaster Premium Series 1/2 HP AC Chain Drive Wi-Fi

P3 Motors from LiftMaster are reliable durable and powerful – designed specifically for your needs.
Security+ 2.0 – with every click a new code is sent to the garage door opener so that the door opens only for you.
PosiLock locks down your garage door by electronically monitoring against a forced opening.
Alert-2-Close warning system provides audible and visual warnings when the garage door is about to close when using MyQ Technology.
The Protector System has safety sensors that project a light beam across the garage door opening automatically reversing the door if anything interrupts the beam.
Built in Wi-Fi for the easiest way to connect the garage.

.......more details

Installation manual Product guide Guide du produit Receiver Logic Board Conversion List

PRO-GHB50053-PNL

Micanan 5 HP 575V 3 Ph Gearhead with Brake No Controls

Special Order only
No controls in operator- separate panel is required

RVH-6114-ECB-RH

Manaras Rapido Jackshaft Op.1 HP 120V 1 Ph ECB No Eyes Right Hand

The RapidoTM RVH is a high-speed heavy-duty V-belt drive industrial operator designed for use on vinyl rolling doors as well as rolling bug screens.
RVH offers an opening speed up to 30”/sec while smoothly managing Soft-Starts and Soft-Stops therefore reducing the wear and tear of the complete door system.
#41 or #50 roller chain with sprockets selected for an optomized door opening time.
Electrically activated drum-band type solenoid brake.
All electrical components are in a Nema 1 enclosure. Hinged electrical enclosure cover
6-digit electro-mechanical counter mounted inside the control box counts each complete door cycle providing valuable data for maintenance scheduling.

.......more details

RS1311

Roller 3" Steel 11" stem Precision Bearing

Steel Roller Wheel diameter: 3" 11" stem length 7/16" stem dia

OCDFX2

Overhead Door 2-Btn Transmitter 315/390 Mhz

Dual Frequency transmitter that will work on all OHD/Genie brand 315 or 390 rolling code commercial openers including the the RX OHD commercial opener.
Part Number: OCDFX2.S GIDFX2.S

Programming instructions Instructions de programmation

MGH-6537-ECB-RH

Manaras 3 HP 600V 3P Jackshaft with Elect. Circuit Board Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

7001-9-BRONZE

Commercial Side & Top Weather-Strip 9' Long - Bronze (BZ)

Bronze galvanized steel with bronze dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (20)

BD3240

Piezo Warning Buzzer Alarm with Volume Control 24VAC/DC

2-1/2" long 90 DBA

LVB420-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

TRACK-GUARD-24

Track Guard 24" Tall Safety Yellow With Base Sold as a Pair *** NLA

Provides impact protection to vertical track
45° angle flange adds strength protects from side impact.
7-gauge steel construction powder coated safety yellow for high visibility.
1/4” foot plate drilled with slotted holes for three 1/2” anchors.
Wall flange drilled with slotted holes for four 3/8” anchors
Includes: 60-5090 (right) and 60-5091 (left) sides

.......more details

10-1036-4

Whiting 2" Nylon Roller 5" Stainless Steel Shaft for Truck Doors

A Whiting original part
Stainless steel bearings stainless steel shaft

37502

Doorlec DC-2000 Electronic Circuit Board for Constant Pressure Close

Works in all Doorlec model openers except R-99
Input power to board is 120V
24V DC available on terminals 9 & 11
Accessory power on terminals 1 & 11
Programmed to work with constant pressure to close

50-HERK2

Hercules Microwave Motion Detector for Industrial Doors

Opens after sensing an object.
Can be set up to detect vehicles separately from people and bring the two signals to two different outputs
Or use the two outputs to differentiate between forward and backward movements
Detection fields are adjustable - manually or with a remote control (sold separately)
Can be mounted between 8.2' up to 23' with max range of 80'
Reference height of 23' and angle of 45 degrees

.......more details

MWT12

Miller Edge Transmitter RF in Nema 4 Enclosure *** To Extent of Inventory

The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
Response time: nominal 30msec.

.......more details

880LMW

LiftMaster Smart Control Panel Sec+ 2.0 Wi-Fi

Menu-driven panel gives you complete control of the garage door opener; easily view inside garage temperature time and system diagnostics
Equipped with the Maintenance Alert System
On-board programming capability makes it easy to program remote controls and MyQ enabled accessories and adjust settings
Timer-to-Close automatically closes the garage door in 1 5 or 10 minutes; custom setting from 1-99 minutes
Displays Fahrenheit or Celsuis
Motion detector automatically turns on garage door lights when movement is sensed

.......more details

Programming instructions Instructions de programmation

SG-13-NC

Telco Light Curtain with Rectifier Normally Closed 72" (13-193-028-D1-E-H59C-5) ***No Longer Available

Normally Closed
SGR13-193-028-D1-E-HS9-5
SGT13-193-028-D1-E-01-15
1928mm housing 1800mm active height 28 channels NC relay output 15m cable

Specification sheet Wiring diagram

LMTBU

LiftMaster Monitored Through Beam Photo Eye Nema 4X ** To exent of inventory

Meets 2016 UL 325 requirements
Long Range powerful beam provides reliable performance.
Sensing distance up to 90 ft.
Anti-Fogging Lens
NEMA 4X rated
Wireless network mode eliminates the need to wire between operators in dual-gate applications.

.......more details

PRO-TB-5011-U

Micanan 1/2HP 115V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters