Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
.25W8.2

Resistor 1/4 W 8.2K OHM

  • Dimensions (W X H X L) 6 X 15 X 3 CM
02-406-2

LiftMaster Key Set Qty 2

  • Replacement Key ONLY for 02-406 2006-2015 #1 or #1502M
MOTOR255

Manaras Electric Motor 3/4HP 120/240V 1PH

MG00007

Micanan Hex Nylon Lock Nut 6-32UNC

K75-19978-R

LiftMaster Frame Plate Kit Right Hand Disconnect

  • For use with various LiftMaster® Hoist and Jackshaft Commercial Door Operators
CP-SH-58-812

Lynx Complete Output Shaft Assy for TC3

  • Complete assembly with bearings
  • Used to be 8-1/2" long it is now 10-1/2" long will work the same.
422LMC

LiftMaster 2-Channel Co-Axial Receiver 390 MHz ***DISCONTINUED

  • Smart Garage Door Opener® electronics on each channel for fast programming
  • Bell wire attached for easy second channel hook-up
  • 18 - 35VAC/DC
  • FCC certified 390MHz
IS40-XL

BEA Industrial Sensor Low Mount Dual Technology Presence Detection BEA-10IS40XL

  • Dual technology sensor combining presence and motion detection in industrial applications.
  • Bidirectional unidirectional approach and unidirectional depart microwave detection options. Six modes of detection filtering and 9 uniqueinfrared patterns for highliy flexible presence detection.
  • Up to 7 minimum object targets
  • Adjustable infrared immunity modes to mitigate environmental disturbances (vibrations light and sun)
  • Mounting height: 6.5ft - 11.5ft
  • NEMA 4
    • .......more details
Installation manualSell sheetCut sheet
21001

Limit Switch Micro

HSLG-123

Linear Commercial Slide Gate Operator 1 HP 230V 3 Ph - Heater not Included

  • Max duty cycle: Continuous
  • Integral APeX Controller
  • Double V-belt to chain reduction
  • #40 roller chain
  • Emergency manual disconnect handle
  • Powder coat finish
    • .......more details
LM56A

LiftMaster Magnetic Proximity Reed Switch

  • Normally Open magnetic sealed reed switch; proximity switch
  • Used for overhead door contacts.
MA034RDOT

LiftMaster Articulating Square PVC Arm Kit Red/White with Retro-Reflective DOT Tape 9 ft

  • For use on Mega-Arm gate operator
  • Red White reflective DOT stripe
  • 9 ft. x 2.5 in. square includes hardware kit (MA033)
Additional arm accessories
MD-00338

Sprocket 40B15 1" Bore 1/4" KW 2SS

  • 15 tooth sprocket for #40 chain
K180A0357

LiftMaster Reset Switch

  • Compatible with LiftMaster RSW12UL CSW24V swing gate operators
  • Switch to Reset/Disconnect position to disconnect the operator for manual operation
  • Switch to Normal Operation position to return to automatic gate operator functions
  • Dimensions: 3/4" L x 3/8" W x 2" H
RSH-6214-MON-RH

Manaras Rapido Jackshaft Operator 1 HP 240V 1PH W/ Elect. Board N4X Thru Beam Eyes RH

  • High speed heavy-duty v-belt drive industrial operator.
  • Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
  • Two times the speed of the standard jackshaft operator
  • Manages soft-starts and soft-stops
  • Can be wall or shelf mounted on either side of the door
  • Cast iron pillow block bearings
    • .......more details
K77-37853

LiftMaster Cover Assembly with Lock & Keys CSW24U

  • This is a made to order replacement part. Please allow extended lead time due to manufacturing and shipping for all made to order LiftMaster® parts
60-6560-A-YELLOW

Speed Bump Yellow 36" Econo Light Weight for Asphalt **** NLA

  • A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
  • Main pieces may be added and connected to form larger units.
  • 36” long x 10.5” wide x 2” high (main piece)
  • EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
  • Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
  • Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.
    • .......more details
.234-3.5-11.25-LHW

Mini Storage Spring .234 x 3.5" x 11.25" long Looped Ends Left Hand

103-T-8X10-VL

Hardware Set 3" Industrial 103-T for 8' x 10' VL

  • A variety of options and sizes are available call for quote
  • Set includes tracks HD rollers hinges solid shaft drums cables springs and struts if applicable.
BEA-LZR-I30

BEA Laser Scanner for Ind. Automation Time of Flight Sensor Nema 4

  • The product configuration provides four laser-based curtains offering a three dimensional safety zone each capable of 360 in x 360 in (30 ft x 30 ft)
  • Designed for the detection of people and vehicles in both indoor and outdoor environments
  • The detection accuracy makes this sensor ideal for high performance industrial doors vehicle flow safety perimeter protection and a variety of applications. Detects objects as small as 2 inches at 30 feet away
  • IP65
  • Operating temperature: -22 to 140F
  • Three visible LED spots provide accurate reference points when adjusting the tilt angle.
    • .......more details
Installation manualSell sheet
K21-38158

LiftMaster Current Sense Harness Kit 3PH L5

  • This is a Current Sense Harness (230/460/575V) Replacement Kit.
  • Compatible with various LiftMaster® 3 Phase Logic 5.0 Commercial Door Operators; manufactured after February 2016.
  • Complete replacement kit includes: (2) current sense harnesses of different lengths to accommodate all models.
  • Models manufactured before February 2016 DO NOT feature current sense technology.
  • We highly recommend replacing the existing boards with an updated Logic 5.0 system that utilizes current sense technology
  • Refer to the following replacement boards for compatible upgrades: K001D8395 1PH/3PH Logic Board for all L5 models K001D8397 3PH/L5 Power Board 230/460V
    • .......more details
112357.0001

Overhead Logic Board for RSX 3/4 & 1HP 1PH

  • Fits OPRSXH75015BR GCL-H
889LM

LiftMaster MyQ Control Panel with TTC Sec+ 2.0

  • Works with ANY Liftmaster Sears Chamberlain Access Master Master Mechanic Formula I True Value True Guard and Raynor Garage Door Opener Manufactured after 1998 using a amber / orange yellow or purple learn button.
  • Replaces existing control panel
  • Simple programming of new MyQ accessories and Security+ 2.0 remote controls and keyless entry products
  • Motion-activated opener light control
  • Adjustable light timer option
  • Lock feature
    • .......more details
Programming instructionsInstructions de programmationProduct guide
LMPK2-SN

LiftMaster HID ProxKey III 1346 - Sentex Price Per Card ***NLA

  • Universal compatibility with HID proximity card readers
  • Provides an external number for easy identification and control
  • Pocket size key fob
  • HID Sentex 30 Bit Format
  • 125 kHz
  • Sold in Lots of 100
    • .......more details
LIMIT024A

Manaras Double Snap-Action Limit Switch 2xSPDT 46 degree

4004-10FT

Aluminum Retainer only for Heavy Brush 10' Long 45 degree ** To extent of inventory

  • For angle application (45 degree)
  • For use with Heavy Brush
RELAY008

Manaras Relay AB 700-HA33A24 11 Pin TP

  • Allen Bradley
Q076

LiftMaster Turn Buckle Kit K75-50132

  • For Liftmaster trolley operator HCT
109904

Amarr Snap Latch Supply Bag for 2" Thick Doors

  • Is needed when 105380: T-Handle Lock Kit for 2" thick doors is order or the lock won't work.
10.1003.150

Whiting Step Bolt Stainless Steel 1-3/8"

10.1063.9

Whiting S.S Serrated Flange Lock Nut 1/4-20

2996

Truck Door 2" Steel Roller 3" Stem Enclosed Bearings for Whiting Roll-Up Doors

  • A Whiting original
1371

Whiting Complete Bottom Bracket with Cover

050ACTWFATS

LiftMaster Receiver Logic Board AC WiFi for ATSW

  • 050ACTWFATS is a Receiver Logic Board featuring Wi-Fi® with myQ® technology.
  • For use with LiftMaster® Model ATSW AC Chain Drive Light-Duty Commercial/Residential Door Operators; manufactured after 2018.
  • Unit will feature a yellow learn button
050DCJCWFSD

LiftMaster Receiver Logic Board DC. WiFi CJO Sectional

  • 050DCJCWFSD is a 315MHz Security+ 2.0® Receiver Logic Board featuring Wi-Fi® with myQ® technology.
  • For use with various LiftMaster® Light-Duty Series Jackshaft Door Operators for sectional doors; manufactured after 2018.
  • The unit will feature a yellow learn button.
105380

Amarr T-Handle Lock Kit for 2" Thick Doors Black

  • includes exterior & interior locking device with keys
  • this item is requires for use with lock bar or cable snap latch components
  • Need to order 109904 also this is the hardware required for installation or the lock will not work.
MM00026

Micanan Cut-Out Sw. Activation Plate Gearhead (MSI0042)

PRO-GH-15011U-RH

Micanan 1.5 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
PRO-GH-15011U-LH

Micanan 1.5 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
CGH151L5-LH

LiftMaster Gearhead w/ Brake & Carwash Mod. 1-1/2 HP 115/230V 1P L5 - Left Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting except if a Mod is added
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
31118

Doorlec Sprocket 41B12-5/8" Plain Bore

  • Plain bore no keyway
MB-01012

Micanan Electric Motor for Pro LH only 1/2HP 575V 3PH

  • This will only work in the Pro LH operator.
Q118

LiftMaster Access Door Keys Qty 2 K80-50295

  • Also Known as K80-50295
515.06000R01

NICE Octagonal adaptor 60x(0.6/1) Wheel + Crown

0/7140/499

Automatic Systems Frequency Drive ATV 12 0.37KW 120V

  • Frequency drive for AS1620
  • Only available for G2
CP-ST3-WP

Lynx Button Station 3WP English

2524

Whiting Balancer Bracket End - Roadside for Whiting Roll-Up Doors

  • Steel construction
  • Plain finish
  • Cross Reference: W #2524 for #2376 balancer
K30-205-E

LiftMaster Boot Red

  • Also known as: 30-205-E 30205E
  • Replacement button cover for 02-406 station
J753L5

LiftMaster Industrial-Duty Jackshaft 3/4 HP 575V 3Ph L5

  • Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
  • The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • J operators are attached to the door jackshaft to indirectly drive the door
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you
SHAFT120

Manaras Input Shaft for OSHW

41C2760

LiftMaster Chain and Cable Kit 8'

  • Also known as: 1C2760 41C2760 41C2760-1
  • One piece 8 ft. chain and cable replacement kit installed on 8ft garage door
SA1929/A17

Automatic Systems Retrofit Logic Board with Drive for BL229 Board *** Disc

  • Retrofit Assembly for the BL229 board this includes the new logic board with the drive.
  • Comes with E/BLOP/371 which are the loop detectors that go with that board. (no cost for the moment)
16-4L280

LiftMaster Vbelt 4L 28" **to extent of inventory

  • Compatible with LiftMaster® Model SW490GL Swing Gate Operators
GHX-6432-CONT-LH

Manaras Explosion Proof Gear Head 1/2HP 480V-3P Contactor Left Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station
H8NA12

Richards-Wilcox Hinge 8NA x 12 Gauge Roller Bracket

  • Galvanized 12 gauge hinge
H6NA12

Richards-Wilcox Hinge 6NA x 12 Gauge Roller Bracket

  • Galvanized 12 gauge hinge
H7NA12

Richards-Wilcox Hinge 7NA x 12 Gauge Roller Bracket

  • Galvanized 12 gauge hinge
H5NA12

Richards-Wilcox Hinge 5NA x 12 Gauge Roller Bracket

  • Galvanized 12 gauge hinge
K75-19981

LiftMaster Arm Kit Model H/HJ

  • Compatible with LiftMaster® Models H and HJ Commercial Door Operators
ME120-BLK-2WIRE-L

Miller Edge Black 2-Wire NM Left Hand Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
CGH203L5-LH

LiftMaster Gearhead with Brake & Carwash Mod. 2 HP 208/230/460V 3P L5 Left Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
CPT-223-K5

Miller Edge Non-Monitored End Plug Kit

  • For use with the CPT-223-50 bulk extrusion
  • Kit includes: 5 wired 5 Non-Monitored end plugs and 5 1/8oz tube of vinyl adhesive
  • One kit is enough to make 5 non-monitored edges
7-2240

Richards-Wilcox 3" Roller 7/16" Shaft Dia x 9" Long Shaft Super 3 *** Call for Availability

  • Original Richards-Wilcox part
950-189

Richards-Wilcox 2" or 3" Single Bottom Cable Bracket Right Hand

601815

RG6 77% BR Coaxial Cable

  • Black coaxial cable
  • This price is for 1000 feet
0/7530/248

Automatic Systems 5/8 Right Hand Rod End with Zerk

  • Used on the BL229 gate op.
10W8

Resistor 10W 8K OHM

SPRAY-429

Aluminum Touch Up Spray Paint Ice White / Blanc Glacier #429 *** To Extent of Inventory

  • 140g
TRACK-SET-2STD-14

2" Tracks Set 14'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

ME123-2M-BLK-LH

Miller Edge Black LH 2-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
ULTRA-DIN

EMX Industries DIN Rail Mount Vehicle Loop Detector

  • Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
  • Easy to install and setup with the ULTRAMETER™ sensitivity display
  • Low current draw – green product
  • Easy identification of interference problems using the crosstalk and RFI interference display
  • Fits into small operator housings saving space size: 80 x 23 x 84 mm
  • 10 sensitivity settings
    • .......more details
CGH101L5-LH

LiftMaster Gearhead w/ Brake & Carwash Mod. 1 HP 115/230V 1P L5 - Left Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting except when a MOD is added
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
4JW-LEFT

Rolling Steel 3" Curved Cast Windlock 273002 LH

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
60-7531

Fasteners Wedge Anchor 3/4" x 5-1/2" 4/Bag

  • Secure anchoring into concrete brick or block
  • Ideal for mounting dock bumpers
  • 4 per bag
SPR50B36X1

Sprocket 50B36 1" shaft 1/4" KW

  • 36 tooth sprocket for #50 chain
K75-37549

LiftMaster Disconnect Kit for SL595U

  • Compatible with LiftMaster SL595UL heavy-duty vehicular slide gate operators
  • Allows manual operation of your gate operator
2500-2347

Linear Limit Switch SPDT Omron D2VW

RSW12UL

LiftMaster Res. / Light Comm. DC Swing Gate Operator 12VDC Heater Not Incl.

  • Includes safety device LMRRUL Monitored Retroreflective Photo Eye enhanced retro-reflect
  • Features battery backup that provides up to 147 cycles or 63 days of standby power
  • Smooth Start/Stop Operation and mid-travel reversal extend operator and hardware life.
  • Heavy-Duty Commercial Gear-Driven Transmission provides unsurpassed reliability.
  • myQ® Technology enables you to securely control and monitor your gate operator from anywhere
  • Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
    • .......more details
Sell sheetBrochure
BRX10

GDI Brake Kit Brake Kit with Pull-rods; Axial

LMTBUL

LiftMaster Monitored Through Beam Photo Eye w/ Heater Nema 4X

  • Tested and evaluated by UL and meet UL 325 requirements.
  • Long Range powerful beam provides reliable performance.
  • Sensing distance up to 90 ft.
  • Anti-Fogging Lens
  • NEMA 4X rated
  • Wireless network mode eliminates the need to wire between operators in dual-gate applications.
    • .......more details
Installation manualManuel d'installationProduct guide
12502

Doorlec Clutch Plate Aluminum 4" dia x 5/8" bore

  • Works with model LJ/LJH
HAML-RCH-2030

GDI Direct Drive HC410 Nema 1 To Accept 1" Shaft; UL-325 Photo Eyes Extra

G3243

GDI Battery Backup Option G3243

  • BBU option if AC power is lost
H14G01-BLACK

Hinge #1 x 14 gauge Black Powder Coated

  • Black powder coated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • Individually wrapped
BK149/PR

Residential Bottom Bracket RBB-75 sold as a pair

  • For use with 2" straight track
GBU312EF-1

Gate Roller 3-1/2" x 2-3/8" Galvanized Sold Individually

  • Galvanized gate roller with bracket for 3-1/2" upright post
  • Works with gate pipes that are 2-3/8" thick or less
E/1929/071

Automatic Systems Round Arm Ass'y 16'-5" (BL229)

  • Used on the BL229 gate op.
E/BLOP/005

Automatic Systems Standard Tip Support Option

RADIO-RE901A

Manaras 1-Channel 24V Dip-Switch (313MHz) & Rolling Code (390MHz) Receiver with Commercial Antenna

  • For Commercial/Industrial Garage Door Applications
  • Wall Mount
  • DIP Switch and Rolling Code Technology
  • Sixteen (16) Fixed Codes / Receiver
  • 313 MHz & 390MHz Radio Frequency
  • Controls One (1) Door
    • .......more details
Programming instructions
SF375-W

Spring Fitting 3-3/4" Winding Side Only

  • Universal thread for use in either LH or RH wound springs.
  • Maximum wire size diameter: .4062".
  • Set screw installed: 3/8"-16 x 1-1/2" (2).
  • Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
  • Winding bar hole 5/8"
STRUT-2-1/4-16'

Door Strut 2-1/4" Hemmed 16ft Long

  • Reinforcement bar 2-1/4"
OSH-6813-ECB-LH

Manaras Opera-SH 3/4 HP 208V 1Ph with Electronic Circuit Board Left hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
MOD130

Manaras Cogged V-Belt Upgrade

  • The standard v-belt is replaced by a cogged v-belt for added durability
  • Applies to: OSH OTH OTH-A.00 OTBH OTBH-A.00
  • This is available only as an upgrade with the purchase of a commercial op.
112561

Allstar MVP-RE 24V 8 Wire Receiver 288 MHz *** NLA

  • Three channels – three relay outputs
  • 8-wire operator connection
  • Wire whip antenna with “F” connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
  • Codes: 19683
    • .......more details
VMD202-R

EMX Remote Tuning and Adjustment Control Device

  • If you wish to “tune” the sensitivity the accessory VMD202-R will need to be plugged temporarily into the connector.
  • The VMD202-R may then be removed or left in place as desired.
VMD202-50

EMX Vehicle Motion Detector Probe with 50ft Lead Wire

  • The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today.
  • The probe and its electronics are housed in a slim design that is buried next to a driveway.
  • The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine tuning simple
  • Probe assembly and wire are water tight and direct burial compatible
  • Harness is pre-wired onto lead wire for easy installation
  • Settings are placed in a non-volatile memory in case of power failure
    • .......more details
111396.0004

Overhead Brake Kit Model H 1/2HP 1PH

Installation instructions
ESM500

Erone 1200lbs Exterior Maglock Surface Mount Stainless

  • Exterior applications & High-traffic areas
  • Power requirements: 12/24VDC
  • Current Draw: 500mA @ 12VDC 250mA @ 24VDC
  • Monitoring sensor
  • Visual feedback (red & green)
  • Optional L/Z bracket sold separately: LZE500
    • .......more details
Installation manual
SPR41B44-1

Sprocket 41B44-1" shaft

MGH-6435-ECB-LH

Manaras 1.5 HP 480V 3P Jackshaft with Elect. Circuit Board Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection