Devanco Canada - Get The Right Garage Door Opener‎ and Parts

25E10272

Truck Door Stud Plate for Bottom Roller Black E-coat finish for Whiting Roll-Up Doors (2 Stud)

Steel construction Black E-coat finish
Stud plate for 2 stud
Cross Reference: W #2032

GDI-UL325-EYES

GDI Photo Eyes for Monitored Operators N4

K75-12585

LiftMaster Complete Brake Assembly GH 230V

Complete assembly includes: Brake hub kit Brake release lever Brake disk Spring cup Studs Compression springs Brake solenoid Solenoid cover Spacers Mounting plate Pressure plate Feather key and Fastener.
Also known as: 3059004230

115921-01

Wire Harness 66" long

Used on Rite-Hite dock leveler

COUPLING001

Manaras Coupling Light Duty A3032-1

Used with GEAR004

K20-1150C-2LP-H28

LiftMaster Electric Motor 1-1/2 HP 115/230V 1Ph L5

For use with various LiftMaster® Logic 5.0 Gear-Reduced Door Operators
Also known as: 20-1150C-2LP K20-1150C-2LP K20-1150C-2LP-H24

3250

Deadbolt Diecast Case Lock Set w/2 Keys

Includes mounting hardware
Includes 2 regular keys (not Master keyed) Schlage keyway
For use on doors up to 2" thick

Q410

LiftMaster Surge Protector K70-51060

Most commonly used with LiftMaster® SL3000 & CSW200 Models.

WHITING-PLATE-DR

Whiting Special Order Premium Plate Roll Up Door Price by Quote Only

PremiumPlate Roll-up door offers an alternative to plywood.
Polyethelene (PE) composite panels are bonded to prepainted high-tensile steel faces for a durable high impact surfaces.
Tongue and groove joint.
2 cable balancer with independent spring for each cable. Springs treated with rust preventative.
5 rows of hinges.
Patented roller-change hinge design.

.......more details

111421.0003

Overhead Limit Module RSX

26CW945255

Truck Door Intermediate Panel (15.5" x 98") Painted White for Whiting Dryfreight

These panels are 15.50" height x 98" width.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

106-0005

Rodent Block Pull Chain Seal 2"

Often overlooked and left unprotected the opening for the pull chain on dock levelers is an ideal entry point for mice and rats.
The chain provides a built-in ladder for pests and the chain opening is more than big enough for rats or mice to squeeze through.
Features solid cast aluminum construction easy to install and completely cover the chain opening.
The seals are designed to sit completely below the surface of the dock plate and will not interfere with material handling equipment.

GH-383-3/4

Doorlec Industrial Jackshaft Door Operator 3/4 HP 208V 3P with ECB

Custom-designed extra heavy-duty industrial-type electric door operator
Worm gear reducer 40:1 ratio
#60 roller chain and sprockets from operator shaft to door shaft.
Door speed: 7 inches per second (approx.)
Adjustable torque limiter
Rotary type limit switches

.......more details

MOTOR350-WIRED

Manaras Electric Motor 1 HP 120/240V 1Ph Wired

Continuous duty C-flange ODP 60Hz

ME113-C7

Miller Edge PVC Mounting Channel Flat Sold by the Foot

OVIEW-IBT4

NICE Handheld Oview Display Programmer with IBT4 Interface Module OVIEW/A

Required for programming barrier gates

PANORAMIC-FV

Garex Ready to Install Door Special Order

Aluminum Full View door - Factory frame and rail colours are Anodized White and Black - Custom colours can be factory painted - Multiple single pane or insulated glass styles are availavle such as clear tempered tinted frosted gluechip etc - Multiple hardware configurations are available to accomodate site requirements

URBAN-R12

Garex Ready to Install Door Special Order

R12 Insulation - Woodgrain with 1 narrow shadow line at the top and bottom of each panel - Available in steel white or black - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements

WHTG-COLDSAVER

Whiting Special Order ColdSaver Door ** POR

Special order to customer's specs
2-1/8” thick panels built with aluminum facings inside and out for easy cleaning and excellent acceptance of paint and decals.
No rivets on face of door to interfere with lettering or decals.
Aluminum extruded panels .070” thick resist puncture.
Foam-in-place urethane insulation.
Panel joints are double sealed.

.......more details

20449R

Genie Chain Glide Rear Housing Cover

Compatible with models: PCG400 PCG450 PCG500ML PCG600 PCG700ML PCG700FN GCG350L GCG350ML H2000C 1020L 2020L
Contains gear housing cover only

31111

Doorlec Sprocket 50B70 2" Bore KW/SS 1/2T

MGR20-Y-2R-04

Miller Edge Sensing Edge Round Yellow 2-Wire Right Hand Outlet 4ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

41ASWG-489

LiftMaster Cable Repl. Kit 24V 3m with Connector

For use with LiftMaster® Model LA400 Series Commercial Swing Gate Operators

41D0216-2

LiftMaster End Panel with Light Socket

Compatible with LiftMaster® 8550WL & 8360WL Models; and various garage door openers manufactured after 2017 only
Circuit board not included

K75-13074

LiftMaster Straight and Curved Door Arm Kit APT

Compatible with LiftMaster® Model APT trolley Operator

K94-37871

LiftMaster Reset Switch and Harness SL595

For model SL595 slide gate operators

K180A0357

LiftMaster Reset Switch

Compatible with LiftMaster RSW12UL CSW24V swing gate operators
Switch to Reset/Disconnect position to disconnect the operator for manual operation
Switch to Normal Operation position to return to automatic gate operator functions
Dimensions: 3/4" L x 3/8" W x 2" H

902-T-7X9-VL

Hardware Set 3" Industrial 902-T for 7' x 9' VL

A variety of options and sizes are available call for quote
Set includes tracks HD rollers hinges solid shaft drums cables springs and struts if applicable.

MOTOR256

Manaras Electric Motor 1 HP 120/240V 1PH

Continous-duty base mount ODP 60Hz

CB1805000-KOR

Cable 1/8" 7x19 5000' Galvanized Supreme ** Price on request

Galvanized Cable 1/8" 7x19 5000ft spool.
Cable break strength: 2000 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Stainless Steel Cable Specifications

RELAY008

Manaras Relay AB 700-HA33A24 11 Pin TP

Allen Bradley

OPH-6212-ECB-LH

Manaras Opera-H 1/2HP 240V 1Ph with Electronic Circuit Board Left Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

ME00008

Micanan Disconnect Shaft Gearhead 3/4" x 15.75"

PRO-GH-15011U-LH

Micanan 1.5 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

515.06000R01

NICE Octagonal adaptor 60x(0.6/1) Wheel + Crown

41C2760

LiftMaster Chain and Cable Kit 8'

Also known as: 1C2760 41C2760 41C2760-1
One piece 8 ft. chain and cable replacement kit installed on 8ft garage door

H6NA12

Richards-Wilcox Hinge 6NA x 12 Gauge Roller Bracket

Galvanized 12 gauge hinge

0/7530/248

Automatic Systems 5/8 Right Hand Rod End with Zerk

Used on the BL229 gate op.

TRACK-SET-2STD-14

2" Tracks Set 14'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

G3243

GDI Battery Backup Option G3243

BBU option if AC power is lost

2100-564

Linear Clutch Disk Facing HSL HSLG

41A7278

LiftMaster Sprocket Kit 12-Tooth

Includes sprocket and screws

10-10191-GR

LiftMaster Brake Disc

For various Liftmaster commercial slide door operators
Also known as: 10-10191-GR 10-10191-GR 1010191 G105209 10-10191 105209

111396.0004

Overhead Brake Kit Model H 1/2HP 1PH

Installation instructions

MGH-6435-ECB-RH

Manaras 1.5 HP 480V 3P Jackshaft with Elect. Circuit Board Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

BEARING006

Manaras Flange Sealed Bearing 5/8"

Flange sealed bearing for 5/8" shaft

P-75

End Plug for 3/4" ID Rubber Hose

Sold per plug

MX00128

Micanan Clutch Assembly for PRO-GOHD

SF175-S

Spring Fitting 1-3/4" Stationary Side Only 1" shaft

MT22-GRAY-RH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot Gray

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

CP-BRK-WALL

Lynx Wall Bracket Commercial Operators

CP-CLUTCH-D-58

Lynx Clutch Disk 5/8"

K72-12789

LiftMaster Hand Chain Shaft Kit GH (1/2 - 2HP)

Complete with: Bevel Gear 3/4" ID Hand Chain Guice Hand Chain Shaft Bearing 3/4" ID Nyliner Bearing Compression Spring Chain Wheel Washers Roll Pins and E-Rings

PRO-HHD-10053E-R

Micanan 1 HP 575V 3P Heavy-Duty Jackshaft NM ECB No Eyes Right Hand

1 HP575V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Non-Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included
Emergency chain hoist with electrical cut-off for manual operation

.......more details

Installation Manual Specification Sheet

H-0166

Autogate VBelt Banded B-59

New Style Double Reduction

41D8859

LiftMaster Cover 8550WL WLED

Burgundy Replacement Cover.
This one piece cover is compatible with various LiftMaster® Lock Capable Garage Door Openers Powered by myQ®; manufactured after 2017

CB31605000-KOR

Cable 3/16" 7x19 5000' Galvanized Supreme ** Price on request

Galvanized cable 3/16" 7x19 5000ft spool.
Cable break strength: 4200 lbs
A higher quality cable compared to the Chinese cable
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Stainless Steel Cable Specifications

CGH751L5-LH

LiftMaster Gearhead w/ Brake & Carwash Mod. 3/4HP 115/230V 1P L5 - Left Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

C-6X48-134-BLK

Thermal Window 6" x 48" for 1-3/4" Door Black

For 1-3/4" thick door

MOUNTSHAFT017

Manaras Clutch Shaft Kit for MTH MTBH (no pulley) Old Pre-1998

Input / clutch shaft kit for MTH MTBH
For old MTH MTBH with 1" diameter input shaft no pulley included

AVP-1

Ace Type Keyswitch with Aluminum Mounting Plate

Zinc Alloy Die Casted housing and Cylindrical Chrome Plated
Tubular key with 2 keys
60 Combinations Available
Spring Return Type
Recommended for multiple dwellings
Contact ratings: 4 A 125V AC 2A 250V AC

.......more details

93D341

LiftMaster Cover Only Silver for EL25

Also known as 041D0341 41D341
Replacement cover for EL25

.375-6-L-C

Cut-to-Length Torsion Spring .375 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

.363-6-R-C

Cut-to-Length Torsion Spring .362 x 6" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.363-334-R-C

Cut-to-Length Torsion Spring .362 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold separately
For factory installed cones use part no. C-375-INSTALLED

.363-514-R-C

Cut-to-Length Torsion Spring .362 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold separately
For factory installed cones use part no. C-514-INSTALLED

.331-6-R-C

Cut-to-Length Torsion Spring .331 x 6" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones and filler sold seperately
For factory installed cones use part no. C-600-INSTALLED
For spring filler use part no. SPRING-FILLER

.331-6-L-C

Cut-to-Length Torsion Spring .331 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones and filler sold seperately
For factory installed cones use part no. C-600-INSTALLED
For spring filler use part no. SPRING-FILLER

.331-258-L-C

Cut-to-Length Torsion Spring .331 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.319-514-R-C

Cut-to-Length Torsion Spring .319 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-514-Installed

.319-258-R-C

Cut-to-Length Torsion Spring .319 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-258-Installed

.312-514-L-C

Cut-to-Length Torsion Spring .312 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.295-334-L-C

Cut-to-Length Torsion Spring .295 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

.295-2-L-C

Cut-to-Length Torsion Spring .295 x 2" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.273-2-R-C

Cut-to-Length Torsion Spring .273 x 2" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.218-258-L-C

Cut-to-Length Torsion Spring .218 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.207-134-R-C

Cut-to-Length Torsion Spring .207 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

MAG-1

Magnetic Tool Box 3.5" x 3.5" x 5.25"

100lb. magnet which allows it to be easily stuck and removed from a metal surface.
Ideal for use on forklift

PRO-GH-5053U-L

Micanan 1/2HP 575V 3P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-GH-5021U-R

Micanan 1/2HP 230V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand (PRO GHE)

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-HB-7581U-LH

Micanan 3/4HP 208V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

PRO-HB-5083U-RH

Micanan 1/2HP 208V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

PRO-HB-5081U-RH

Micanan 1/2HP 208V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

PRO-HB-5021U-LH

Micanan 1/2HP 230V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

CLIP020

Manaras Pocketwheel Roller Clip

PRO-H-5053-E-LH

Micanan 1/2HP 575V 3P Hoist Operator NM ECB No Eyes Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Solenoid brake OPTIONAL
Non-monitored board NO photoeyes

PRO-H-5023-U-LH

Micanan 1/2HP 230V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

PRO-H-5021-U-LH

Micanan 1/2HP 230V 1P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

PRO-H-5081-U-RH

Micanan 1/2HP 208V 1P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters