Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
SETR2641AM2KH

Erone 2-Channel Mini Transmitter with HID Tag Black 433MHz

  • With built-in HID tag
  • Heavy-duty construction
  • Elegant & easy to carry
  • Unobstructed range: 656 ft (200m)
  • 60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
  • Two lithium batteries (CR2016) included
    • .......more details
Wireless System Chart
PRO-GH-10011U-R

Micanan 1 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
36-54-200

Extension Spring 9' Door - 200 lbs *** Special Order

  • Clipped ends
  • 36" long 54" stretch 200 lb load
.406-514-L-C

Cut-to-Length Torsion Spring .406 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.295-6-R-C

Cut-to-Length Torsion Spring .295 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-600-INSTALLED
LMRT

LiftMaster Remote Test Plate

SPRING043

Manaras Compression Spring

  • Used on OSH OPH waterproof with brake
27222A

Genie Sprocket Bushing *** To extent of Inventory

  • For Genie Chain Drive or Belt Drive Channel Rails.
  • Fits the following models: PMX700 PMX1200 GPS00-IC GPS1200-IC
  • Available to extent of inventory
MM-00327

Micanan L-Bracket Right Angle Front of Coil For Rolling Steel Doors

MD-00487

Micanan Roller Chain #60 Stainless Steel 10' Pack

.312-514-L

Cut-to-Length Torsion Spring .312 x 5-1/4" Left Hand Wound Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
MSC330V53-BULK

Motor Start Capacitor 330V 53-64MF

TB-20

Molded Rubber Bumper Black 3 1/2" L x 6" W 3 1/2" Projection 2-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Molded Truck Bumper molded in one piece and will not warp rust rot or harden.
  • Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
  • 3 1/2" L x 6" W 3 1/2" Projection
DBE-10

Molded Rubber Bumper Black 10" L x 4 1/2" W 3" Projection 2-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
  • Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
  • 10" L x 4 1/2" W 3" Projection
    • .......more details
LB1010-36

Laminated Bumper Standard Black 10" x 36" 10" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-36SF

Steel Faced Laminated Bumper Black 10" x 36" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
PO17

Overhead Door Bottom Astrigal Rubber for Rolling Steel Doors Sold by the Foot

MG00001

Micanan Ribbed Hex Nut 1/2" -13UNC

  • Used on PRO-GHC
  • 4 required per operator
DM120-T/FORCE

Cable Drum High Lift 120" D575-120-1 Pair Torque Force

  • 120" High Lift aluminum die cast alloy cable drums.
  • 3/8"-16 x 2" hardened cup point set screws installed with red heads.
  • Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH.
  • Maximum high lift: 120".
  • Maximum door height: 144" + High Lift.
  • Rated lift per drum: 500 lbs.
    • .......more details
BI-004

Astragal Bottom Cloth Black PVC Sold by the Foot

9004-10

Excalibur Threshold Kit 10'2" x 4" W Solid Aluminum *** Price by Quote Only

  • Stands 1/2" tall
  • Built with 6061-T6 solid aluminum to withstand extreme weight and excessive traffic conditions.
  • Two-way fastening/seal system won’t shift buckle or leak
  • Top V-groove design provides for skid proof protection and improved tire traction on loading docks and incline ramps.
  • The 1/2" diameter wire access port makes it easy for sensor and security installations.
  • The kit comes complete with pre-drilled counter sink holes 3/8" anchors and sealant.
    • .......more details
5001-9-WHITE

Residential Side & Top Weather-Strip 9' Long - White

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
3002-CUT-LENGTH

Gum Hose 1/2" ID Sold per Foot

  • 1/2" inside diameter
  • Installed in bottom "U" rubber for use as a safety edge
CAP-450-540-110V

Capacitor 450-540 MFD 110/125V with Resistor *** To Extent of Inventory

  • Same as CP-CAP-COM-450-540
  • Motor start capacitor
VBELT_5L370

Manaras VBelt 5L 37" - repl. by B34

  • 5L370
GAREX-DOORFACE

Garex Special Order Door Face Only

  • Ordered to the customer's exact requirements
TRACK-GUARD48-NP

Track Guard 48" Tall Safety Yellow Sold as a Pair No Floor Plate

  • Provides impact protection to vertical track
  • 45° angle flange adds strength protects from side impact.
  • 7-gauge steel construction powder coated safety yellow for high visibility.
  • Wall flange drilled with slotted holes for four 3/8” anchors
  • Includes: 60-5106 (right) and 60-50105 (left) sides
TRACK-GUARD-48

Track Guard 48" Tall Safety Yellow With Base Sold as a Pair

  • Provides impact protection to vertical track
  • 45° angle flange adds strength protects from side impact.
  • 7-gauge steel construction powder coated safety yellow for high visibility.
  • 1/4” foot plate drilled with slotted holes for three 1/2” anchors.
  • Wall flange drilled with slotted holes for four 3/8” anchors
  • Includes: 60-5094 (right) and 60-5095 (left) sides
    • .......more details
48"Track Guard Shop Drawing - Left48"Track Guard Shop Drawing - Right
38C

Skylink 1-Button Universal Remote ***NLA

  • Easy to carry or clip on sun visor.
  • Operating range of 100 feet and more.
  • 12V alkaline battery included.
PRO-HB-5011U-LH

Micanan 1/2HP 115V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
SS-1-1/4-24

Solid Shaft 1-1/4" Keyed 24 ft Zinc ** To Extent of Inventory

  • Maximum length for a solid shaft is 24ft
  • Actual length is approx. 24'-1"
MX00137

Micanan PRO-APT Trolley Carriage with Auto Re-Engage Feature (MX00171) *** NLA

  • New part number is MX00171
MWT12

Miller Edge Transmitter RF in Nema 4 Enclosure *** To Extent of Inventory

  • The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
  • It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
  • The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
  • The gate or door stops movement and will then reverse the direction of travel.
  • Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
  • Response time: nominal 30msec.
    • .......more details
MK-00012

Micanan Reversing Relay 24VAC Coil DPDT Flange Mount

D22

Allen Bradley 110V Reversing Contactor

6X18PO50

Devanco Loop 6' x 18' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
GD-STEND-21D

End Cap Steel 18G 21" Double 1-3/4"

MB-01003

Micanan Electric Motor Only 1/2HP 110/220V 1PH C-Flange TEFC 56C

  • C-Flange TEFC electric motor
  • Fits models: GT GH GHC & GSD
CL-74-RH

Wayne Dalton Complete Replacement Barrel Assembly 4.5" Diameter 74" Long

  • Replacement for serial # 10093517-1 PIPESM
BK020/PR-BOLT

Commercial 2" Safety Bottom Bracket with Bolt Sold as a Pair

  • Maximum cable diameter: 3/16"
  • Maximum door weight: 1300 lbs Zinc
  • Plated Steel
  • Sold as a pair
Installation manual
20113R

Genie Limit Switch Screw Drive

  • For use on Genie screw-drive openers.
  • Compatible with ALL Genie Screw and Trac Drive garage door openers with standard rail assemblies
  • Replaces either the UP or the DOWN limit switch
  • Replaces Genie Genius Trac Drive limit switch models 19795S and 22785R
  • Not compatible with excelerator models
CB116A0500

Cable 1/16" 7x7 500' Galvanized

  • Galvanized cable 1/16" 7x7 500ft spool.
RSH-6114-MON-RH

Manaras Rapido Jackshaft Operator 1 HP 120V With Elect. Board N4X Thru Beam Eyes Right Hand

  • High speed heavy-duty v-belt drive industrial operator.
  • Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
  • Two times the speed of the standard jackshaft operator
  • Manages soft-starts and soft-stops
  • Can be wall or shelf mounted on either side of the door
  • Cast iron pillow block bearings
    • .......more details
Installation manualSell sheet
36451A

Genie Front Idler Assembly 36451A.S *** NLA

  • Works on ReliaG 800 2022 2024 2042 ReliaG 600 ChainLift BeltLift 1022 1024 and 1042 Series Units
CS303-FP-50

EMX Car Sense Direct Burial Sensor Flat Pack 50ft ** Replaced by LRS-FP-50

  • Lead probe ONLY. Requires the CS303-C-1 detector.
  • Easy installation above or below ground
  • Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
  • Sensitivity display
  • Single cut installation with flat pack model
C20-32F

Bearing 1-1/4" x 2" Press Fit C20-32F+GR 400 LBS

  • Stamped bearing for lighter loads
  • For a heavier duty machined bearing use R5114
ME123-M-BLK-END

Miller Edge Black End 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
41A8094

LiftMaster Residential Door Arm Kit Straight and Curved Arms

  • Kit contains: Straight arm Curved arm and hardware bag
101475

Insert Bearing 1-1/4" Bore SB206-20

CONTACTOR003

Manaras Repl. Kit Reversing Contactor Allen Bradley 16A-24VAC

Drawing
104255

Allstar Clip only for 8833TC

  • Clip only
OMJ-6112-ECB-L

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board Left Hand

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Floor level disconnect mechanism which must be engaged for manual push-up operation
  • 14 cycles per hour 50 cycles per day
    • .......more details
Installation manualSell sheet
ME111-E

Miller Edge Black End Outlet 7/8" wide x 1-1/2" high Sold by the Foot

  • Slide in style edge for barrier gate and counter shutter application.
  • Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •Temperature Range: -30F to 155F
  • Lead wire: AWM 22 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
  • Vertical or horizontal mount
  • ANSI/UL325 recognized component
    • .......more details
Installation ManualWorksheetSell Sheet
RA-AD-WWS-MULTI

Lynx Wireless Wall Station AD455 372 MHz

  • Wireless for easy installation anywhere
  • Controls door open-close light on-off
  • Programmable pet opening (Opens to a pre-selected height of 6"-30")
  • Vacation Slide-Lock: Disables remote transmitters keyless entries and wall stations.
  • 10-second closing safety delay
  • Transmitter program button
    • .......more details
Programming InstructionsCompatibility chart
MAREDLED17

LiftMaster Red LED Light Stip 13ft Long

  • Provides LED visibility on both sides to 17 ft. arm.
CP-LX100

Lynx Control Board with Cover for UL325 models

  • For all voltages
Programming instructions
3BXT

Control Station Exterior Surface Mount O/C/S N4 Non-Metallic

  • Double pole contacts
  • H=5-3/4" W=2-3/4" D=2-1/2"
  • UL Listed CSA Approved
26-40410

Truck Door T-Style Standard Side Seal 116"

  • Extruded from long lasting rubber
  • Seal protects cargo area from dirt and moisture
  • Used with standard J channel vertical angle with 1" track
  • Length: 116"
  • Cross reference: T #69840 W #4019 620200
MK-00005

Micanan Hoist Disconnect Switch

  • lso know as Cut-Out Switch
SNRRLIGHTJHL

LiftMaster Light Bulbs for MiniKey 10/pkg

  • Light bulbs for recessed keypad
  • Same as SN1650029
37028G.S

Genie Circuit Board for Retail Model 1022 ** Repl. by 39537R.S (no cover)

  • Compatible with Genie 1022 1042 ChainLift 600 and QuietLift 600 models.
  • Purple
50800

LiftMaster RBMA Electric Treadle Nema 4/12 5ft long

  • Five feet long.
  • OPEN only (all LiftMaster operators) or SAFETY only (LiftMaster operators with type B2 C2 L2 T T1 or TS control wiring) after vehicle passes over treadle.
  • The weight of the vehicle compresses an electric switch which sends an open signal to the door.
  • Requires a 2-wire connection to the operator but does not require power to function
97-75003

DOT-C2 Reflective Tape 150 ft x 2" W 6" Red x 6" White Pattern

  • DOT-C2 certified exceeds NHTSA requirements
  • Highly reflective even up to a 90 degree angle
  • Quick and easy to apply
100MAPS

LiftMaster External Power Supply 110VAC Input 12VDC 2000mA

  • Provides enough power to operate two LC-36A light curtains.
  • Includes 38' cable leads
27-48-400

Extension Spring 8' Door - 400 lbs Tan

  • Single - Loop
  • 27" long 48" stretch 400 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-380

Extension Spring 8' Door - 380 lbs Gold

  • Single - Loop
  • 27" long 48" stretch 380 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-100

Extension Spring 8' Door - 100 lbs Tan

  • Single - Loop
  • 27" long 48" stretch 100 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
H12G05-SS

Hinge #5 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
41ASWG-0119

LiftMaster Release Keys for LA400 & LA500 Qty: 2

9003-9FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 3" Track Bolt On 9' Long - Black

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle bolt-on vinyl retainer.
  • Bolts onto reverse angle steel jamb.
Drawing
PD180CBT30MU

Carlo Gavazzi Photoelectric Through-Beam Emitter 30M

  • Emitter only. If receiver is required order PD180CBT30Q
  • For Industrial doors and Gates
  • Range: 30M
  • Relay output
  • Supply voltage emitter: 2 x 3.6VDC lithium batteries
  • Dimensions: 180m x 51 x 49m
    • .......more details
Installation Manual
M003

Rolling Steel Groove Mouth GM679

.363-3-3/4-LH-C

Torsion Spring .363 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .363 ID: 3-3/4" Length: 12 ft
.363-3-3/4-RH-C

Torsion Spring .363 x 3-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .363 ID: 3-3/4" Length: 12 ft
SOLID_SHAFT_16'

Solid Shaft 1" Keyed 16 ft Galvanized

  • Actual length is approx. 16'-1"
1110197

LiftMaster Take Up Bolt 3/8"-16

  • Measures 3-15/16" Long
  • Also known as: G115015 1110197 115015 11-10197
50430

Doorlec Push-Button Station 2 Button Nema 4/12

  • Open / Close Nema 4/12
CARRIAGE006

Manaras Trolley Carriage Aluminum Die Cast

CLUTCHPAD005

Manaras Clutch Pad 5/8" ID 4" OD

  • Made from commercial grey vulcanized fiber
19-41047

LiftMaster Roller Chain #41 47 Pitch w/Link

  • For model T operators
  • Approx. 2-3 ft
41A3589-3

LiftMaster 7ft Belt Assembly for Models '93-2000

  • Full 7' belt assembly for models 1270 1280 and 1280R
776

Fasteners Hex Head Bolt 1/4-20 x 1" 1000/Box

  • 1/4" bolt has 7/16" head
  • Max torque = 6
  • Full thread
  • Grade 5
8X118

Fasteners Wood Screws 1000/Box

  • Ideal for residential weatherstrip
CH501L5-LH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 115/230 VAC Logic 5 Left Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with CPS-UN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
H751L5-LH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 115/230 VAC Logic 5 Left Hand ***Replaced by the RBH751-LH

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
S2TR2641E2M

Erone 2-Channel Master Transmitter 433MHz

  • One master transmitter is required for each multi-user receiver for doing the programming.
  • Range in open space: 850ft or 250 m
  • One 12V lithium battery included
  • Bronze body with yellow buttons.
Sell SheetBrochureWireless System Chart
GTS-16

Garaga Top Seal Single-Fin Black 16ft ** To Extent of Inventory

  • Thermoplastic resin weatherseal co-extruded.
  • For Commercial / Residential applications
  • Screws directly to the top of door no retainer required
MK500GS

LiftMaster MiniKey Stand-Alone Keypad System ** No Longer Available

  • Self-Contained Keypad System for Door and Gated Entrances
  • 500 Code capacity
  • Grained stainless steel Surface Mount
  • Dimension: 4-1/2" H x 4-1/2" W x 3-1/2" D
  • Same as SN7000255
  • Sentex Keypad
    • .......more details
Installation InstructionsProgramming InstructionsSell sheet
P93501100013

Lux 2B Hydraulic Swing Gate Operator 120V UL/CSA

  • Leaf Weight: Up to 660 lbs (300 Kg)
  • Leaf Length: Up to 10ft (3 m)
  • Opening / Closing time: 17 seconds
CPS-RN4

LiftMaster Retro-Reflective Commercial Protector System with Nema 4 Enclosure ** DISCONTINUED

  • Utilizes a sending/receiving retro-reflective photo-eye and a specially designed polarized reflector that increases obstruction detection reliability
  • Polarized photo-eye design for a safe retro-reflective photo-eye system
  • Designed as a normal open circuit but not a self-monitoring system (does not incorporate industrial code technology)
  • Range up to 30 ft - indoor use only
  • 24VAC operation
  • Color: Yellow
    • .......more details
Installation Manual
25-10301

Truck Door Heavy-Duty Cable Anchor Bracket Black for Whiting Roll-Up Doors

  • Steel construction
  • Allows proper rotation of cable head
  • Cross ref: Whiting 5803
08-11013

LiftMaster Bevel Gear 3/4" ID

  • Fits the LiftMaster GH operator
STATION081

Manaras Push Button Control Station 1-Button Nema 4/12

  • 1-button 1 N/O contact
  • Plastic
MK-00493

Reversing Contactor Telemecanique 24V Coil (MK-01179)

  • Same as MK-01179
15-50B18LGH

Sprocket 18 Teeth 1" Bore 1/4" Keyway

.295-2-R

Cut-to-Length Torsion Spring .295 x 2" Right Hand Wound Blue

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.273-2-R

Cut-to-Length Torsion Spring .273 x 2" Right Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
71-199010

LiftMaster 12' Sash Chain Pack with Keyring

  • Common disconnect chain
45DCT

LiftMaster Circuit Board

  • Board: Tri-band Security+ 2.0
  • DC Chain/ Belt Drive model
  • Fits: 8360 8550
  • Also known as; 45DCBR1A 041D7356 1D7356 41DCBC1A 41DCBC3A 41DCCC2A 41DCBC5A 45DCCL5A 45DCCL3A 45DCCL1A 45DCCR5A 41D7356 45DCCR3A 45DCCR1A 001D7356 41DCCC1A 41DCCC3A 45DCJL5A 45DCRL1A 41DCCC5A 45DCRL3A 45DCJL1A 45DCJL3A 45DCBL5A 45DCBL3A 45DCBL1A 45DCBR5A 45DCRL 45DCBR3A 47DCCR1 1D8363 045DCT 45DCBL1 45DCBL2 45DCBL3 45DCBL4 45DCBL5 45DCCL1 45DCCL2 45DCCL3 45DCCL4 45DCCL5 45DCBR1 45DCBR2 45DCBR3 45DCBR4 45DCBR5 45DCCR1 45DCCR2 45DCCR3 45DCCR4 45DCCR5
MK00066

Reversing Contactor Allen Bradley 24V coil

  • Allen Bradley no. 104-C16KJH22-X6
  • Cat. no. 100-C16*10