Devanco Canada - Get The Right Garage Door Opener‎ and Parts

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty •Monitored edge - pls specify the operator edge is connecting to •Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)

EGRESSKIT001

Manaras Egress Device + Hardware

C-514-114-INSTALLED

Cones 5-1/4" 1-1/4" bore Factory Installed (Pair)

For do-it-yourself installation use part no. SF514U-114

41832R.S

Genie Service Head 6070H/B 6170H/B

FOR REPLACEMENT OF JACKSHAFT OPERATOR SHAFT RELEASE OR MOTOR ASSEMBLIES
Head Service Kit for 6070H/6070HB and 6170H/6170HB
Special Order Price by Quote Only
This kit includes the complete motor but does not include the circuit boards transformer or cover for the 6070/6170 unit.

GAREX-PAINT-CHCL

Garex Touch-Up Paint Charcole

AW14K500-18-RF

Miller Edge Air Wave Edge System Trans/Recvr 18ft Non-Monitored

AW14-RF MRF-01 RAH-500 (18') P50 P-50H 218-27-18
AW14-RF-K10 end plug connector plug 1/2”-18 ft. hose

OSH-6212-M-N1-LH

Manaras Opera-SH 1/2 HP 240V 1Ph Monitored w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual

OSH-6212-M-N1-RH

Manaras Opera-SH 1/2 HP 240V 1Ph Monitored w/N1 Eyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual

OSH-6213-M-N1-RH

Manaras Opera-SH 3/4 HP 240V 1 Ph Monitored ECB w/N1 Photoeyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

2704.148_140

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 14" Long

Most common torsion spring for cube trucks
Specs: .148 x 2-3/16" x 14" Long
For Curbside order part # 2705.148*140

2705.148_140

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 14" Long

Most common torsion spring for cube trucks
Specs: .148 x 2-3/16" x 14" Long
For Roadside order part # 2704.148*140

SC-25X15-78-W

Thermal Window 25" x 15" for 7/8" thick Steel Craft Door White

For 7/8" thick door

SP10W12V

LiftMaster Solar Panel Kit 12V 10W

Includes: (1) 10 Watt 12 Volt solar panel
Mounting bracket

301010

Whiting C-4 Anti Lozenge Bracket Curb Side ** Price by Quote Only

301012

Whiting C-4 Anti Lozenge Bracket Road Side ** Price by Quote Only

MC22-2WIRE-RH-BLK

Miller Edge MC22 2-Wire Non-Monitored Right Hand Black Includes Funny Flaps - Sold per Foot

��Electromechanical sensing edge for use on Cornell doors. •The MC22 is manufactured to exact specifications. •The MC22 is completely flexible and will contour to curved surfaces. •Touch sensitive signaling allows immediate reversing or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Vertical or horizontal mount •One year warranty

Worksheet

2705.143_150

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 15" Long

torsion spring for cube trucks with small roll-up door
Specs: .143 x 2-3/16" x 15" Long
For Roadside order part # 2704.143*150

2704.143_150

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 15" Long

Torsion spring for cube trucks with small roll-up doors
Specs: .143 x 2-3/16" x 15" Long
For Curbside order part # 2705.143*150

Q079

LiftMaster Trolley Body Kit K75-50137

For Liftmaster trolley operator HCT

7176.218*29.90

Whiting Heavy Duty Torsion Assembly .218 x 29" shaft 90"

CRBH753L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Left Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

2050Z

LiftMaster HD Roller Cage Bearing Hinge Bolt to Gate/Post Zinc Coated Sold Individually

Heavy Duty Roller Cage Bearing Hinge - Bolt to Gate Bolt to Post (Corrosion Protected Zinc Coated)
Heavy Duty Construction for Maximum Durability
Dependable Roller Cage Bearing Design
Even Weight Distribution
Five Times The Weight-Bearing Surface of the Nearest Large Hinge
Convenient Bolt-On Model

.......more details

CP-CONT-AB

Contactor Allen Bradley 24V

OSH-6534-M-N1-RH

Manaras Opera-SH 1 HP 600V 3 Ph Monitored Board w/N1 Eyes RH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

MOTOR481

Manaras Electric Motor 1 HP 600V 3PH TEFC Brake ** Special Order

HSLG-411

Linear Commercial Slide Gate Operator 3/4 HP 115V 1 Ph - Heater not Included

Great for industrial and commercial applications
Features the APeX control board
Emergency manual disconnect handle
Powder coat finish
Post mount standard; pad mount optional
Integral entrapment sensing system with dual multi-turn precision potentiometers for accurate adjustment and enhanced safety

.......more details

CGH753L5-RH

LiftMaster Gearhead w/ Brake & Carwash Mod 3/4 HP 208/230/460V 3P L5 - Right Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

K94-36408-2

LiftMaster Reset Switch LA400 with ID Resistor

For use with LiftMaster LA400 Series swing gate operators
Includes ID resistor kit
Includes LA400 product ID

MINI-218-3-10-LH-W

Mini Storage Spring .218 x 3" x 10" LH Wagner End ***Price on Request

Special Order. Price valid on in stock springs only

BEARING033

Manaras 605 Ball Bearing 5/8"

27025

Doorlec Electric Motor TEFC 1 HP 115/230V DC101C

BUSHING025

Manaras Bronze Bushing 5/8 x 3/4 x 5/16

2376.156.145.550

Whiting Torsion assembly .156 wire size 14-1/2" spring length 55" shaft

BEARING007

Manaras Flange Bearing ID 1"

Flange bearing for 1" shaft

CABLE_3/8SS-500

Cable 3/8" 7x19 500' Stainless Steel

10TD900INDHH4

BEA 4-Button Digital Transmitter Nema 4 900 MHz

Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
It also provides better penetration of obstacles.
IP65
Operating temperature: -10 to 55C
Controls one 10RD900 receiver

VBELT_4L390

VBelt 4L 1/2" x 39" A37

K07-8007

LiftMaster Arm Hub for BG770/790

Also known as: G078007 07-8007 078007

ETH-311-1/2HP

Doorlec 1/2HP 115V Trolley Door Opener

Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.

BCT751L5CS

LiftMaster 3/4HP 115/230 Volt 1Ph Com. Trolley Operator w/ Brake Carwash and Roller Bearing Mods

New Logic 5
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
MyQ Mobile App is a free download with no annual activation fee.

.......more details

37350

Reversing Contactor CUL - 16 Telco 24V

BEA-10EAGLE

BEA Eagle Motion Sensor 6'-13' Mounting Height *** Replaced by BEA-10EAGLE-ARTEK

Designed for the activation of automatic pedestrian doors
Universally compatible with all makes and models of swinging sliding and revolving automatic doors
Eliminates False Detections: Immunity settings can be adjusted to reduce unwanted detections caused by rain snow and header vibrations
Versatile: Motion detection feature capable of detecting traffic moving as slow as two inches per second
Cable length: 8ft
Temperature Range -4 – 131 °F

.......more details

OGH-6533-M-N1-LH

Manaras 3/4 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

OPH-6112-M-N1-LH

Manaras Opera-H 1/2HP 120V 1Ph Monitored ECB and Nema1 Eyes Left Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

BOARD070MRSH12R

Manaras Replacement Control Board (Monitoring) RSH/RMSJ/RTBH 120V

On-board 390MHz radio receiver accepts 50 remote controls

AFB120

LiftMaster Fire Access Box w/Micro Switch & Knox Key Switch Option

ll-in-one fire access box
Includes: access door with a hole for a standard or fire department padlock interior micro switch knock out for Knox key switch and standard cylinder lock
Two options for automatic gate access: 1) micro switch is activated when the padlock is removed and the front panel is opened or 2) via Knox key switch
NOTE: fire department padlock and Knox switch NOT provided

CRBH755L5-LH

LiftMaster 3/4 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 with Carwash Modification

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

041-0180-000

LiftMaster Wiring Harness Camera/LED Pod Dual Lens

This replacement kit is compatible with the follwoing models: 84501 84602 85702 85702 87504 87802 B4603T B4603TC B6713T B6713TCH B6753T B6753TCH

MQ00011

Micanan 3/32" Aluminum Oval Sleeve Sold per Unit

MR00008

Micanan Disconnect SASH Chain Sold per Pack of 10'

DC750-100

Dyna-Hoist DC Series Direct Drive Opener 3/4 HP 110/240V 1ph ** Price by Quote Only

Direct drive operator with a DC electric motor directly coupled to a hollow shaft (30:1 reduction) worm gear reducer designed to install over keyed door shaft.
Continuous duty 0.75 HP 90 V DC 1750 rpm motor 110 to 240 V 1 PH and 60 Hz power supply.
Integral absolute encoder to control the door travel
24 V 7 amps back-up battery pack and 3/8” ratchet socket to accept and crank for manually operating the door in case of power failure
Programmable wall mountable UL325 compliant NEMA 4X control panel with LCD display and OPEN-CLOSE-STOP buttons on cover
Pulse with modulation programming to provide soft-start soft-stop dynamic brake and speed control

.......more details

Pulse Series Installation Manuals DC Series Brochure

689-LCN

LCN Door Closer 4040-XP Aluminum Finish

Cast iron cylinder with full-complement bearing
3/4" diameter piston
Double-heat treated steel pinion journal
All-weather Liquid X fluid
LCN Patented Green Dial spring force indicator
Universal non-handed

.......more details

10MS31U-B

BEA Magic Switch Touchless Stainless Steel Single Gang

BEA’s MAGIC SWITCH® provides a highly accessible and germ-free door activation without physical contact.
Reduce touchpoints in fast-paced environments that depend on sanitation like healthcare retail industrial and commercial settings.
Using microwave technology BEA’s MS31 produces a detection field with a reliable and consistent transmission in interior and exterior applications.
Capable of detecting a moving hand cart or wheelchair.
Operating temperature: -20 to 55C
IP54

.......more details

2807.171.250

Whiting Spring Assby .171 x 2-3/16 x 25" L Curbside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 25" Long
For Roadside order part # 2806.171.250

2806.171.250

Whiting Spring Assby .171 x 2-3/16 x 25" L Roadside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 25" Long
Roadside
For Curbside order part # 2807.171.250

345.000

Whiting Tongue & Groove Bottom Panel Assembly with Seal/Channel Made to Order. Price on Request

15-1/2" x 96" standard size panel.
Extra wide panels will carry an additional charge
Primer only

2806.177*270

Whiting Spring Assby .177 x 2-3/16 x 27" Roadside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 27" Long
Roadside
For Curbside order part # 2807.177*270

GDI-TML31

GDI Trolley Bracket Only

Add on feature for JDMG-LG op

GDI-LG920

GDI Jackshaft & Trolley JDMG-LG-A830 Nema 4 UL325 Photo Eyes Extra

Low Headroom at 4-3/4" (Trolley)
Dimensions: 11.35" x 4.3" x 4.3"
Motor type: Brushless DC
Max cyles: Open/Cose per day = 3200
One operator can handle all AC voltages - Single phase and three phase
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain

.......more details

GDI-LG910

GDI Jackshaft & Trolley JDMG-LG-2030 Nerma 1 UL325 Photo Eyes Extra

Low Headroom at 4-3/4" (Trolley)
Dimensions: 11.35" x 4.3" x 4.3"
Motor type: Brushless DC
Max cyles: Open/Cose per day = 3200
One operator can handle all AC voltages - Single phase and three phase
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain

.......more details

GDI-HB321

GDI Direct Drive & Jackshaft HAML-RBH-A830 Nema 4 To Accept 1-1/4" Shaft UL325 Photo Eyes Extra

Compact & Light Weight - Fast Installation
Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
Soft start soft stop

.......more details

CGT101L5

LiftMaster Heavy Industrial-Duty Trolley Op. 1 HP 115V w/Carwash Mod. N4

Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
GT operators are directly attached to drive and control the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
High-starting torque continuous duty motor with overload protection
Door speed approx. 11-12 inches per second

.......more details

2376.162.18.770

Whiting Torsion assembly .162 wire size 18" spring length 77" shaft

PD1614B000

NICE Aluminum Flange Bar 300MM Insert For MBAR up to 7M

OTBH-6233-1-M-N1

Manaras Trolley Operator 3/4 HP 208V 3 Ph Monitored w/N1 Photoeyes

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

OTBH-6112-M-N1

Manaras Trolley Operator 1/2HP 120V 1Ph Monitored w/N1 Photoeyes

The OTBH is a heavy-duty low headroom trolley operator
Designed for use on industrial standard lift sectional doors
It incorporates a drum-band type solenoid brake
25 cycles per hour 80 cycles per day
1/2 HP operators come with # 48 (410) roller chain
Includes PHOTO-070

.......more details

OSH-6112-M-N1-RH

Manaras Opera-SH 1/2HP 120V 1Ph Monitored ECB w/N1 Photoeyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
Solenoid activated Brake

.......more details

Installation Manual Sell Sheet

OPH-6112-M-N1-RH

Manaras Opera-H 1/2HP 120V 1Ph Monitored ECB and Nema1 Eyes

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

GHW-353-2-RH

Doorlec Ind. Duty Jackshaft Carwash Op. 2 HP 575V 3P Right Hand

With DC2000 logic board
Worm-Gear Jackshaft type Industrial operator NEMA 4/12

J501L5

LiftMaster Industrial-Duty Jackshaft 1/2 HP 115/230V 1Ph L5

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
J operators are attached to the door jackshaft to indirectly drive the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you