Devanco Canada - Get The Right Garage Door Opener‎ and Parts

41D8260

LiftMaster Cover 8355W

A one piece LiftMaster® "Silver" Replacement Cover.
For use with LiftMaster® 8355W Series AC Belt Drive WiFi® Garage Door Openers

HSLG-123

Linear Commercial Slide Gate Operator 1 HP 230V 3 Ph - Heater not Included

Max duty cycle: Continuous
Integral APeX Controller
Double V-belt to chain reduction
#40 roller chain
Emergency manual disconnect handle
Powder coat finish

.......more details

3BX

Control Station Exterior Surface Mount O/C/S N4 Metal Enclosure

Metal Enclosure
Buttons aligned in a triangular pattern
H=4-3/8" W=4-1/8" D=2-5/8"
2 NO contacts and 1 NC (stop)
Nema 3R 4 12

3BX

CHAIN059

Manaras #41 chain 48 Pitch (24" long)

Includes 1 chain link

111503.0002.S

Overhead Gear Reducer 40:1 RHX

RSH-6214-MON-RH

Manaras Rapido Jackshaft Operator 1 HP 240V 1PH W/ Elect. Board N4X Thru Beam Eyes RH

High speed heavy-duty v-belt drive industrial operator.
Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
Two times the speed of the standard jackshaft operator
Manages soft-starts and soft-stops
Can be wall or shelf mounted on either side of the door
Cast iron pillow block bearings

.......more details

60-6560-C-YELLOW

Speed Bump Yellow 36" Econo Light Weight for Concrete *** NLA

A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
Main pieces may be added and connected to form larger units.
36” long x 10.5” wide x 2” high (main piece)
EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.

.......more details

60-6550-C-BLK

Speed Bump Black 36" Econo Light Weight for Concrete ***NLA

A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
Main pieces may be added and connected to form larger units.
36” long x 10.5” wide x 2” high (main piece)
EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.

.......more details

.234-3.5-11.25-RHW

Mini Storage Spring .234 x 3.5" x 11.25" long Looped Ends Right Hand

746

Fasteners Ribbed Neck Track Bolt 5/16-18 x 3/4" Zinc 1000/box

RELAY008

Manaras Relay AB 700-HA33A24 11 Pin TP

Allen Bradley

109290

Amarr/Alpine Snap Latch Supply Bag for 1 3/8" Thick Doors *** Price by quote only

Is needed when 105381: T-Handle Lock Kit for 1 3/8" thick doors are ordered or the lock won't work.

JB-02

Miller Edge Junction Box Metal

For commercial overhead doors that use coil cords or retracting reels
Standard metal junction box with cover
Includes 1 x 90-degree connector 1 straight connector
Includes strain relief + 2 wire nuts + pop-out holes
For single-angle bottom bar of rolling steel door
Also compatible with sectional door

.......more details

10.1003.150

Whiting Step Bolt Stainless Steel 1-3/8"

41D8198

LiftMaster End Panel with all Labels and Light Socket

End panel works with various models

7001-14-ANODIZED

Commercial Side & Top Weather-Strip 14' Long - Anodized 7001-AB

Anodized galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

41A5635A

LiftMaster Receiver Logic Board 390 MHz ** To extent of inventory

Compatible with a number of dual capacitor chain drive models including 2575 2585 2595 PD752 and PD758S manufactured between 2001 and 2005
Also known as: 41A5483-15 41A5635 01A5635A

D-22A

Linear 1-Channel 1-Button Handheld Transmitter ** Available to extent of inventory

Removable wall mounting clip
Standard digital format: 256 selectable codes
Powered by one 9-volt battery (included)
Current consumption: 12 mA transmitting
RF frequency: 303.875 MHz
Dimensions: 2.16" W x 3.75" H x 0.88" D Order number: SNT00016

.......more details

7205

Whiting Balancer Bracket End - Roadside for Whiting Roll-Up Doors for #7176 Balancer

Steel construction
Plain finish
Whiting original

RA41-1

Aluminum Rail 41 ft

EPC-1

Accessory Hardware Kit for Gate Track for 3-1/2" Pipe *** Price by Quote Only

Includes guides rollers & hardware

7-2240

Richards-Wilcox 3" Roller 7/16" Shaft Dia x 9" Long Shaft Super 3 *** Call for Availability

Original Richards-Wilcox part

601815

RG6 77% BR Coaxial Cable

Black coaxial cable
This price is for 1000 feet

830

Fasteners Wood Screw #8 x 3" Flat Head Course Thread Zinc Plated 1000/Box

Drive style: Robertson / Square head
Plain thread

KP-680-ETL

Koala Air Blower 1/2 HP *** Indef. Delivery

Powerful extra quiet and energy efficient 1/2 HP motor
115V / 1 Speed
Durable super lightweight and compact Polypropylene housing design
ETL/CETL Safety Certified

MD00019

Micanan Sprocket 50B40 X 1" 1/4" KW 2SS 5/16

SBB-3

3" Safety Bottom Bracket Low Tension Sold as a Pair Torque Force

Includes 1-Right hand and 1-Left hand
Zinc plated Steel
Max Door Weight: 2200 LBS
Cable attachment: Fixed
Protective cover: No
Use with: Straight track 3"

.......more details

Installation instructions Instructions d'installation Spec sheet

44-30703

LiftMaster Enclosure SL595

Replacement SL595 Enclosure
Also known as: 44-18491

2500-2347

Linear Limit Switch SPDT Omron D2VW

BK149/PR-BLACK

Residential Bottom Corner Bracket RBB-75 Black Powder Coated sold as a pair

For use with 2" straight track
Individually wrapped

AW-10

Miller Edge Air Wave Switch Only No Enclosure

Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion
Sensitivity: 2mm to 500mm
Ambient temperature range: -49F to 180F

.......more details

Instruction manual Sell sheet

GAL.262-258-144L

delete

26124

Doorlec Clutch Shaft 12-5/8" x 5/8" LJH

Previous shaft size was 11-3/4" but have now been replaced by 12-5/8" to accomodate larger box size

LMRRUL

LiftMaster Monitored Retro Reflective Photo Eye w/Heater 2018 UL325

Features integrated diagnostics with our 2018 UL® 325 Gate Operators.
Versatile Solution for entrapment protection.
Long-Range Sensing Distance of up to 50 ft. (LMRRUL)
Built-In Heater for dependable performance in most environments.
Increased Beam Angle for simple reliable alignment.
Versatile Gimble Bracket for fine alignment and adjustability.

.......more details

Installation manual Manuel d'installation Sell sheet

MX00128

Micanan Clutch Assembly for PRO-GOHD

FLO1

NICE 1-btn Dip Switch Remote 433.92 MHz

Nice 1 Button 433.92MHz radio-control with programmable code - 1024 combinations.
Contains 10 DIP switches inside for coding.
Battery included: 12V (GP23A)
Dimensions: 72 x 15 x 40 mm

JA383

FAAC Sprint 383 Board 115V

BK009

Commercial Top Bracket Adjustable 1-Bolt Tall Sold per Piece

Zinc plated
12 gauge roller carrier and base plate

MK01428

Micanan Digital Countdown Timer

DC-Digital

50442

Doorlec Mushroom Push-Button Red for 1-Door

Capable of opening one door
NEMA 4 Enclosure

50430-KEY

Doorlec PBS 2-Btn O/C and Key Switch On/Off Nema 4/12

Open / Close with On / Off Key Switch Nema 4/12
Green - Open Black - Close

DOC-6000

Atlas Door Operator Board

The Atlas board has been discontinued the Lynx 6000 is a direct replaceement

41A3011

LiftMaster Pulley Only for Cable Pulley Bracket

Also known as: 144A12 144B16

CH503L5-RH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 208-230V/460 VAC 3 PH Logic 5 Right Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes

CP-CLH-58

Lynx Clutch Hub 5/8"

19-4071

LiftMaster Chain #40x71 No Master Link

#40 x 71 pitch no master link
Same as G194071
Compatible with LiftMaster Model SL595GL Slide Gate Operators.

MA011

LiftMaster Magnet

Mega Arm Steel Magnet Assembly for Cam Arm

Q210

LiftMaster Gear Box Kit #70 K75-50224

For use with various LiftMaster® Commercial Swing Gate Operators manufactured after 1997

41A5585

LiftMaster Drive Gear & Sprocket Kit 3/4 HP

Kit includes: Worm gear Helical gear Retainers Washers Pins Bearing plate Grease Detailed instructions
Compatible with Liftmaster 2575 3275 3575 and 3575S models

E/BLOP/276

Automatic Systems Audible Alarm for BL229

CAP425

Capacitor 125VAC 425MFD

Motor Start Capacitor 125V 425 MFD

41D9276

LiftMaster End Panel Logic Board

041D9276 is a End Panel for Receiver Logic Board with LED Light Connector Replacement Kit.
For use with LiftMaster® and Chamberlain® Garage Door Openers Powered by myQ®; manufactured after 2018
Compatible with WLED model

63001015

FAAC Limit Switch Assembly P740-741

For models 740-741

2704.148_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .148 x 2-3/16" x 18" Long
For Curbside order part # 2705.148*180

PHOTO-070

Manaras Monitored Photoelectric Cells N1 Thru-Beam 45' Range

Monitored NEMA 1 enclosure through-beam type photocell
4-Wire
Indoor
Range: 45 ft

Manual

FEP100N

Pneumatic Safety Edge End Caps Included Sold by the Foot

Must specify if L-retainer is required

27020

Doorlec Electric Motor TEFC 1/3 HP 115/230V DC301

MOTOR009

Manaras Electric Motor1/2HP 120/240V 1PH

Instant reverse intermittent-duty electric motor only for MTBL MJ MJH MTH & MTBH models
1725 rpm built-in reset

CP-PW-NM-CDJH

Lynx Pocket Wheel for CDJH Hex Bore OD 6.35"

Same as #2-30-1

MOTOR258

Manaras Electric Motor TEFC 3/4HP 120/240V 1PH

.171-2.188-60-R

Truck Door .171 x 2.188 x 60 RHW

C184-24B

Coil Cord 4 Wire 18-Gauge Black Extends 24ft

2500-2393

Linear Apex I Module

Older model prior to Jan 2016

MP00129

Micanan Up-Charge Track and #41 Chain for 12' h Door PRO-APTC

For 1/2 HP Micanan trolley operator PRO-APTC

SSSS-1-6FT

Solid Shaft 1" Keyed Stainless Steel 6 ft

303 series Stainless Steel

14219

Doorlec Disconnect Arm LJH

MODKIT003

Manaras Time Delay Kit 1.5 Sec For Contactor Models

MODKIT003 for field upgrades
Order MOD003 when ordered in conjunction with a commercial operator

PPLK1

LiftMaster Passport Lite 1-Button Mini Remote with Sec+ 2.0 Technology

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators

ARMP5

LiftMaster DC Power Supply for Intercom/Maglock *** to extent of inventory

SPRING009

Manaras Clutch Spring 5/8"

2520-437-BT-YELLW

Linear Token Acceptor Yellow 12" x 10" Locked Outdoor Encloser

Available in Black White or Yellow
Stand not included

PRO-X_MOD-3HP

Micanan Explosion-Proof Modification N-7/N-9 for 3HP

Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.

36-54-200

Extension Spring 9' Door - 200 lbs

Clipped ends
36" long 54" stretch 200 lb load

.406-6-L-C

Cut-to-Length Torsion Spring .406 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.406-514-L-C

Cut-to-Length Torsion Spring .406 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

.343-334-L-C

Cut-to-Length Torsion Spring .343 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.319-514-L-C

Cut-to-Length Torsion Spring .319 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-514-Installed

.295-334-R-C

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

.283-334-R-C

Cut-to-Length Torsion Spring .283 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

.273-258-L-C

Cut-to-Length Torsion Spring .273 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.250-2-L-C

Cut-to-Length Torsion Spring .250 x 2" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.218-2-R-C

Cut-to-Length Torsion Spring .218 x 2" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

MAG-1

Magnetic Tool Box 3.5" x 3.5" x 5.25"

100lb. magnet which allows it to be easily stuck and removed from a metal surface.
Ideal for use on forklift

MAG-3

Magnetic Accessories Kit 3-Piece Combo

The MagTool clipboard tape gun and box all come with an integral 100lb. magnet which allows them to be easily stuck and removed from a metal surface.

08-9098

LiftMaster Angle Mount Bracket Mounting Clip

LMRT

LiftMaster Remote Test Plate

PRO-HHD-5043U-L

Micanan 1/2HP 460V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

1/2 HP460V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

Installation Manual (EN) Specification Sheet

PRO-HB-7553U-RH

Micanan 3/4HP 575V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

T2-HBAG

Manaras Trolley Hardware Bag

Various fasteners

PRO-HB-5083U-RH

Micanan 1/2HP 208V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

FA-NHEX-58-18-J

Lynx Jam Nut 5/8-18 for MCJH

PRO-H-7543-U-LH

Micanan 3/4HP 460V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

PRO-H-7523-U-LH

Micanan 3/4HP 230V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL