Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
635LMC

LiftMaster Universal Plug-in Receiver 390 MHz ** To Extent of Inventory

  • Compatible with any garage door opener with a simple 2-wire dry contact
  • Includes 2-conductor bell wire
  • Able to accept 8 Security+ transmitters & 1 digital keypad or 1 dip-switch transmitter and 12 billion code transmitters
Programming instructionsInstructions de programmation
41C4470

LiftMaster Gear & Sprocket Assembly for ATS211

  • Complete Gear and sprocket assembly for ATS211 ATS211R built from 1993 - 2003
Installation ManualManuel d'Installation
4A1344

LiftMaster Light Socket Plastic (41C279)

T-733

FL-Allstar 3-btn 3-Door O/C/S Transmitter 107477-311 MHz

  • This transmitter can control (open-close-stop) up to three doors.
  • It has a eight switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 733T (190-107477)
  • Dimensions: 6 1/4" x 3 3/8" x 1 3/8".
Programming Instructions
T-833-C

FL-Allstar 3-btn 9-Door Transmitter 109023-311 MHz***NLA

  • This nine channel transmitter controls up to nine doors (open-close) or three doors (open-close-stop).
  • It has a height switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 8833TC (190-109023)
  • Dimensions: 4 5/8" x 2 1/4" x 7/8"
Programming Instructions
.262_2-5/8"-RH

Torsion Spring .262 x 2-5/8" x 12ft RH Red/Yellow

  • Wire size: .262
  • Inside diameter: 2-5/8"
  • Length: 12 ft
7470.115

Whiting Side Seal for insulated doors 115" Long

  • Fits Coldsaver and Tempguard
308302

Linear 2-Channel Multi-Code Key Ring Transmitter 310 MHz

  • Open/Close remote for 2 doors
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 12-volt battery
  • Codes: 1024 codes for each channel (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
HAE00049

Linear Drive Sprocket Holder and Belt Clamp

232168

Capacitor 3/4 HP 220V 65 MFD

  • For LCO75 only
219109

Capacitor 1/3 HP 43-53 MFD 250V

  • For LDO33 only
4004-16FT

Aluminum Retainer only for Heavy Brush 16' Long 45 degree

  • For angle application (45 degree)
  • For use with Heavy Brush
4007-8FT

Aluminum Retainer only for Light Brush 90 degree

  • For angle application
  • For use with Light Brush or Vinyl Insert.
4006-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
1016-ADHESIVE

Adhesive for Storm Shield 6oz tube

  • For use with 1016
Safety data sheet
1003-1-5/8-14'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
1003-1-5/8-10'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
RCB-2560

Roller Chain Break #25 thru #60

  • Replacement tip included.
24-HWB-PAIR

Winding Bars Hex 24" Set of 2

  • Cold rolled hardened steel.
  • Hex shape keeps the bar from rolling away.
  • Machined to 1/2" at one end with a 5/8" outside dia. on the other end
  • Sold as a pair.
18-HWB-PAIR

Winding Bars Hex 18" Set of 2

  • Cold rolled hardened steel.
  • Hex shape keeps the bar from rolling away.
  • Machined to 7/16" at one end with a 1/2" outside dia. on the other end
  • Sold as a pair.
1104-16FT-SAND

Residential Side & Top PVC Weather-Strip with cap 16' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
7001-14-WHITE

Commercial Side & Top Weather-Strip 14' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
32-48-110

Extension Spring 8' Door - 110 lbs White ** Replaced by 27-48-110

  • Double - Loop
  • 32" long 48" stretch 110 lb load
  • Springs sold individually
Spec Sheet
25-42-90

Extension Spring 7' Door - 90 lbs Light Blue

  • Double - Loop
  • 25" long 42" stretch 90 lb load
  • Sold individually
  • Same as part number 109
  • Rated for 10000 cycles
Spec Sheet
27-20304

Truck Door Cable Drum and Bearing Curbside (RH) for Whiting Roll-Up Doors

  • Black nylon drum with bearing
  • Cable drums are grooved to prevent cables from binding or wearing prematurely.
  • Angle of cable slot determines Left or Right drum (Left = Red)
  • Cross Reference: 2548
26-40200

Truck Door Head Seal Only 96" Long for Roll-Up Doors

  • Seal molded from long lasting rubber
  • Cross Reference: T #69718 630300
26-14525

Truck Door Intermediate Panel (15" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
SF600U

Spring Fitting 6" Pair Universal Thread Stationary + Winding for 1" Shaft

  • Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
  • Pair includes: (1) winding & (1) stationary.
  • Not single thread.
  • Winding bar hole 5/8"
CB332A0500

Cable 3/32" 7x7 500' Galvanized

  • Galvanized cable 3/32" 7x7 500ft spool.
  • Cable break strength: 920 lbs.
Comparison charts
K20-1050C-2P

LiftMaster Electric Motor 1/2 HP Nema 1

4X6PO50

Devanco Loop 4' x 6' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
08-11012

LiftMaster Bevel Gear 5/8" ID

  • Fits LiftMaster GH operator
BC096.2

Whiting ColdSaver Door Bright Stainless Steel Clad

  • Include: Track Balancer Standard Hardware and side top & bottom seals.
  • Replacement for Utility Trailer s/n CS39865
PBTL-3

Exterior 3-Btn O/C/S Control Station with Key Lockout Nema 4

  • Surface mount
  • Metal enclosure
  • Dimensions: 7" H x 2-3/4" W x 3-1/2" D
Sell sheet
.343-3-3/4-LH-C

Torsion Spring .343 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .343 ID: 3-3/4" Length: 12 ft
342.155

Whiting Intermediate Panel Tongue & Groove 15-1/2" x 96" Price on Request

  • Standard size panel primer only
40659R

Genie Universal 4-Button Remote

  • Pre-programmed settings and a unique programming feature give homeowners a simplified compact multi-door and gate option
  • Easy to set up
  • Compatible with most major brands sold in the USA including: Overhead Door Genie Chamberlain Craftsman Ryobi Sommer Linear MegaCode Marantec Wayne Dalton Liftmaster FAAC Xtreme
MCJH-34-115-CON-R

Lynx MCJH Heavy-Duty Jackshaft 3/4 HP 115V Contactor Right Hand ** Replaced by CDJH

  • Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
  • 4L V-belt primary reduction #41 drive chain and sprockets.
  • Adjustable friction clutch magnetic solenoid brake.
  • Fully driven adjustable limit switches.
  • Heavy duty 3 button wall station (Open Close Stop).
  • Adjustable spreader bar assembly included.
    • .......more details
TC2

Tri-Code Transmitter 2-btn Visor - DISCONTINUED

  • Tri-Code series 2 channel transmitter model TC-2
  • 300 & 310 MHz simultaneously
  • Each channel can be set on a seperate code format
  • Works with both 8 and 10 dip switch systems
  • Replacement: 380UT
K94-37694-2

LiftMaster Electric Motor 1 HP for SL585U(L)

  • Replacement motor for SL585101U
1005-1-1/2-16'

Aluminum Bottom Retainer U-Shaped 16' Long

  • For door thickness 1-1/2"
4009-12FT

Aluminum Retainer only for Light Brush 12' Long Reverse Angle

  • For reverse angle rolling steel doors.
  • For use with Light Brush or Vinyl Insert.
K75-18493

LiftMaster Chain Guide Kit

  • Compatible with SL575 SL585 SL595 SL595U SL595UL and IHSL
  • Kit includes chain guide retainers and bracket for guide holders
38874R3.S

Genie Electronic Circuit Board Assembly

  • Replaces board 38001R3.S and 37470R3.S
  • Compatible with Genie Series 3 model 3024 garage door opener systems and Overhead Door Series 3 Model 7030
25-01435

Truck Door Stainless Cables 110" 5/16 eye 7x19 Pair for Roll-Up Doors

  • Works with both Whiting and Todco doors
  • Aluminum eye ends are used (only on 5/16" eye cables)
  • Cable size: 1/8"
IRB-S

EMX Industries Mounting Screws for Photoeyes Sold as a Set of 2

  • Two sets of screws are required for each bracket installed
1003-1-5/8-8'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
.312-2-5/8-LH-C

Torsion Spring .312 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .312 ID: 2-5/8" Length: 12 ft
37520

Doorlec DC-2000 Electronic Circuit Board UL325 Requires Monitored Photocells

  • Works in all Doorlec model openers except R-99
  • Input power to board is 120V
  • 24V DC available on terminals 9 & 11
  • Accessory power on terminals 1 & 11
  • 1 = Stop. 2 = Com. 3 = Open 4 = Close
  • Can be adjusted for constant pressure
    • .......more details
SOLARKPB

Erone Keypad and Multi-Technology Proximity Reader (125kHz)

  • The SOLARKPB is a black proximity card reader and keypad geared with a high performance read range
  • This device is equipped with Wiegand technology and gives visual feedback through its multi-colored LED’s.
  • Sealed in epoxy this multi-technology reader is compatible with most popular 26-bits Wiegand card encoding
2300L

LiftMaster Builder Series Chain Drive DC Motor Wi-Fi Battery Backup

02-401M

LiftMaster 1-Button Control Station

  • For use with various LiftMaster® Logic 4.0/5.0 and MAXUM Series Commercial Door Operator Applications
  • Sends the door to the full open position. Perfect for time sensitive situations.
27118-600V

Doorlec Electric Motor TEFC 2HP 600V 3PH DC224C

  • Frame size is 56C 1725 RPM for worm-gear reducer driven models
BGARM14LED

LiftMaster TECHNA Barrier Gate Arm only 14ft with LED

  • Ships in manageable 6-foot sections for streamlined transport and storage enabling easy on-site assembly
  • Strong aluminum extrusion with reenforced male/female joining sections and fasteners for a secure fit
  • The arm features a bottom channel designed to hold BGARMFOAM thereby minimizing the chance of scratching the vehicle.
  • Compatible with the S50L a wireless edge safety device.
  • IP68 rated waterproof LED lights
  • Operating temperature: -25C - +60 C
    • .......more details
Installation ManualManual d'installation
841LM-NOBOX

LiftMaster Automatic Garage Door Lock No Box Connector with 3 pins

  • Automatic operation performs in tandem with the opener so it always locks and unlocks.
  • Anywhere assurance smartphone monitoring with the MyQ® App means homeowners always know that the garage is secure
  • Absolute protection the automatic deadbolt lock makes the garage door virtually impenetrable
  • Comes included with 8500W
  • Works on models 8550WLB 8360W 8587W & WLED
  • same as Part # 001D8875
    • .......more details
TDC48-12

LiftMaster Trolley Chain Pack #48 700LBS 12ft Door

  • Chain pack only
  • TDC48-12 is a #48 Chain Pack Kit for 12 Ft. Trolley Rail Assemblies.
  • For use with LiftMaster® MAXUM TDC 700 Series Standard-Duty Trolley Commercial Door Operators; installed on 12' commercial doors.
CAPACITOR037R

Manaras Capacitor 340-408uf 165VAC incl. Bleeder Resistor

  • Replacement for capacitor037 on MOTOR256
201-300-401-01-REFRUB

Refurbished 201-300-401-01 Unit

PULLEY015

Manaras Double Pulley

C12

Felco C9 Cable Cutter 3/8" Capacity

  • The FELCO C12 a two-hand wire and cable cutter designed for precision.
  • Made with unbreakable forged aluminum handles and high-quality hardened steel blades
  • The triangular cutting system allows for clean cuts without crushing the cable while the ergonomic design provides comfort and efficiency.
  • Length: 19.69 in
  • Weight: 3.75 lb
  • Cutting diameter: 0.47 in
    • .......more details
12-10883

LiftMaster Nylon Bearing Kit Low Friction 1/2"ID x 1"OD

  • 1/2" ID x 1" x 1" OD
  • Same as K12-10883 1210883
H11G02-SS

Hinge #2 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
MWR22B

Miller Edge 2-Channel Wireless Edge Receiver RF 318 MHz

  • Power source: 12-24 volts AC/DC nominal Nominal 60 mA 140 mA activated
  • Output: N.O. N.C
  • Wire connections: Integral 18” wiring with #6 spade lugs
  • Antenna: Attached wire or F connector
  • LED Indicators: Power channel 1
  • Polycarbonate enclosure
    • .......more details
MGH-6534-M-N1-RH

Manaras 1 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
GALV-375-334-L

Cut-to-Length Torsion Spring .375 x 3-3/4" Left Hand Wound Galvanized Yellow/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
GALV-273-334-L

Cut-to-Length Torsion Spring .273 x 3-3/4" Left Hand Wound Galvanized Orange/Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
DOCK-SEAL-R600

Dock Seal R-600 Adjustable Curtain Seal Price by Quote Only

  • Made to order - Price varies according to specifics
  • This model is ideal for door openings of 8′ wide x 10′ high
  • Standard Seals include two side pads with a fixed head pad and option for an adjustable head curtain.
  • 40 Oz Vinyl
  • Comes with full height yellow guide strips and option for wear flaps
  • Black Blue and Green are stock colors for other colors there will be a surcharge as well as longer production time
    • .......more details
R-600 Order FormCatalogueInstallation Instructions
2110-700

Linear Idler Assy Large Gate

K41-0374-000

LiftMaster 24VDC Motor Gear Box Encoder (Jackshaft 700)

  • Maxum J-700
GX-200-MG

Garex Ready to Install Door Multi-Grooved Special Order

  • 21" panel = 4 grooves 24" panel= 5 grooves
  • COMPLETE JOINT SEAL No air circulation between the panel sections eliminating thermal bridges.
  • Minimize the heat transfer between the inside and outside of your garage.
  • LIGHTWEIGHT AND ROBUST PANEL Polyurethane foam insulation pressure injected between the interior/exterior faces
  • WOOD END BLOCKS Suitable to receive steel end caps
  • HIGH-PERFORMANCE DESIGN Flexible rubber inserted into a PVC reinforced moulding offering a tightly sealed fit to the floor
    • .......more details
MOD050N2

Manaras Friction Clutch Mod. #50 Chain 1-1/4 RGH

  • Installed directly on the output shaft of the operator.
  • Provides added protection by causing the clutch to slip when the door systems requires adnormal torque to be operated.
  • Includes sprocket for #50 chain
  • Operator mounting side must be specified
  • A spreader bar cannot be used in conjunction with this modification
  • This modification applies to RGH ops
    • .......more details
PL-A26-LENS

Lynx Front Light Lens LPL 455+

10BOX45RNDSM

4.5" Round Surface Mount Box

  • 4.5 inch round surface-mount box for 4.5 inch round push plates.
RSH-6814-MON-LH

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes LH

  • High speed heavy-duty v-belt drive industrial operator.
  • Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
  • Two times the speed of the standard jackshaft operator
  • Manages soft-starts and soft-stops
  • Can be wall or shelf mounted on either side of the door
  • Cast iron pillow block bearings
    • .......more details
SB258100-PAIR

Garex End Bearing Plate Reinforced 2-5/8" - 1" Residential Sold as a Pair

TDC7-16

Liftmaster Comm. 16FT Trolley Angle set (10-5816-P x 2) and #48 chain pack (TDC48-16) ***Actual length 227"***

  • Double Angle Rails for doors up to 16'6" high
  • Includes #48 chain pack
TDC7-12

Liftmaster Comm. 12FT Trolley Angle set (10-5812-P x 2) and #48 chain pack (TDC48-12) ***Actual length 179"***

  • Double Angle Rails for doors up to 12'6" high
  • Includes #48 chain pack
70598.000

Todco 1" Nylon WondeRoller

  • Special Order Item
  • Perfect for dry freight applications this roller has been tested to last 5 - 10x longer than a standard roller.
  • A fully sealed bearing to keep dust and debris out
  • 2 Inch Track WonderRoller is a nylon-coated-stem track roller for larger application panel truck doors
  • Polymer vinyl roller head couples with this stem to suit the constant up-and-down and roadway jostling on a freight or other large truck
  • Roller prevents build up in bearings with a sealed external washer
    • .......more details
EMX-1915-1

EMX Single Grey Hood For IRB-MON2/4X2 1 Piece Only

  • Grey coloured metal hood (1 hood)
12-1009

PVC Strip 6" x .060 Standard Clear Smooth for Replacement Strip Curtain Sold per Foot

  • Suitable for most average applications.
  • Temperature Range: -20°F to 150°F (-28° C to 66° C).
  • Formulated with ingredients that meet USDA requirements for incidental food contact.
EHJX-353-1

Doorlec Industrial Jackshaft Op. Explosion Proof 1 HP 575V-3Ph ** Price on Request

  • Explosion proof NEMA 7/9 Heavy-Duty Industrial Operator
  • DC-2000 logic with adjustable Timer To Close Delay On Reverse.
  • Solenoid Brake prevents coasting and secures the door when closed
  • Explosion-proof (sealed) continuous-duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
DC2000

LiftMaster Controller DC2000****Discontinued

  • DC2000 Controller with battery backup
  • BackUp Commercial Vehicular Gate Operator
  • 12VDC - 30 Amps Max.
  • 125 lbs. Max. pull @ CSW-200 Units
  • 105 lbs. Max. pull @ SL-3000 Units
BEA-10-IXIO-ST

BEA Presence Sensor for Automatic Sliding Doors

  • IXIO-ST is an effective versatile and easy-to-use presence sensor for automatic sliding doors.
  • It can be used for both clear door openings and side-lite protection
  • Precise infrared curtains coupled with visible alignment beams make the IXIO-ST extremely safe and easy to adjust.
  • This state-of-the-art sensor features an on-board LCD screen that streamlines the installation and setup processes.
  • Intelligent Solution :On board microprocessor optimizes data analysis monitors sensor performance and enables system integration
  • Mounting height: 6’6” – 11’6”
    • .......more details
2100-765

Linear Shaft Pulley HSLG

GALV-207-2-144-R

Torsion Spring .207 x 2" x 12ft RH Galvanized Brown

  • Wire size: .207
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-262-2-L

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Galvanized Red/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
GALV-234-2-RH

Cut-to-Length Torsion Spring .234 x 2" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
NO_HAR-11

EMX Detector Only No Wiring Harness Included

185002

Marantec Maveo Bluefi Stick

  • The maveo bluefi stick brings Wi-Fi connectivity to your residential garage door openers via phone app or the Internet
  • Compatible only with: Synergy 200 and 300 series IP20 Bluetooth 4.2 also known as 187141 with manufacture date after March 2022.
  • NOTE: Operators manufactured before March 1 2022 require a control board upgrade in order to be compatible with Maveo products and UL 325 unattended operation. (available soon)
MR00001

Micanan Brake Disconnect Cable 3/32" x 12" Long

LM21AFCB

LiftMaster Advance Fire Control Release Device

  • UL 864 Revision 9 compliant.
  • 3 count obstruction cycling.
  • Selectable 10 20 30 or 60-second time delay on alarm.
  • Test key switch – Floor level testing.
  • Motor voltage sensing.
  • Form C relay output.
    • .......more details
400CBAC01

FAAC 400-220V Operator Only ** Price by Quote Only

K41-0247-000

LiftMaster Limit System INSL24UL/IHSL24UL

  • Compatible with the following models: IHSL24UL INSL24UL
3100P

LiftMaster Std Duty Roller Cage Bearing Hinge Flat Mount Prime Coated Sold in Pairs

  • Serrated Adjustable Yoke Design Provides Fast/Easy Adjustability up to .5 in.
  • Dependable Roller Cage Bearing Design
  • Even Weight Distribution
  • Five Times The Weight-Bearing Surface of the Nearest Large Hinge
  • Easy to Fully Lubricate
  • Maximum Gate Weight: Up to 1000 lbs. per pair. Sold in pairs
    • .......more details
SMR7620TP5

Telco Thru Beam Receiver M18

  • Supply voltage: 10 - 30 V dc
  • Control Feature: Sensitivity pot. and light/dark switch
  • Sensing range: 20 m
  • Output Status: N.C./N.O.
  • Housing: 18 x 1 Plastic
  • 5M cable
    • .......more details
2376.187*31.930

Whiting Torsion assembly .187 wire size 31" spring length 93" shaft

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
24114

Doorlec Pocket Wheel (Hoist) Chain Sold per Foot

  • For various Doorlec ops
RDOF-311-1/2

Doorlec RDOF Rolling Curtain Fire Door Op. Compact Design w/ECB 1/2 HP 115V 1PH

  • Comes with Mounting Plate for Front of Hood Mount
DEV-RSSD-4000-INS

Devanco Rolling Steel Service Door 4000 20GA Insulated Galvanized Slats **Made to Order

  • Model 4000 Insulated roll up door is complete with a curtain hood guides counterbalance and option for operation such as chain hoist electric operator.
  • The insulation shall consist of closed cell urethane foam injected insulation a minimum of 1 inch thick providing a 7.2 R-value and sound barrier protection with an STC 25 rating.
  • Insulation is pressure foamed in place bonding both the front and back slats while filling all voids and creating a thermal break.
  • Pricing varies according to size and options selected.
173888

Decorative Hardware Carriage Lock Installation Plate

  • Steel Zinc plated
  • Inside mounting plate for latch system carriage style