Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MG020-B-4E-P/FT

Miller Edge Sensing Edge Black 4-Wire Monitored End Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

3BX

Control Station Exterior Surface Mount O/C/S N4 Metal Enclosure

Metal Enclosure
Buttons aligned in a triangular pattern
H=4-3/8" W=4-1/8" D=2-5/8"
2 NO contacts and 1 NC (stop)
Nema 3R 4 12

3BX

Q076

LiftMaster Turn Buckle Kit K75-50132

For Liftmaster trolley operator HCT

105381

Amarr T-Handle Lock Kit for 1 3/8" Thick Doors Black *** Price by quote only

includes exterior & interior locking device with keys
this item is requires for use with lock bar or cable snap latch components
Need to order 109290 which is the hardware needed for installation or the lock won't work.

K30-205-E

LiftMaster Boot Red

Also known as: 30-205-E 30205E
Replacement button cover for 02-406 station

ERM40600H00

NICE Era MH Tubular Motor 40Nm 14rpm 120/60 12'

There must be at least 0.4 m between the driven parts and any xed elements
If the cable is damaged the appliance must be scrapped. The power cable cannot be replaced

GHX-6432-CONT-LH

Manaras Explosion Proof Gear Head 1/2HP 480V-3P Contactor Left Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station

ETH-A

Doorlec Trolley Type Apartment Op. 1/2 HP 120V Head Only

This operator can be wire to receive radio and photo electric control systems loop detectors etc..
Headroom Required: 2" minimum at doors highest arc of travel

SF514U-114-W

Spring Fitting 5-1/4" Winding Side Only for 1-1/4" shaft

Universal thread for use in either LH or RH wound springs.
Includes: (1) winding side only

MIRCU-02

Miller Edge Universal Non-Monitored Interface

Converts a monitored pulsed signal to a non-monitored normally open signal
Creates a Fail Safe signal; reports a fault when power is lost
Ideal for use with pre-2010 commercial door operators

Installation instructions Sell sheet

LMTBUL

LiftMaster Monitored Through Beam Photo Eye w/ Heater Nema 4X

Tested and evaluated by UL and meet UL 325 requirements.
Long Range powerful beam provides reliable performance.
Sensing distance up to 90 ft.
Anti-Fogging Lens
NEMA 4X rated
Wireless network mode eliminates the need to wire between operators in dual-gate applications.

.......more details

Installation manual Manuel d'installation Product guide

BK000-B/BLACK

Residential Top Roller Bracket Adjustable 2-Bolt Black Powder Coated Sold per Piece

Sold per piece - not sold as a pair
Meant for 2" hardware
Individually wrapped

GBUP412EF-1

Gate Roller 4-1/2" x 2-3/8" Polymer Sold Individually

Polymer gate roller with bracket for 4-1/2" upright post
Works with gate pipes that are 2-3/8" thick or less

MD00077

Roller Chain #40 Sold by the Foot

3EBX

Explosion Proof 3-Btn Pushbutton Control Station

Not rated for division or class
Three button O/C/S Nema-7/9
Surface mount
Dimensions: H=6-1/8" x W=3" x D=4-3/8"

E/BLOP/005

Automatic Systems Standard Tip Support Option

T-831

FL-Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 311 MHz 107483

Open/Close/Stop stationary remote for 1 door.
Designed for commercial automatic door and gate operator applications.
This transmitter can operate a single receiver connected to one operator
Compatible with 3-channel Allstar and MVP receivers
Easy access to battery and coding switch
Power: 9-volt battery

.......more details

CAP378

Capacitor 110/125VAC 378-454MFD

378-454 mF 125 VAC 50/60 Hz
Used on 1/2 HP LiftMaster operators

RBH505L5-LH

LiftMaster 1/2 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 Left Hand ***NLA

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

P-75H

End Plug for 3/4" ID Rubber Air Hose w/ Center Hole Qty 1

Sold per plug

FLO1

NICE 1-btn Dip Switch Remote 433.92 MHz *** Discontinued

Nice 1 Button 433.92MHz radio-control with programmable code - 1024 combinations.
Contains 10 DIP switches inside for coding.
Battery included: 12V (GP23A)
Dimensions: 72 x 15 x 40 mm

CAM017

Manaras Synthetic Disconnect Cam Opera

K72-12591

LiftMaster Clutch Shaft Kit HMJ

SS-STRUT-16

Strut Stainless Steel 2-1/2" x 16ft 16-Ga

MP00227

Micanan Track and #41 Waterproof Chain for 12' h Door

SL595101UL

LiftMaster Dual Voltage Slide Gate Op.1 HP 115/208/230V 1 Phase - Heater NOT Incl. Reflective photocell LMRRUL included****NLA

Power: 115/208/230 VAC. Single Phase.
Accessory power: 24VAC 500mA max.
Monitored safety inputs: 3 Main Board 3 Expansion Board.
Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
Gate travel speed: 12 in. per second.
Security+2.0® on-board radio receiver: Up to 50 remote controls (unlimited with 811LM/813LM).

.......more details

Installation manual Manuel d'installation First step for installation Première étape pour l'installation Sell sheet Wiring diagram Wiring diagram 575V

C9/90-KIT

Felco C9 Parts Kit Only

Parts kit only
Kit consists of main bolt nut counter nut and washer.

WASHER014

Manaras Type A Plain Washer 5/8

K20-3200C-4TP

LiftMaster Electric Motor 1-1/2 HP 230/460V 3PH CF TEFC

Also known as: K20-3200C-4TP 20-3150C-4T K20-3200C4T 20-3200C-4T

C-26-1/2X14-134-W

Thermal Window 26-1/2" x 14" for 1-3/4" Cedo Door White

For 1-3/4" thick door

K94-37848-1

LiftMaster Electric Motor 1HP

Replacement motor for SL595101U

.262-258-L

Cut-to-Length Torsion Spring .262 x 2-5/8" Left Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

SETR2641AM2KH

Erone 2-Channel Mini Transmitter with HID Tag Black 433MHz

With built-in HID tag
Heavy-duty construction
Elegant & easy to carry
Unobstructed range: 656 ft (200m)
60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
Two lithium batteries (CR2016) included

.......more details

Wireless System Chart

GH-6533-0000-CBOX

Manaras Control Box for GH 600V

Control box only

25-42-190

Extension Spring 7' Door - 190 lbs Light Blue

Single - Loop
25" long 42" stretch 190 lb load
Sold individually
Rated for 10000 cycles

.393-6-R-C

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.319-6-R-C

Cut-to-Length Torsion Spring .319 x 6" Right Hand Wound Coated ** Price by Quote Only

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-600-Installed

.283-334-L-C

Cut-to-Length Torsion Spring .283 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

.250-134-L-C

Cut-to-Length Torsion Spring .250 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.234-258-L-C

Cut-to-Length Torsion Spring .234 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

ME116-BLK-U

Miller Edge Black Universal Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide-in edge for sectional doors.
With appropriate mounting channel this edge will fit nearly all doors from 1-1/2" to 2" thick. The ME116 has been designed to fit all CHI doors with double track bottom retainers.
ME116 is resistant to flame water and most common greases and oils
Soft ends
Temperature range -30F to 155F
Lead wire: 22 gauge universal

.......more details

PRO-HB-5038U-RH

Micanan 1/2HP 380V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

PRO-HB-5023U-LH

Micanan 1/2HP 230V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

PRO-HB-5021U-LH

Micanan 1/2HP 230V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

LA412XL20W

LiftMaster Single Arm Solar Package for LA412DC XL Gate Operator UL325 ***Includes (1x) K94-37236 Solar Harness (1x) SP20W12V Solar Panel (1x) LMRRUL Photo Eye (1x) A12330SGLPK Battery (12V) (1x) LA412DC Actuator Arm (1x) XLSOLARCONTUL Control Box

Access your property like never before. With MyQ® Technology you can monitor and control your gate from anywhere and get in quickly and securely with the built-in interference eliminating Security+ 2.0® radio.
Heavy-Duty Cast Aluminum Housing DC Motor powerful enough to perform in the most demanding applications.
Soft start/stop operation extends operator and hardware life for heavy-duty gate use.
Gate Size rated for gates up to 16 ft. in length or weighing up to 850 lbs.
Includes: Single arm control box solar harness kit solar panel kit 12V 20W LMRRU photoeye and battery 12V 33 Ah.
Item codes: XLSOLARCONTUL SP20W12V LMRRUL LA412DC K94-37236 A12330SGLPK

.......more details

TRACK-SET-2STD-7

2" Tracks Set 7'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

MDT-1B

Linear 1-Channel Visor Transmitter MegaCode Block Coded 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Unique ”Extra” top button
High visibility operate LED
Visor clip included
Sold in lots of 10

.......more details

Programming instructions

MK-00703

Micanan Harness 1-Phase 5-Relay Board

MK-00010

Micanan 3-Pole Power Terminal Strip

ME110-2W-BLK-L

Miller Edge 2-Wire Black Left Hand Outlet 7/8" wide x 3/4" high Sold by the Foot

Electromechanical pressure sensitive edge for counter shutters rolling doors and barrier arm applications.
Touch sensitive signaling that allows for immediate stopping and reversing of motion.
Temperature range -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration.

.......more details

Worksheet

PRO-J-10011-U-LH

Micanan 1HP 115V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Installation Manual (EN) Specification Sheet

.421-334-R

Cut-to-Length Torsion Spring .421 x 3-3/4" Right Hand Wound Gold

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-375-INSTALLED

PRO-J-7553-U-LH

Micanan 3/4HP 575V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

.375-334-R

Cut-to-Length Torsion Spring .375 x3-3/4" Right Hand Wound Yellow/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

ALUM-532

Aluminum 24" x 100' Spool Almond / Amande # 532

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 532
Reverse side is #431 Bright White

Colour chart

LMWETXU

LiftMaster Wireless Edge Transmitter Monitored

Connects to wireless edge receiver using low-energy Bluetooth transmission
Sensing distance up to 130 ft
Transmitter accepts up to 2 wired resistive edges
Battery life 2 years
NEMA 4X rated
Compatible with LMWEKITU Wireless Edge Kit and L50 and S50 Monitored Resistive Edges

.......more details

Installation manual Manuel d'installation Product Guide Guide de produit

PRO-J-5053-U-RH

Micanan 1/2HP 575V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-J-5081-U-RH

Micanan 1/2HP 208V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-GT-10053-U

Micanan 1HP 575V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-5083-U

Micanan 1/2HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

.406-6-L

Cut-to-Length Torsion Spring .406 x 6" Left Hand Wound Blue/Yellow

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

PRO-APTB-5043-U

Micanan 1/2HP 460V 3P Apartment Trolley Operator With Brake N1 Eyes Monitored ECB

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-APT-5021-U

Micanan 1/2HP 230V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-TB-10011-U

Micanan 1 HP 115V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 & 1 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-T-7543-U

Micanan 3/4HP 460V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-5053-U

Micanan 1/2HP 575V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board

60-7248-SC6

Wheel Chock Safety Pkg incl'd: alum. chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) SC-6 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Excellent Surface Grip on Tire and Ground
Lightweight Aluminum
Size: 6" wide x 6-1/2" long x 6" high

PBC-3

Push Button Control Station 3-Btn O/C/S Stainless Steel Face Plate Nema 1 Flush Mount

Single gang box
Face plate: 4-1/4" H x 2-3/4" W Back Box: 4" H x 2" W

MK-00071

Micanan Transformer 575V-115V-50VA (MK00161)

41C76

LiftMaster Belt Sprocket Cover Kit

Also known as: 041C0076 41C53 41D469 99324608

212SE

Nortek Linear Weatherproof Keypad

120 users
Indoor/outdoor self contained brushed metal housing
Surface mount vandal resistant design
One piece housing suitable for wall post or gooseneck mounting
Durable metal Braille alpha-numeric keys
4 on board programmable timed relays

.......more details

MD00381

Micanan #410 Roller Chain 51 Pitch c/w Connecting Link

MM00284

Micanan Disconnect Arm PRO-HHD MSI0277

SPUR_GEAR

Spur Gear For Holdown Assembly

31D380

LiftMaster Sprocket Cover

Sprocket Cover Replacement Kit for use with various LiftMaster® and Chamberlain® Chain Drive Garage Door Openers

.205-3.5-10-LHW

Mini Storage Spring .205 x 3.5" x 10" long Left Hand

SRB-5

Standard Riser Bracket 5" Above Dock

Standard 5" Riser Bracket for 6" Above Dock Door or Less
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

E/BLOP/150

Automatic Systems Safety Edge for BL229 14'-9" (EABLOP/150)

SPR50B54X11238

Sprocket 50B54 for a 1-1/2" Shaft 3/8" keyway

ME00071

Micanan Idler Shaft PRO-APTC

STRUT-2-1/4-14'-NH

Door Strut 2-1/4" Non Hemmed 14 ft Long ***No Longer Available

Reinforcement bar 2-1/4"
20G

LB1010-36

Laminated Bumper Standard Black 10" x 36" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB1010-24

Laminated Bumper Standard Black 10" x 24" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB410-24SF

Steel Faced Laminated Bumper Black 10" x 24" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB410-18SF

Steel Faced Laminated Bumper Black 10" x 18" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB412-18SF

Steel Faced Laminated Bumper Black 12" x 18" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB410-36SF

Steel Faced Laminated Bumper Black 10" x 36" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB410-14SF

Steel Faced Laminated Bumper Black 10" x 14" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TVB624-11SF

Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 24" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

8010-7FT

LiftMaster DC Chain / Cable Drive Garage Door Opener with 7ft SSR Rail (1607LM) ***No Longer Available

Customized DC Motor with soft start/stop action.
Chain/cable square steel rail (SSR) system for efficient operation and standard performance.
Security+2.0 increases remote control range and reduces interference for consistent operation.
PosiLock® electronically protects against forced openings.
The Protector System® invisible light beam auto-reverses the door if there is an obstruction.
Comes with: Door Control Button (883LM) 1-Button Remote Control (891LM)

.......more details