Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
9271431440

Spring Wire .289 x 2.625 x 144" Coated RAW LH

  • .289 x 2-5/8" x 12'
ST14COP

Copper Stop 1/4" 100 Stops per Pkg *price on request

  • Stops ONLY
  • Sleeves sold separately part # SL14COP
503267

PEEK Vehicle Loop Detector 24V with Harness Nema 1 ** Discontinued

  • Enclosed requires separate 24VAC power.
  • Wiring harness with plug for detector included.
  • OPEN only (all LiftMaster operators) or SAFETY/HOLD OPEN only (operators with type B2 T TS or T1 control wiring) when vehicle passes over loop wire
  • Requires a loop of wire embedded in the ground to connect to the detector.
  • Requires 2-wire output connection to door operator and 24VAC power
  • Also known as: G50625S24
    • .......more details
MW-00050

Micanan In-Line Torque Clutch Assembly (MP00232)

  • Friction clutch mounted in between motor and reducer flange
  • Comes with cover and studs
  • New part number MP00232
PRO-TB-5011-E

Micanan 1/2HP 115V 1P Trolley Operator with Brake NM ECB No Eyes

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Non-Monitored board NO photocells
  • On-Board receiver holds up to 20 transmitters
PRO-LT-5011-U

Micanan 1/2HP 115V 1P Commercial Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
  • Trolley track for door up to 12ft standard upcharge for 14' & 16'
  • Door speed 9 inches per second
  • UL325
  • On-Board receiver holds up to 20 transmitters
RESET010

Manaras Resettable Overload Fuse 13A 1 Phase

K74-18379

LiftMaster Hall Effect Sensor for SL575 SL585

  • Hall effect assembly for SL540/570/580/575/585 operators with GL Board
  • Includes: screws flat washers lock washers and replacement instructions
  • Same as: G74G0487
  • This part has a short lead-in wire and will not work with SL590 or SL595
.312-6-R

Cut-to-Length Torsion Spring .312 x 6" Right Hand Wound Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
K32-10540

LiftMaster Gear Reducer 20:1 SL595

  • Same as 32-10540 32-55011 32-5501-1 G3255011
28-30081

Truck Door 1" Horizontal Track 6" Radius for T-Style Std Doors 120" Roadside (LH)

  • Galvanized steel 14 gauge construction
  • For use with 1" diameter rollers
  • 6" radius for smooth door operation
  • Track coupler used for proper alignment at track joints
28-00114

Truck Door 1" Std Vert. Track and Angle Assbly J Style Roadside (LH) 120" Todco Style

  • For Todco style doors
  • Galvanized steel 14-gauge construction
  • Includes J-style channel mounting angle with track and operator bracket
  • Fits door sizes 101 - 114" high
  • Cross ref: T #49014-2 T #41034-2 & W #4045
SD751L5-RH

LiftMaster Heavy-Duty Slide Door Operator 3/4HP 115V Right Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
Installation manualManuel d'installationSell sheetBrochure
28018A-KIT

Genie Inner Slide Bullet and Retainer Kit Belt Drive

  • Kit includes part # 28018A and # 28019A
  • Fits Many Genie and Overhead Door Belt Drive Openers with C Rail
  • Includes 1 Belt Bullet and 2 Retainers
180215

Decorative Hinge Apen-V3 Style 16" Stamped Steel Sold per piece

  • As seen on carriage house doors
180210

Decorative Pull Handle Aspen-V3 Style 10-1/4" Stamped Steel Sold per piece

  • As seem on carriage house doors
FRONTIDLER010

Manaras Front Idler Assembly #41

MWC-32

Wheel Chock MWC-32 Rubber with Eye Hook

  • Good stability over others in this class
  • Long Lasting 80 Durometer rubber
  • Size: 6-1/2" wide x 9-1/2" long x 8-1/2" high
HAE00061

Linear LDCO Control Board BBU Compatible *** USE HAE00077 instead

  • DC motors
MB-03204

Micanan Electric Motor Only 1 HP 575V 3PH C-Flange TEFC 56C

  • Fits GT GH GHC & GSD
CHAIN031

Manaras Jackshaft Drive Chain #50 5' with Link

ULT-MVP-2-D-TEK

EMX Industries Multi-Voltage Loop Detector 2-Channel (ULT-MVP-2U)

  • Combines small size with 9VDC to 240VAC input range.
  • Size: 73 x 38 x 78mm
  • ULTRAMETER™ display indicates the appropriate sensitivity setting the vehicle positioned on the loop
  • Ten (10) sensitivity adjustments
  • Four (4) frequency settings
  • Automatic sensitivity boost (ASB) delay fail-safe/fail-secure and infinite or normal (5 min.) presence
    • .......more details
JDMG-LG-BBU

GDI Battery Backup Option G3243

  • Battery Backup option for JDMG-LG operator
.243-258-R

Cut-to-Length Torsion Spring .243 x 2-5/8" Right Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
STRUT-2-1/4-16'-NH

Door Strut 2-1/4" Non Hemmed 16ft Long

  • Reinforcement bar 2-1/4"
ALUM-431

Aluminum 24" x 100' Spool Bright White / Blanc Pur # 431

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Aluminum on the reverse side
  • Gentek # 431
Colour chart
MG020-B-2E-04

Miller Edge Sensing Edge Black 2-Wire End Outlet 4ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
200BL-10

2" Light Brush Insert 10ft Long

  • Polypropylene bristles
  • Same as MS1703-120
FCC316-500

Cable 3/16" 6x19 Galvanized Fiber Core 500ft

  • For high-speed doors
  • 3/16” 6x19 galvanized
  • Polypropylene core to help prevent wear and increase flexibility
  • High life cycle wire rope for rapid doors
  • Lubricated during production for extended life
  • 500 feet per roll
    • .......more details
R5221

Sheave Strap 4"

  • Sheave strap also known as fork only
ALUM-508

Aluminum 24" x 100' Spool Sandalwood / Sable # 508

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 508
  • Reverse side is #431 Bright White
Colour chart
BL-09

Barlock Kit Complete for 9ft Wide Door Kit includes hardware bag

  • Kit includes hardware bag and bars (55-1/2")
Assembly Manual
MIRM-T2-50

Miller Edge Patriot 2 Photo Eye Monitored 50ft Non-Contact ** Discontinued

  • Attaches directly to a Sectional door.
  • The photo eyes travel below the door during the closing cycle.
  • Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
  • The Patriot2 non-contact system consists of thru beam photo optics.
  • Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
  • The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.
    • .......more details
K75-34824

LiftMaster Chain Guard Kit for SL575GL SL585GL SL585U slide gate operators

  • Complete with: Chain Guard Chain Guides and Retainers.
  • Works with SL575GL SL858GL and SL585U
226-9313

Lithium AA 3.6V Battery

  • Used in various types of photo eyes
PG-K-R50

Prime Guard Monitored Thru-Beam Photoeye Kit 50 ft Range Relay Output

  • Prime Guard's rugged housing is suitable for both indoor and outdoor installations.
  • Dimensions: 5.1" H x 2.8" L x 1.8" W
  • Weight (Em): 12.2 oz. (Em)
  • Weight (Rx): 11.2 oz. (Rx)
  • Aluminum enclosure
  • Mounting options: Wall floor post
    • .......more details
Sell sheet
39165R

Genie Series II Wall Console

  • Three-function wall console with backlit panel that is easy to locate in the dark.
  • Sure-Lock mode allows you to lock-out the keypad and remotes for extra security at night or while on vacation
  • When Sure-Lock™ is ON and the garage door is in the fully closed position the powerhead cannot be activated by the wall console or a remote.
  • Same as GBWCSL2-BX
MK00552

Micanan Capacitor for 233-284 MFD with Resistor ** Replaced by MK00542

K002B0821-1

LiftMaster Transformer for EL1SS and EL25

  • 120 volt input power plugs into a standard outlet
  • 16VDC output 2.5 amps
ALUM-523

Aluminum 24" x 100' Spool Slate / Charbon # 523

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 523
  • Reverse side is #431 Bright White
Colour chart
1104-16'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 16' Long - Light Bronze (F) **NLA

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
K12-8033

LiftMaster Female Rod End RH

  • Lower rod end for BG770 BG790
  • same as part # 12-8033
41D7570

LiftMaster Light Lens (41D7572)

  • Also known as 041D7572 41D7571 41D7570 41D7572 041D7571 041D7570 041-0144
25-42-280

Extension Spring 7' Door - 280 lbs Gold w/ clip

  • Double - Loop
  • 25" long 42" stretch 280 lb load
  • Sold individually
  • Rated for 10000 cycles
Q084

LiftMaster Cam Lock and Keys HCT K80-50142

  • Same as K80-50142
  • Fits model HCT
  • Comes with 2 keys
GL-12-LED

Guide Lights for Loading Docks Amber LED 12-24VAC/DC 13.5" long Sold as a Pair *Discontinued*

  • LED lights offer long-lasting reliable high-visibility in all weather conditions including direct sunlight with low power consumption.
  • Robust housing resists impact and corrosion.
  • Slim discrete design ensures little risk of damage due to accidental impact.
  • Wide input voltage range of 12-24Vac/dc (control box available for alternate voltages).
  • Boards coated in water-resistant polymer for optimal protection from water and humidity.
  • 12 LEDs per guide light
    • .......more details
201-300-401-00

Equinoxe Long Range Transmitter O/C/S for 8-Doors 433 MHz Pre-2016

  • Open/Close/Stop remote for 8 doors
  • Range of approx. 1000ft
  • A heavy-duty remote for Industrial applications
  • Old generation- prior to 2016
Programming InstructionsInstructions de programmation
15-50B12LGH

Sprocket 12 Teeth 1" Bore 1/4" Keyway

  • Same as 50B12x1
3-32-1

Low Headroom Top Bracket 2" Residential 1 pc

  • For residential door with 2" track
MEA2

Nice Key Unlock System for Older Metro Gate Op.

  • For underground gate operator
  • (1) MEA2 KEY UNLOCK SYSTEM (2) KEYS- METROPLEX & BIG METRO
  • Does not work on the newer systems. For newer Big Metro use BMA3 lever type release
226-9312

Lithium AA 1.5V Battery

  • Used in IG2 photo eyes
2B737

LiftMaster Output Board EL25

  • Output board for models EL25 and EL2000 (041B0737)
K75-10259

LiftMaster Track Spacer Assembly

  • Standard duty trolley operator part
2704.192_340

Whiting Roadside Torsion Spring 2-3/16" ID 34" Long

  • Torsion spring wire only
  • .192 wire size
3950

LiftMaster Jackshaft Door Operator for Comm. Rolling Sheet Doors

  • Designed for commercial rolling sheet door applications only - ideal for self-storage facilities.
  • It may be used on commercial rolling sheet doors with live or dead shaft measuring up to 12 ft. high and up to 14 ft. wide but not exceeding 650 lbs.
  • Maximum recommended duty cycle: 10 cycles per hour.
  • UL-Listed and UL-Labeled to insure compliance to local codes and approval at final inspection
  • Heavy-duty 24V DC motor provides ultra-quiet operation
  • Push button limit setting
    • .......more details
Installation manualSell sheet
KH-3.5

Magnetic Key Hole 3-1/2" Tall

  • Decorative key hole only
  • Black flexible magnetic material with deep embossed design
C16-32FHD

Bearing 1" x 2" Press Fit Heavy-Duty

  • Flanged ball solid steel bearing
  • Rating: 1 000 000 revolutions
  • Axial load: 150lb max
  • Radial load: 900lb max
E5761-A27

Automatic Systems Arm Shaft Assembly for BL27

  • French description: Ensemble Axe de Lisse
  • For model BL27 gate operator
K20-1050B-2TLP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph L3 L4 TEFC

ME123-M-BLK-RH

Miller Edge Black RH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
1003-4-DF-200FT

Bottom U-Rubber 4" Dual Fin Black 200' Long

  • 200ft spool of vinyl insert.
  • Dual fin
02-108

Push Button Station 3-btn O/C/S Flush Mount Stainless Steel Faceplate

  • Nema 1
  • Standard 2X4 electrical junction box with stainless steel faceplate
  • OPEN/CLOSE/STOP allows complete control of the door
Q400E-HCT

LiftMaster Control Board HCT

  • Replaced Q400D-HCT
MHS5011U-LH

LiftMaster 1/2 HP 120 Volt Medium Duty Slow-Speed Jackshaft Operator

  • Designed for use on rolling sheet doors.
  • It features an adjustable friction clutch high-starting torque motor with overload protection emergency chain hoist with electric interlock and emergency disconnect chain.
  • Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism
  • Floor level disconnect
  • 24V NEC Class 2
  • Wiring is factory present to C2 mode
    • .......more details
Installation manualSell sheet
MHS5011U-RH

LiftMaster 1/2 HP 120 Volt Medium Duty Slow-Speed Jackshaft Operator

  • Designed for use on rolling sheet doors.
  • It features an adjustable friction clutch high-starting torque motor with overload protection emergency chain hoist with electric interlock and emergency disconnect chain.
  • Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism
  • Floor level disconnect
  • 24V NEC Class 2
  • Wiring is factory present to C2 mode
    • .......more details
Installation manualSell sheet
1224-2-WHITE

Elton Commercial Window for Flush Doors 2" thick 1224 White Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 25-1/8" x 13-1/8"
  • Cut-out size: 24-1/16" x 12"
  • Vision area: 21-11/16" x 9-5/8"
  • Different glass options and frame colours are available upon request
    • .......more details
C-600-114-INSTL

Cones 6" 1-1/4" bore Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF600-114
745266

Strobe Low Profile Amber LED Warning Light 12-24VDC

  • Fully encapsulated electronic circuitry ensures a lifetime of trouble-free operation.
  • Installer can select the flash pattern of each high intensity strobe by wiring the unit according to the flash rate preferred.
  • 4 7/8" X 5 7/8" Rubber base Surface mount 12-24VDC
MU22-2WIRE-E-Y

Miller Edge MU22 2-Wire End Yellow - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
19-48047MN

LiftMaster Roller Chain #48 x 47 Nickel Plated

  • #48 x 47 pitch with master link
65-52091-16

LiftMaster Manual Hoist Mod. M8 #41 Chain for 16ft High Door

  • For 3/4 Hp & 1 Hp Trolley operators
  • Includes floor level brake release cable 1" x 12' round bar.
PRO-APTB-5011-R

Micanan 1/2HP 115V 1P Apartment Trolley Operator With Brake Contactor

  • Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
  • Low clearance design for apartment applications (9.5")
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema-1
  • Solenoid brake installed
  • Door speed 12" per second
    • .......more details
Installation manualSpecification sheet
MGS20-B-2U-06

Miller Edge Sensing Edge Square Black 2-Wire Universal Outlet 6ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
S142BRNN924

Carlo Gavazzi Amplifier 24V

  • Processor controlled amplifier for one set of photoelectric sensors type MOFTR.
  • 11-pin circular plug for easy connection.
  • 8A SPDT relay output NPN/ PNP transistor output or alarm output.
  • Diagnostics for sensor test during operation.
  • Alignment help via LED or alternation of alarm output.
  • Level indication for dirt accumulation.
    • .......more details
OSH-6213-ECB-LH

Manaras Opera-SH 3/4 HP 240V 1Ph with Electronic Circuit Board Left Hand *** To Extent of Inventory

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation manualSell sheet
T-931-H

FL-Heddolf 1-btn Transmitter P220-1K-311 MHz **this model is discontinued

  • Open/Close remote for 1 door
  • Dip switch led 9V battery and metal clip
  • Compatible with Allstar 1 button T-931 and T-931-M
  • New style transmitter case
REDUCER025

Manaras Reducer 45:1

MUSHROOM-PB

Lockable Mushroom Push Button with 1 NC Contact

  • N/C Contact "Stop"
  • Push to Stop Turn to Unlock
  • NEMA 4 Enclosure
50ACTWF

LiftMaster Receiver Logic Board AC WiFi*** Discontinued and replaced by the 050ACTBMC

  • This is a 315MHz Security+ 2.0® Receiver Logic Board featuring Wi-Fi with MyQ® technology.
  • For use with various LiftMaster® and Chamberlain® AC Chain or Belt Drive Garage Door Openers; manufactured after 2011.
  • The unit will feature a yellow learn button
  • Also known as: 1D8088-1 045ACTWF 1D8808-3 041D8088 50ACCL5
  • Same as 050ACTWF
  • 1 Year Warranty
    • .......more details
MX00140-NEW

Micanan Brake Assembly for PRO-TB/APTB NO Solenoid - New Model (SBR-N1-00-TTBPAPT)

36764A

Genie Chain and Belt Pulley (#39591A)

  • Works on Genie IntelliG 1000 & 1200 Garage Door Openers
  • Both for Chain and Belt Openers
  • Front Idler Pulley for Genie 4024
  • New part number #39591A
8087.225.310

Whiting .225 x 2-5/8 IN x 31" Curbside with Cones

  • An original Whiting assembly
ST-ACTIVATOR

Soft Touch Activator

  • Same as ST-PRIMER
  • Used to make the glue dry faster
  • Approx 10 ounces 300ML spray can
CP-BRG-58

Lynx Bearing 5/8"

  • 6 in total on a MCJH
109441.0002

Overhead Complete Limit Switch Assembly JST

  • Replaces part number 109441.0001
  • Replacement has 3 limit switches
.393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Orange

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
ME111-2L-T2

Miller Edge Black Left Hand Outlet Monitored 7/8" wide x 1-1/2" high Sold by the Foot

  • Slide in style edge for barrier gate and counter shutter application.
  • Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •10K ohm resistor •Temperature Range: -30F to 155F
  • Lead wire: AWM 22 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
  • Vertical or horizontal mount
  • ANSI/UL325 recognized component
    • .......more details
Installation ManualWorksheetSell Sheet
29202

Doorlec Transformer 550Vpr 120V sec. 35VA

20456R

Genie Pulley Support Kit *** No Longer Available

  • Front metal clip with pulley
  • Front idler for use with Genie and Overhead Door T-rail systems
DF104.2

Whiting Dry Freight Door 3/4" with Track Balancer and Standard Hardware

  • Standard features include: 2-cable balancer with independent springs
  • Balancer springs treated with rust preventative
  • All door hardware is E-coated
  • Spring loaded lock catch
  • Heavy-duty 2" 13-gauge track
  • Stainless steel aircraft cables
    • .......more details
10-3209_GATE_BRKT

LiftMaster Gate Bracket

  • Fits SL580GL SL595GL and new IHSL24UL INSL24UL models
26966D

Genie Chain Pulley

  • Front idler pulley for full chain models ie..PMX500
  • Fits a T-rail
  • Diameter: 2-3/8"
  • 7/16” bore
  • For use with t-style rails
79-16088

LiftMaster Circuit Board Assembly for LGO **discontinued**

  • Same as K79-16088
MODKIT013A

Manaras Timer to Close Kit 0s-100h Med-Duty

  • Timer To Close Kit for Manaras Commercial Door Operators with reversing contactor style control box.
  • Includes Timer base and all required wiring
  • Detailed installation instructions are included
Installation Manual
EXA-2000

Linear Directional Antenna (AAE00331)

  • Compatible with all Linear receivers with Type F antenna connector
  • Receives signals in 288 to 320 MHz range
  • Directional remote antenna designed to enhance the radio range of Linear receivers
  • Includes 10 feet of coax
  • Clamp for mounting
  • Dimensions: 21” W x 5” H x 1.5” D
    • .......more details
CP-LX100

Lynx Control Board with Cover for UL325 models

  • For all voltages
Programming instructions
MO00003

Micanan Compression Spring for PRO-H/HB

  • 0.80 ID x 0.092G x 1.80 Long
11-10705

LiftMaster Output Shaft MH

PRO-APT-5011-U

Micanan 1/2HP 115V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
4X16SC50

Devanco Loop 4' x 16' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles