Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MALEDCW

LiftMaster Counterweight for 17ft LED Arm

For use with MALED17 17 ft. LED Arm for MA/MAT

15-19478

LiftMaster Sprocket Assembly

For model H (2005-present)
48B32T with hub

RDGRNCARD

LiftMaster Warning Device Option Board with Red/Green Light Box

The Red/Green warning light card flashes a warning light for 10 seconds prior to the Timer to Close activating the door to close.
Advanced warning of the door closing helps prevent traffic collisions with the door
Controls both 24V & 110V traffic lights

Installation Manual

RESET012

Manaras Resettable Overload Fuse 15A 1 Phase

7001-WG-10-MO

Residential Wood Grain Side & Top W/S Medium Oak 10' Long - Painted Screws to Match

Medium Oak retainer with Medium Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

2'6X6SC50

Devanco Loop 2'6" x 6' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

MA028

LiftMaster Padded Barrier Arm Yellow 14ft

For use on Mega-Arm gate operator
Requires adapter collars model MA031 - sold separately

Additional arm accessories

MK-00061

Micanan Time Delay on Reverse 1.5 sec. 24/110V

In closing cycle door will stop for 1.5 seconds and reverse to fully open

CB5320500-KOR

Cable 5/32" 7x19 500' Galvanized Supreme

Galvanized cable 5/32" 7x19 500ft spool.
Cable break strength: 2800 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

CB18B0500-KOR

Cable 1/8" 7x19 500' Galvanized Supreme

Galvanized Cable 1/8" 7x19 500ft spool.
Cable break strength: 2000 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

25-2006

LiftMaster 6 Amp Overload Fuse

For models: SL585-50-21 SL858-50-81 SL595-50-21 SL595-50-81 SL575-50-21 SL575-50-81

EL1-SS

LiftMaster Telephone Entry System Stainless ** NLA

A Telephone Intercom and Access Control System which provides wired telephone intercom communication and secure access control at the gate or door.
Connects directly to the existing residential home phone line so no additional monthly expenses are incurred.
Stainless steel faceplate with black powder coated housing is attractive and tough.
200 (4-digit) unique programmable entry codes provide convenient assigned access.
Optional power supply transformer not included: K002B0821-1

Programming Instructions Instructions de programmation Sell Sheet

17-10336

LiftMaster Pulley 7.000"OD 3/4" Bore 4L-Belt

26-40045

Truck Door Offset Bottom Seal 98" Long for Whiting Dryfreight Doors

Co-extruded using rigid PVC backing with flexible PVC seal.
To be used with the offset U-channel retainer only (26-40037 or 26-40039)

DXT-42

Linear 2-Btn 3-Channel Key Ring Transmitter *** Discontinued

Battery powered portable miniature transmitter designed for use with Linear’s DX Format receivers.
Each transmitter can be used in a limitless number of wireless remote control applications.
Pressing a transmitter button sends a digitally coded wireless signal to its companion receiver. The transmitter buttons have a positive click feel.
The digital DX code format features over a million possible codes.
The DX transmitters are precoded at the factory to unique codes so no field coding is required. Transmitters can send a signal for up to 10 seconds with each button activation.
Each button sends a unique code. Pressing both buttons together sends code three. Press button(s) for a minimum of two seconds to insure receiver activation.

.......more details

Installation Manual

MA117

LiftMaster Counterweight for Arms 15ft & Up

IG2-K10-30

Invisi-Guard-2 Photo Eye Kit 30ft Battery Powered *** Discontinued

The Invisi-Guard-2 thru beam photo optic system sends an invisible beam of light from a transmitting unit to a receiving unit.
The light beam is intended to function as a protective line guarding a potentially hazardous zone.
When the light beam is interrupted by an obstruction a signal is sent to the motor controls to stop or reverse motion
Universal Design Works with Pre and Post 2010 Operators
Spans Distances up to 30 feet (model dependent)
Time Saving Installation

.......more details

Installation Manual Sell Sheet

OSH-6112-ECB-LH

Manaras Opera-SH 1/2HP 120V 1Ph with Electronic Circuit Board Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual Sell Sheet

K72-33872-1

LiftMaster Limit Switch Shaft Kit

For models MT BMT MJ MH and MHS logic control
Kit includes: limit shaft limit nuts limit bearings limit sprocket washers compression ring roll pin and e-ring

WKP5LM3

LiftMaster Wireless Keypad 5-Code ** Replaced by KPW5

Wireless access control keypad
Same features as WKP250LM3
5 code capacity - 4-digit codes
2-way design with confirmation beep
900MHz

Programming Instructions

PRO-HBH-7511U-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

14JW

Rolling Steel 3" Flat Cast Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

14FW

Rolling Steel 3" Filler Endlock for Continuous

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

SLT4-18P

Rolling Steel 3" Crowned Slat 18-ga Primed

PROBE-50

EMX CARSENSE-101 Direct Burial Probe with 50' Lead Wire

Wand only
Requires CS101 (Carsense-101)

CH753L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Right Hand

Industrial Duty Hoist Operator with Damp Environment modification
Brake not included
Comes with CPS-UN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

IRB-BR

EMX Industries Brackets for Photoeyes Sold as a Pair *** To Extent of Inventory

Brackets are predrilled
Used for PC-3 P41 P44 P45 and IRB-4X photoeyes
Made of metal
Sold as a pair
9" x 3" L-Shaped

BK314

Jamb bracket J-14 #14 12 gauge

Sold by the piece
Height 5.50" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

BK308

Jamb bracket J-08 #8 12 gauge

Sold by the piece
Height 4.00" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

BK306

Jamb bracket J-06 #6 12 gauge

Sold by the piece
Height 3.50" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

MODKIT074

Manaras Hand Crank Field Modification Kit

For in-field upgrade on OGH and MGH operators

Installation Manual

201-300-401-01

Equinoxe Long Range Transmitter O/C/S for 8-Doors 433 MHz New Generation

Open/Close/Stop remote for 8 doors
Range of approx. 1000ft
A heavy-duty remote for Industrial applications
Year 2016 +

Programming Instructions Instructions de programmation

MG020-Y-2E-04

Miller Edge Sensing Edge Yellow 2-Wire End Outlet 4ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

OTBH-6114-1-ECB

Manaras Trolley Operator 1 HP 120V 1 Ph with Electronic Circuit Board

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

Installation Manual Sell Sheet

T103L5

LiftMaster 1 HP 208/230/460V 3P Commercial Trolley Operator Logic 5

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

PPK3

LiftMaster Passport 3-Button Mini Remote Control with Sec+ 2.0 Technology ** To extent of Inventory

Programming Instructions Instructions de programmation Sell Sheet

VBELT_4L355

Doorlec VBelt 4L 35.5" *** NLA

Same as part number 19045

Z9200

Cable Snubbers Sold as a Pair

Prevents slack from forming in cables
Sold in pairs

Installation Instructions

20386R

Genie Sequencer Board AC Screw Drive

For Genie Screw Drive garage door opener models: PRO95 CM8600 CM7600 Series II ISL950A IS550
Replaces part number 31184R

773

Fasteners Lag Screw Hex Washer High Profile 5/16" x 2-1/2" 1000/Box *** Temp. NLA

7/16" Head
Hex washer high profile head

18007

Doorlec Reducer BHC-63 5/8' or 7/8" Input

Gearbox for GH operator

19-5114

LiftMaster Trolley Chain Pack #41 for 14ft Door

For 3/4 & 1 HP trolley operators

MTAW22B-R

Miller Edge MT22 Air Wave Black Right Hand Sold by the Foot

Installation Manual Sell Sheet

LEVER065

Manaras Brake Lever

97798

Marantec 2 Piece Logic Board with Terminal Strip for EOS Models

For use on Easy Operating System (EOS) units 4500E 4700E and M50.
Includes the terminal strip for direct replacement of boards that had a power surge or burned out.
The marantec old model number was 78914 it is now 97798.

Programming Instructions

BL229-ARM-12-R

Automatic Systems Aluminum Barrier Gate Arm 12 ft Round

PRO-HB-7511R-LH

Micanan 3/4HP 115V 1P Hoist Operator with Brake and Mechanical Contactor Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Includes solenoid brake
On-Board receiver holds up to 20 transmitters

Installation manual Specification sheet

771

Fasteners Lag Screw Hex Washer High Profile 5/16" x 1-3/4" 1000/Box *** Discontinued

7/16" head

784

Fasteners Serrated Flange Nut 1/4-20 1000/Box

Serrated flange face to provide locking

774

Fasteners Hex Head Bolt 5/16-18 x 3/4" 1000/Box

5/16" bolt has 1/2" head
Max torque = 12
Full thread
Grade 2/Grade 5 depending on availability

AW14-RF-K10

Miller Edge Wireless Air Wave Switch Transmitter/Receiver Kit

AW14-RF is the AW14 air wave switch with a transmitter embedded within the switch enclosure and the receiver wires into the operator.
There is no need to hardwire coil cords or retracting reels which saves installation time and improves visual aesthetics.
The AW-14-RF-K10 switch kit includes a MRF-01 receiver which is wired to the motor controls.
Battery is included # CR2032

Installation Manual Sell Sheet

K72-12506

LiftMaster Clutch Shaft Kit (1/3 & 1/2HP)

For 1/3 and 1/2 HP models - L5

OSH-6113-CONT

Manaras Opera-SH 3/4HP 120V 1Ph with Contactor

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

H501L5-LH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 115/230 VAC Logic 5 Left Hand *** No Longer Available

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

K001D8072-1

LiftMaster Single Phase Relay/Power Board (K001D8396-1)

For Logic 5 commercial operators
Same as K001D8396-1
014D1276E

5463.96

Whiting Vinyl Top Seal 96" 1-1/2" wide

Original TempGuard top seal used on Supreme body trucks from 2009
One piece rigid plastic cap retainer with a flexible vinyl seal.

AIRSWITCH008

Manaras Metal Case for AIRSWITCH007

1104-12FT-GREY

Residential Side & Top PVC Weather-Strip with cap 12' Long - Grey (G)

Grey rigid vinyl retainer with grey flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

71-65WTC

LiftMaster Weatherproof Case

Optional weatherproof case suited for 412LMC 422LMC and 423LMC
Measurements of the interior: W=5.75" L=7" D=3"
Measurements of the exterior: W=7" L=10" H=3.5"

28-30015

Truck Door 1" Vertical Track with Holes 93.5" for Todco Roll-Up Doors

Galvanized steel 14 gauge construction
Holes drilled to allow for faster plug weld installation to frame
For use with 1" rollers

MDT-4A

Linear 5-Channel Visor Transmitter MegaCode 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Factory programmed MegaCode format supports over 1000000 codes
Unique ”Extra” top button
High visibility operate LED
Visor clip included

.......more details

Programming Instructions

MB-02202

Micanan Electric Motor Only 3/4HP 575V 3PH

Base mount motor fits: T TB APT J EJ H EHJ HHD SD GO MSW

MX00149

Micanan Complete Clutch Shaft Assembly for PRO-H

655302

LiftMaster Pneumatic 22' Sensing Edge with 2-Wire Take-Up Reel

BEARING005

Manaras Flange Bearing ID 5/8"

Flange bearing for 5/8" shaft

.295-2-L

Cut-to-Length Torsion Spring .295 x 2" Left Hand Wound Blue

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

ME123-C

Miller Edge U-Shaped PVC Mounting Channel Sold by the Foot

2" Wide 1-1/4" High

MV00077

Interlock Switch for Sectional Doors

Mounts on the door track to prevent the use of the operator when the door is locked

14FT-I-BEAM

LiftMaster 14' I-Beam Rail 3714RV / CD1014

I-Beam Chain Drive Rail for model 3595

ME112-L

Miller Edge Black 2W Non Monitored LH Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors and gates.
Retrofits easily to 1" to 1-1/4" sectional doors
Touch sensitive signaling allows for immediate stopping/reversing of motion
For sectional doors: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order
Lead wire: 22 gauge univversal

.......more details

Installation Manual Worksheet Sell Sheet

ME112-R

Miller Edge Black 2W Non Monitored RH Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors and gates.
Retrofits easily to 1" to 1-1/4" sectional doors
Touch sensitive signaling allows for immediate stopping/reversing of motion
For sectional doors: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order
Lead wire: 22 gauge univversal

.......more details

Installation Manual Worksheet Sell Sheet

.375_6"-LH

Torsion Spring .375 x 6" x 12ft LH Yellow/Green

Wire size: .375
Inside diameter: 6"
Length: 12 ft

635LMC

LiftMaster Universal Plug-in Receiver 390 MHz ** To Extent of Inventory

Compatible with any garage door opener with a simple 2-wire dry contact
Includes 2-conductor bell wire
Able to accept 8 Security+ transmitters & 1 digital keypad or 1 dip-switch transmitter and 12 billion code transmitters

Programming instructions Instructions de programmation

823LM

LiftMaster Remote Light Switch Sec+ 2.0 ** To Extent of Inventory

Controls lights remotely
Turn on lights in your garage yard or home with your garage door opener remote control
Use with LiftMaster Internet Gateway to control lights from smartphone or computer
Compatible only with Security+2.0 garage door openers and accessories enabled by MyQ technology

Installation Manual Manuel d'Installation

41C4470

LiftMaster Gear & Sprocket Assembly for ATS211

Complete Gear and sprocket assembly for ATS211 ATS211R built from 1993 - 2003

Installation Manual Manuel d'Installation

4A1344

LiftMaster Light Socket Plastic (41C279)

T-733

FL-Allstar 3-btn 3-Door O/C/S Transmitter 107477-311 MHz

This transmitter can control (open-close-stop) up to three doors.
It has a eight switches encoder with three positions: + 0 and - .
Manufacturer's model number: 733T (190-107477)
Dimensions: 6 1/4" x 3 3/8" x 1 3/8".

Programming Instructions

T-833-C

FL-Allstar 3-btn 9-Door Transmitter 109023-311 MHz***NLA

This nine channel transmitter controls up to nine doors (open-close) or three doors (open-close-stop).
It has a height switches encoder with three positions: + 0 and - .
Manufacturer's model number: 8833TC (190-109023)
Dimensions: 4 5/8" x 2 1/4" x 7/8"

Programming Instructions

.262_2-5/8"-RH

Torsion Spring .262 x 2-5/8" x 12ft RH Red/Yellow

Wire size: .262
Inside diameter: 2-5/8"
Length: 12 ft

.273_2"-RH

Torsion Spring .273 x 2" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 2"
Length: 12 ft

19-50ML

Master Link #50

For #50 chain
ANSI Standard Carbon Steel

308302

Linear 2-Channel Multi-Code Key Ring Transmitter 310 MHz

Open/Close remote for 2 doors
Compatible with 310 MHz Stanley and Multi-Code receivers
Easy access to battery and coding switches - 10 dip switches
Power: 12-volt battery
Codes: 1024 codes for each channel (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

232168

Capacitor 3/4 HP 220V 65 MFD

For LCO75 only

219109

Capacitor 1/3 HP 43-53 MFD 250V

For LDO33 only

4004-16FT

Aluminum Retainer only for Heavy Brush 16' Long 45 degree

For angle application (45 degree)
For use with Heavy Brush

4007-8FT

Aluminum Retainer only for Light Brush 90 degree

For angle application
For use with Light Brush or Vinyl Insert.

1016-ADHESIVE

Adhesive for Storm Shield 6oz tube

For use with 1016

Safety data sheet

1003-1-5/8-14'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

1003-1-5/8-10'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

RCB-2560

Roller Chain Break #25 thru #60

Replacement tip included.

24-HWB-PAIR

Winding Bars Hex 24" Set of 2

Cold rolled hardened steel.
Hex shape keeps the bar from rolling away.
Machined to 1/2" at one end with a 5/8" outside dia. on the other end
Sold as a pair.

18-HWB-PAIR

Winding Bars Hex 18" Set of 2

Cold rolled hardened steel.
Hex shape keeps the bar from rolling away.
Machined to 7/16" at one end with a 1/2" outside dia. on the other end
Sold as a pair.

1104-16FT-SAND

Residential Side & Top PVC Weather-Strip with cap 16' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

7001-14-WHITE

Commercial Side & Top Weather-Strip 14' Long - White (W)

White galvanized steel with white dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

32-48-110

Extension Spring 8' Door - 110 lbs White ** Replaced by 27-48-110

Double - Loop
32" long 48" stretch 110 lb load
Springs sold individually

Spec Sheet

25-42-90

Extension Spring 7' Door - 90 lbs Light Blue

Double - Loop
25" long 42" stretch 90 lb load
Sold individually
Same as part number 109
Rated for 10000 cycles

Spec Sheet

27-20304

Truck Door Cable Drum and Bearing Curbside (RH) for Whiting Roll-Up Doors

Black nylon drum with bearing
Cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines Left or Right drum (Left = Red)
Cross Reference: 2548

26-40200

Truck Door Head Seal Only 96" Long for Roll-Up Doors

Seal molded from long lasting rubber
Cross Reference: T #69718 630300

26-14525

Truck Door Intermediate Panel (15" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

SF600U

Spring Fitting 6" Pair Universal Thread Stationary + Winding for 1" Shaft

Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
Pair includes: (1) winding & (1) stationary.
Not single thread.
Winding bar hole 5/8"


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login