Devanco Canada - Get The Right Garage Door Opener‎ and Parts

510.2755.00

Whiting Welded Brackets

This is an upcharge when ordering certain doors

O042010

AirLift Bracket Horizontal 90 Degree Lift Bar

7176.218.33.96

Whiting Heavy Duty Torsion Assembly .218 x 35" shaft 96"

EHJ-343-1

Doorlec Industrial Jackshaft Op. 1 HP 460V-3Ph

Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

GH-383-1

Doorlec Industrial Gearhead Door Operator 1 HP 208V 3-Phase

Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Worm gear reducer 40:1 ratio for high-torque and long life
Solenoid Disk Brake Prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Optional Friction Clutch available

.......more details

MM00050

Micanan 1-1/2" Collar Bracket #8 FDG MSI0054

75-12362

LiftMaster Adaptor Plate with Fasteners

Also known as: 7512362 K75-12362

2807.200.340

Whiting .200 x 2-3/16 x 34" Curbside with Cones

LEVER092

Manaras Close Limit Actuator

610.5600.3

Whiting Panel Option for Stainless Steel 5600.3 HD Bottom Roller Brackets

This is an upgrade option when purchasing a door or bottom panel

K75-30737

LiftMaster Disconnect Kit for GH

Disconnect Kit Complete with: Disconnect Lever Bevel Gear Yoke Brake Release Actuator Bracket Switch Actuator Disconnect Shaft Tension Spring Sash Chain with Keyring Screws Nuts Flat Washers Lock Washers Cotter Pins and Roll Pin.
Compatible with LiftMaster® Model GH Commercial Door Operators.

610.9723

Whiting Panel Option for Long Pull Strap 32" L

This is an upgrade option when purchasing a door or bottom panel

K-127A0112B

LiftMaster Chip Mega Arm

Also known as: K29-CHIP-535

115921-01

Wire Harness 66" long

Used on Rite-Hite dock leveler

XBA4

NICE Indicator Lights for M3/M5BAR 13.1ft

The Apollo XBA4 is a 13.1 ft long line of indicator lights for the click fixture on the upper or lower side of the barrier arm of the M3BAR and M5BAR barrier gate openers.

41B7418

LiftMaster Wire Harness Dual Light

Wire Harness Replacement Kit.
For use with various LiftMaster® and Chamberlain® Garage Door Openers; manufactured 2005 to 2013 that feature a dual light system

PORT-ROYAL-R16

Garex Ready to Install Door Special Order

R16 Insulation - Overlay moldings positioned to create the Port Royal design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

VERMONT-R16

Garex Ready to Install Door Special Order

R16 Insulation - Short Panel with vertical lines carriage style - Panel spacing does not allow for decorative handles - Decorative hinges can be used - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

URBAN-R12

Garex Ready to Install Door Special Order

R12 Insulation - Woodgrain with 1 narrow shadow line at the top and bottom of each panel - Available in steel white or black - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements

41D9044

LiftMaster Battery/ Logic Board Cover RJO

Compatible with 8500 and 8500W

2705.135.140

Whiting Curbside Torsion Spring 2-3/16" ID 14" Long

Torsion spring wire only
.135 wire size

41D8198

LiftMaster End Panel with all Labels and Light Socket

End panel works with various models

2523

Whiting Balancer Bracket End - Curbside for Whiting Roll-Up Doors

Steel construction
Plain finish
Cross Reference: W # 2523 for # 2376 balancer

SPR41B14A410B32

Sprocket 41B14-410A32 x 3/4 K0 0S w/Ollite Bushing

K75-19981

LiftMaster Arm Kit Model H/HJ

Compatible with LiftMaster® Models H and HJ Commercial Door Operators

2110-823

Linear Idler Assy Wheel with Bolt for 1/2hp SL Gate Op.

MGH-6435-ECB-LH

Manaras 1.5 HP 480V 3P Jackshaft with Elect. Circuit Board Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

2806.162.18

Whiting .162 x 2-3/16 x 18" Roadside with Cones

BCSI-PM12

Pivin Drapeau Clutch Disk for BCSI Gate Operator ** Price by Quote Only

Phenolic Friction Disc

K72-12591

LiftMaster Clutch Shaft Kit HMJ

H-0168

Autogate VBelt Banded B-66

New Style Double Reduction

2705.148_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .148 x 2-3/16" x 18" Long
For Roadside order part # 2704.148*180

PRO-GH-10021U-R

Micanan 1 HP 220V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

93D341

LiftMaster Cover Only Silver for EL25

Also known as 041D0341 41D341
Replacement cover for EL25

.235-3.25-11.5-LHW

Mini Storage Spring .235 x 3.25" x 11.5" long Left Hand

.406-6-L-C

Cut-to-Length Torsion Spring .406 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.306-334-R-C

Cut-to-Length Torsion Spring .306 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

PRO-GH-5053U-R

Micanan 1/2HP 575V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-GH-5043U-R

Micanan 1/2HP 460V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-H-5023-U-RH

Micanan 1/2HP 230V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

K72-19974-RB

LiftMaster Output Shaft & Sprocket

Kit includes: Output shaft sprocket assembly dual sprocket 32/14 sprocket 48B18x1 sprocket 50B12x1 ring washer key set screw roll pin and thin walled receivers

PRO-J-10043-U-LH

Micanan 1HP 460V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

25005

Doorlec Cam Shaft with G018 Explosion Proof

MK-00703

Micanan Harness 1-Phase 5-Relay Board

MK-00009

Micanan 9-Pole Control Terminal Strip

MK-00036

Micanan Overload Reset 1-Phase 7 Amps

PRO-PANEL

Micanan Custom Panel

Made according to customer's requirements

PRO-J-7511-U-RH

Micanan 3/4HP 115V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-GT-10021-U

Micanan 1HP 230V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-T-5023-U

Micanan 1/2HP 230V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

60-7248-CC07

Wheel Chock Safety Pkg incl'd: cast alum. alloy chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) CC-07 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Reversible Chock Design
One-Piece Cast Construction
Cast Aluminum Alloy
Size: 10" Base x 9" high x 6-1/4" wide

K23-30716

LiftMaster Stop Switch 120VAC 6A

Same as 20-30716

LB1210-36

Laminated Bumper Standard Black 10" x 36" 12" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TVB624-11SF

Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 24" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

.207-3-9-RHW

Mini Storage Spring .207 x 3" x 9" long Right Hand

AC636

Aluminium Threshold AC6 x 36" (3')

2806.139*170

Whiting .139 x 2-3/16 x 17" L Roadside with Cones

For Curbside order part # 2807.139.170

2650-112-11

Linear Cold Weather Package HSLG 230V

Factory Option 2650-112-11 Cold Weather Package for 230-volt HSLG
Package includes: Arctic Oil Heater Cogged Belt
This factory option is only available for purchase when buying your gate operator.

9004-08

Excalibur Threshold Kit 8'2" x 4" W Solid Aluminum ** Price by Quote Only

Stands 1/2" tall
Built with 6061-T6 solid aluminum to withstand extreme weight and excessive traffic conditions.
Two-way fastening/seal system won’t shift buckle or leak
Top V-groove design provides for skid proof protection and improved tire traction on loading docks and incline ramps.
The 1/2" diameter wire access port makes it easy for sensor and security installations.
The kit comes complete with pre-drilled counter sink holes 3/8" anchors and sealant.

.......more details

K77-10978

LiftMaster Hardware Box for Model MH

26CW94521-CUT

Truck Door Intermediate Panel (11" x Cut-to-Size) Painted White for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

2376.156.17.770

Whiting Torsion assembly .156 wire size 17" spring length 77" shaft

2806.148.140

Whiting .148 x 2-3/16 x 14" Roadside with Cones

60-8000-7

In-Tube Motor 110V for Screen Door

Replacement motor only
This is mainly a special pricing product DBS says that we have to contact them for any future pricing.

MU22-2WIRE-U-GRY

Miller Edge MU22 2-Wire Universal Gray - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

SHAFT116

Manaras Input Shaft for OSH

915CAN0008

Stationary Side Only Universal Spring Fiting

2376.171_22.840

Whiting Torsion assembly .171 wire size 22" spring length 84" shaft

JDMG-LG-A030

GDI Jackshaft 24VDC Nema 4

Brushless DC high reliability high efficiency and low maintenance motor
No maintenance GearMotor sealed stainless steel bearings no limits switches no belts or no hydraulic cylinders to maintain
Soft start soft stop
Includes cycle counter timer-to-close 10ft motor wire harness
Battery backup optional (sold separately)

Sell sheet Technical document

BCH753L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Left Hand ***Replaced by CRBH753L5-LH

Industrial Duty Hoist Operator with Damp Environment modification
Comes with CPS-UN4 photoeyes
External brake included

Installation manual Manuel d'installation Sell sheet Brochure

790919

FAAC Control Board 115V for 455D

K180B0325-5

Rocker Switch / Circuit Breaker 250VAC

1104-18'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 18' Long - Light Bronze (F) **NLA

Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Full case quantity only (12).

K20-1050B-1RL

LiftMaster Electric Motor 1/2 HP 115V 1Ph BM

1/2HP 115V 1 PH resilient base mount motor with one drive shaft key.
Check the manual for your specific model number before ordering to ensure compatibility.

5-30-6

3" Vertical Track 12-GA 11'-4" (12' door) Sold per Pair

Pierced track

9382263800

Square Torsion Spring .375 x 6 x 38" with Cones RHW 1-1/4" Bore

.306-.250-DUPLX

Duplex Assembly .306 x 6" x 39" and .250 x 3-3/4" x 39" with Cones Right Hand

Assembled by manufacturer

K72-33873

LiftMaster Output Shaft Kit MT / BMT

Complete kit includes output shaft bearings sprockets chain roll pin and turac

K75-12586

LiftMaster Complete Brake Assembly GH 575V

Complete assembly includes: Brake hub kit Brake release lever Brake disk Spring cup Studs Compression springs Brake solenoid Solenoid cover Spacers Mounting plate Pressure plate Feather key and Fastener.

Installation Manual Manuel d'installation

GH4416-07-R

Green Hinge #7 12-ga Right Hand *** to extent of inventory

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-06-R

Green Hinge #6 12-ga Right Hand *** to extent of inventory

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

11-10987

LiftMaster Clutch Shaft for MH

.207-2-5/8-LH-C

Torsion Spring .207 x 2-5/8" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .207 ID: 2-5/8" Length: 12 ft

OPJ-6533-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 600V 3 Ph with Elect Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

OMJ-6112-ECB

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board

Designed for use on standard high and vertical lift sectional doors
Can also be used on small rolling doors and grills
Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
Mechanical brake
Floor level disconnect mechanism which must be engaged for manual push-up operation
14 cycles per hour 50 cycles per day

.......more details

Installation Manual Sell Sheet

Q404

LiftMaster Omni Siren K29-50279 **to extent of inventory

Q400MAU

LiftMaster Relay Module

K75-19985

LiftMaster Clutch Pulley Assembly

Fits model H operator with Logic 5

V1104-GREY

Replacement Vinyl Only for 1104-Grey 200ft Roll

Sold in 200 ft rolls only

2704.177_270

Whiting Roadside Torsion Spring 2-3/16" ID 27" Long

Torsion spring wire only
.177 wire size

41C2735

LiftMaster Chain and Cable Assembly CMC84

Fits a Sears Craftman CMC84 operator

510.5920.06

Whiting Stainless Steel Rivets Option for Dry Freight Door 5-Rows of Hinges 6 Panels

Upgrade option

13-3510*

LiftMaster Chain Guide ***NLA

This is NLA as a part by itself but may be purchased in a kit K75-18493

2X6SC50

Devanco Loop 2' x 6' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection