Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
RCB-60100

Roller Chain Break #60 thru #100

88824

Marantec Sprocket Holder Assbly For Heavy Duty 1.2mm Belt Rails Only

  • Compatible with Marantec Heavy Duty (1.2mm - 18 gauge) 2-Piece & Standard Belt Rail
  • Compatible with Marantec models: LC1000 M4500 M4500e M4500eI M4700 M4700e M4700eI M4900e Q7500 Q7700 Q7900 Synergy 260 Synergy 270 Synergy 280 Synergy 360 Synergy 370 Synergy LC and Synergy Solo
  • Compatible with Marantec belt rails: M13-1207B M13-1208B M13-1210B M13-1212B. M13-1214B
T110

Manaras Trolley Track 10ft for 3/4HP & All APT models

  • For models OTH/OTBH/RTBH 3/4 hp only with Chain #41
T108

Manaras Trolley Track 8ft for 3/4 HP models

  • For models OTH/OTBH/RTBH 3/4hp only with Chain #41
F210

NICE Adjustable Synchronised Photocells Thru Beam Includes Metal Housing (F210/ FA1)

  • The beam of the Nice F210 photocells has a horizontal scope of 210° thereby increasing the safety level of the system and simplifying installation: the gate or garage door to be automated quite often slide flush with the wall making it very difficult to position the photocell.
  • The F210 photocells are available with relay output
CABLEKIT001

Manaras Comm. Receiver Antenna w/15' Coaxial Cable

MIC001

Manaras Internet Control Device Modification (Op has to be compatible)

  • The internet control device allows you to control and monitor your garage door from anywhere using the MIC app and your smart device
  • Includes the MIC device and Wi-Fi compatible board & software
  • Must be purchased and used with a Manaras monitored operator
K10-34758-2

LiftMaster Battery Tray CSL24U

  • For use with CSL24U
  • Also known as: K75-34986-2
D-2-6-KA

Keyed Disconnect Device 6ft Cable Keyed Alike (Special Order)

  • Operated from the outside to disconnect the trolley for manual operation of the door
  • Must specify if keyed alike is required or keyed random will be shipped
  • Mounting plate dimensions: 2 1/2” x 1 3/32”
O01R1110

AirLift Op. Original 10ft Complete w/hardware

HW-KEY-SQ-316058

Lynx Straight Key 3/16" x 5/8" Long

99000568

Amarr Bottom U-Seal 3.5" Gray Vinyl 1/4" T 200'

  • 1/4" T width
  • Used on Strat 3000 Herit 3000 and Commercial (exceot 1350 & 2700)
K87-E-118

LiftMaster E-Ring Idler Shaft

  • Also known as: 87E118 87-E-118 G87E118
  • Commonly used with LiftMaster® SL595 Series; and various Commercial Slide Gate Operators
PC-3

EMX Infrared Modulated Photoeye Thru Beam

  • Thru beam configuration
  • LED alignment indicator simplifies installation
  • No calibration or sensitivity adjustments needed
  • Wide sensing angle for increased reliability
  • 30 ft. operating range
  • Housing: Black PVC * Not water tight
    • .......more details
HYBRID-BLK-8

Residential Side & Top PVC/Aluminum W/S with cap 8' Long (97") - Black

  • Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with aluminum slide-on cap to hide screws.
7-6097

RW Hanger 150B1

  • Apron: Laterally adjustable formed steel 11-3/4" l. x 4" w.
  • Pendant: 3/4" dia. square head bolt with adjusting nut zinc plated
  • Door Thickness: 1-3/4" to 2-1/4
  • Includes: 1 Pair in a box.
  • Included in each box: 12 flat head stove bolts 3/8" dia. x 2-3/4" l. for 150B1 12 flat head stove bolts 3/8" dia. x 4" l. for 150B2 2 carriage bolts 7/16" dia. x 1"â??long 1 lock joint clip for No. 33 track. 2 blinds for track ends
  • Wheels: 3" diameter Steel
    • .......more details
71-17148

LiftMaster Fuse Link Kit FDC

  • Fuse Link Replacement Kit for use with various LiftMaster® Fire Door Commercial Door Operators and Commercial Access Solutions
OWL

EMX Microwave Motion & Infrared Presence Sensor

  • The OWL is a vehicle motion and presence sensor that uses microwave and infrared technology to activate automatic doors and industrial gates.
  • Featuring two configurable outputs vehicle motion detection as well as presence detection the OWL activation sensor will ensure the safety of people and goods.
  • Mounting Height: 11.5-21.3 ft (3.5-6.5 m)
  • Supply Voltage: 12-24 VDC/AC
  • Dimensions: 9” (229 mm) x 5” (127 mm) x 5” (127 mm)
  • Connections: 32 ft (10 m) 8 conductor cable directly from sensor
    • .......more details
ManualSell SheetQuickstart Guide
BK027/PR

Commercial Bottom Bracket 1-3/8" 2"or 3" Inside Hook Up BB-4 Sold as a Pair *Includes (1) Right and (1) Left Bracket (2) Clevis Pins (2) Cotter Pins*

  • Includes 1 left and 1 right hand bracket
  • BB-4 SF
ME123-2M-BLK-RH

Miller Edge Black RH 2-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
4580-304-BRONZE

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Bronze (Commercial Brown) 458-47 *** To Extent of Inventory

  • 304ml cartridge
  • Ideal for movement and perimeters joints
  • Meets ASTM C920 S NS Class 50 NT M GA O
  • Meets AAMA 802 and 805 standards
  • Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
  • Excellent resistance to UVs for indoor and outdoor use
    • .......more details
HDSL24UL

Liftmaster Heavy-Duty Variable Speed Slide Gate Op. 24VDC for Heavy Gates.

  • 1.5 HP Variable Speed Slide Gate operator for gates up to 75' and 3000lbs
  • Battery backup provides up to 45 cycles or 120 days of standby power
  • Smooth Start/Stop with variable travel speed of .5ft/sec to 1ft/ second.
  • 120/240 input voltage optional 3 phase converter for 208/240/460/575
  • On-Board Secutiry+ 2.0® Receiver accepts (50x) 8 series remotes or unlimited 811 remotes.
  • Includes LMRRUL Monitored Retroreflective Photo Eye with intergral heater
    • .......more details
HDSL24UL - Installation ManualHDSL24UL Manuel DInstallationProduct Guide (EN)Guide du Produit (FR)
FT-1

Nortek Field Test Receiver

  • Tests for RF interference on MegaCode and AllStar based access control panels receivers and garage door operators
  • Compact and lightweight with battery save feature
  • Built-in speaker lets user hear what receiver hears
  • Special tone simplifies transmitter testing
  • Visual LED indication to confirm interference
  • Frequency: Wide band 318 MHz center frequency
    • .......more details
167542

Wayne Dalton Strut Clip

236514

Wayne Dalton Res. Bottom Bracket Roller Holder RH

  • Compatible with Wayne Dalton 9100 9400 9600 9800 Foamcore II garage door models.
  • Pins & Cotters Included
  • Top quality galvanized steel
  • Dimensions: 4" Wide x 1.25" High x 1" side flange with milford pin
  • Sold as a single unit
T107

Manaras Trolley Track 7ft for 3/4HP models #41 Chain *Actual length 114"*

  • For models MGT/OTH/OTBH 3/4 hp only with Chain #41
10-10930

LiftMaster External Disconnect Bracket

  • Also known as: 10-7006 G107006 107006 1010930
OS-6X6-W-DOOR

Garex Overstock 6'x6' Woodgrain White Complete Door

  • One woodgrain 4 x 18" panel door brand new.
  • 12" radius 1-3/4".
  • Floor to ceiling 84"
210135

Skylink Chain for 7ft Door

  • Replacement chain for chain rail
RADIO-EM102

Manaras Mini 3-btn Rolling Code transmitter 390 MHz

  • Field Configurable
  • Hand Held or Keychain three button
  • Rolling Code Technology
  • 1 Door (SD) Open/Close/Stop or Multiple Doors (MD) 1-3 single-button field selectable
  • Config. Trad. Comm. Sesquence or Alternating Sequence (SBC) Open/Close/Stop (with ECB)
  • Nema 1
    • .......more details
Manual
19-40ML-NP

Master Link #40 Nickel Plated

  • For #40 chain
7-22-1

Replacement Cylinder Zinc Includes 2 Keys

  • Includes 2 keys Screws Backer Plate and Outer ring
BOARD003

Manaras Repl. Circuit Board MA-50 110V Lite Duty

  • Used on model MDTB
18212

Limit Switch LS2 G3M Female

  • For use with Rite-Hite dock levelers
380UT

LiftMaster Universal 2-btn Transmitter Gen 5

  • The Universal Remote Control is compatible with most major brands of garage door openers gate operators and commercial door operators
  • Operates up to two brands of garage door openers eliminating the need of multiple remotes on your vehicle visor.
  • Universal compatibility allows you to operate two different garage door manufacturers and/or frequencies at the same time
  • Security+ 2.0®
  • Compatible with: LiftMaster® Chamberlain® Craftsman® 390MHz 315MHz 310MHz Security+2.0 390 MHz Security+ Rolling Code 315 MHz Security+ Rolling Code 390 MHz Billion Code 390 MHz Dip Switch (7 8 and 9 position)
  • Genie® 390 MHz Rolling Code (Intellicode) 315 MHz Rolling Code(Intellicode) 390 MHz Dip Switch (9 and 12 position)
    • .......more details
380UT Manual (EN/FR)
MA005

LiftMaster Gear Reducer 60:1

  • Replacement Gear Box (60:1).
  • Compatible with LiftMaster MADCBB MATDCBB MASTDCBB
WA11

NICE Adjustable Stand for L & M BAR Gate Op

  • Adjustable stand for the barrier arms of the M-Bar & L-Bar barrier gate operators
  • Attaches to ground and provides support when arm is down
CP-BR-ASSY-575V

Lynx Brake Kit with 575V Solenoid CDJH

  • Complete brake kit with solenoid
GHW-353-1HP-RH

Doorlec Ind. Duty Jackshaft Carwash Op. 1 HP 575V 3P with ECB

  • With DC2000 logic board
  • Worm-Gear Jackshaft type Industrial operator NEMA 4/12
CDJH-12-115-ECB

Lynx CDJH Heavy-Duty Jackshaft 1/2 HP 115V with ECB UL325

  • New LX100 circuit board.
  • Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
  • 4L V-belt primary reduction #41 drive chain and sprockets.
  • Adjustable friction clutch Inherent Mechanical Brake included
  • Solenoid brake optional **
  • Fully driven adjustable limit switches.
    • .......more details
OPH-6233-ECB-LH

Manaras Opera-H 3/4HP 208V 3Ph with Electronic Circuit Board Left Hand

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
2000Z

LiftMaster HD Roller Cage Bearing Hinge Flat Mount Both Sides Prime Coated Sold in Pairs

  • Heavy Duty Construction for Maximum Durability
  • Dependable Roller Cage Bearing Design
  • Even Weight Distribution
  • Five Times The Weight-Bearing Surface of the Nearest Large Hinge
  • Largest Weld Surface in the Industry
  • Easy to Fully Lubricate
    • .......more details
VFOH5011

LiftMaster Variable Speed Front of Hood Op. 1/2 HP 120V with CPS-U

  • Front of Hood Mount for Rolling Steel Doors and Grilles.
  • Variable speed up to 12”/sec with smooth start/stop feature.
  • Floor level controls with intuitive menu driven interface.
  • Accepts: (30) 3-Button Remote Controls or (90) 1-Button Remote Controls
  • Accepts an additional 30 Wireless keypads and Unlimited Dip Switch remotes
  • Includes: 1 x Powerhead (with 16.5 ft. Integrated Hoist Chain) 1 x Controller 1 x Powerhead Mounting Bracket with Hardware 1 x VFD Cable (22 ft. Standard) 1 x Encoder Cable (22 ft. Standard) 1 x #50 Drive Chain 1 x 40-Tooth Sprocket 1 x LiftMaster Monitored Entrapment Protection (CPS-U Standard
    • .......more details
PTM-24V

EMX 7 Day Programmable Timer 24V

  • The PTM is an easy to program 7 day timer that provides secure access to any facility any time.
  • With up to 16 ON/OFF events per day and 15 different daily options.
  • Its DIN rail mount design and wide power supply options (12 or 24 Volt) make installation easy.
  • The battery backup saves stored programs in the case of power loss.
  • Select either a 12 or 24 hour clock format to program access times for overhead doors gates and parking barriers.
  • The PTM can reduce the wear and tear on motor controls and extend the life of your equipment.
    • .......more details
Instruction manualSpec sheetComparison guide
30002

Doorlec Brake Solenoid 230V with wire leads

  • orks with all 230V Doorlec Commercial and Gate operators
30003

Doorlec Brake Solenoid 115V with wire leads

  • Works with all 115 Volt Doorlec Commercial and Gate operators
106-0006

Rodent Block Pull Chain Seal 2.5"

  • Often overlooked and left unprotected the opening for the pull chain on dock levelers is an ideal entry point for mice and rats.
  • The chain provides a built-in ladder for pests and the chain opening is more than big enough for rats or mice to squeeze through.
  • Features solid cast aluminum construction easy to install and completely cover the chain opening.
  • The seals are designed to sit completely below the surface of the dock plate and will not interfere with material handling equipment.
OSH-6812-ECB-LH

Manaras Opera-SH 1/2 HP 208V 1Ph with Electronic Circuit Board Left hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Q027

LiftMaster Motor Capacitor 240VAC 65 MFD K29C-65AU2415

  • Replacement Motor Capacitor (65uF 240VAC 50/60Hz).
  • Compatible with LiftMaster® CSW200U & SL3000U Models (post 2016) and various Commercial Swing and Slide Gate Operators; manufactured before 2016
  • Dimensions: 2" diameter x 4-1/4" long.
GH-383-3/4

Doorlec Industrial Jackshaft Door Operator 3/4 HP 208V 3P with ECB

  • Custom-designed extra heavy-duty industrial-type electric door operator
  • Worm gear reducer 40:1 ratio
  • #60 roller chain and sprockets from operator shaft to door shaft.
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter
  • Rotary type limit switches
    • .......more details
CP1L-L14DR-A

Programmable Omron Automate 14 E/S ** Price by Quote Only

  • Works on BCSI-HV 240 single phase
K20-3075B-4P-H24

LiftMaster Electric Motor 3/4 HP 230/460V 3P L5

  • This is a replacement Motor Kit (3/4 HP 230/460V 3PH L5).
  • Compatible with various LiftMaster® Logic 5.0 Standard-Duty Belt Commercial Door Operators
14211

Doorlec Solenoid-Brake Lever Upper

  • Fits model LJH
14-1002

PVC Roll 8" x .120" Standard Smooth 200' for Replacement Strip Curtain

  • Suitable for most average applications.
  • Temperature Range: -20°F to 150°F (-28° C to 66° C).
  • Formulated with ingredients that meet USDA requirements for incidental food contact.
MYQ-SGC1WLM

LiftMaster Smart Garage Camera ***No Longer Available

  • The LiftMaster Smart Garage Camera™ is compatible with all myQ connected garage door openers.
  • It works directly with all LiftMaster openers with the Wi-Fi logo and can work with most garage door opener brands manufactured after 1993 when paired with the myQ Smart Garage™ Hub(821LMB).
  • myQ Connected: monitor the garage through a live feed or recorded event using the myQ app.
  • Video camera begins recording when motion is detected.
  • Easy setup with Bluetooth and magnetic mounting base.
  • Enables secure in-garage delivery for Amazon Prime packages
    • .......more details
3BXT-YELLOW

Replacement Button/Switch Only - Yellow

  • Replacement button for 3BXT
16-8001

LiftMaster Cogged Vbelt 4L 34"

  • This is a replacement Belt (4L340).
  • Compatible with LiftMaster® Model BG770 Barrier Gate Operators.
108207

Fasteners Self Drill & Tap Tek Screw 5/16-12 x 1" 100/Bag

  • Indented Hex Washer Head
  • 7/16" Head
  • Max RPM = 2000
BRAKEPART020

Manaras Brake Shoe Assembly Kit (SHOE021/022)

ME113-C7

Miller Edge PVC Mounting Channel Flat Sold by the Foot

255743

Wayne Dalton D-Shaped Bottom Seal Black Sold per Foot

  • Black only
  • Flexible PVC
URBAN-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Woodgrain with 1 narrow shadow line at the top and bottom of each panel - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
PREM-SEL-XL-R16

Garex Ready to Install Door Special Order Premium Select XL R16

  • R16 Insulation - Long Panel - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
PREM-SEL-MX-R16

Garex Ready to Install Door Special Order Premium Select MX R16

  • R16 Insulation - Mix of short and long panels - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - 7' to 9' wide doors will have 1 short and 1 long embossment - 10' to 11' wide doors will have 2 short and 1 long embossment - 12' to 18' wide doors will have 2 short and 2 long embossments - Composite end blocks eliminates corrosion and wood deterioation
WHTG-COLDSAVER

Whiting Special Order ColdSaver Door ** POR

  • Special order to customer's specs
  • 2-1/8” thick panels built with aluminum facings inside and out for easy cleaning and excellent acceptance of paint and decals.
  • No rivets on face of door to interfere with lettering or decals.
  • Aluminum extruded panels .070” thick resist puncture.
  • Foam-in-place urethane insulation.
  • Panel joints are double sealed.
    • .......more details
WHTG-TEMPGUARD

Whiting Special Order TempGuard Door **POR

  • Special order to customer's specs
  • 1-1/2” fiberglass panels are clad with aluminum exterior facing for easy cleaning and excellent acceptance of paint and decals.
  • No rivets on face of door to interfere with lettering or decals.
  • One piece pultruded fiberglass shell featuring foam-in-place urethane insulation.
  • All hinge fasteners reinforced with steel backing plates.
  • Replaceable double seal at each panel joint.
    • .......more details
CP-PW-NM-MCJH

Lynx Pocket Wheel for MCJH 6"x1" Bore Long Hub

20449R

Genie Chain Glide Rear Housing Cover

  • Compatible with models: PCG400 PCG450 PCG500ML PCG600 PCG700ML PCG700FN GCG350L GCG350ML H2000C 1020L 2020L
  • Contains gear housing cover only
31111

Doorlec Sprocket 50B70 2" Bore KW/SS 1/2T

HD8460-KYD-ALIKE

T-Handle Cable Lock System 1-3/8"- 2" ** Keyed Alike **

  • Complete cable locking system for a 1-3/8" or 2" door Keyed alike
  • System includes: Auto Latch Striker Keeper T-Handle keyed with 4-1/4" shaft Inside release handle 3/32" cable and all required hardware.
  • Also works for for 1-3/4" doors
  • T handle KA5 = keyed alike increment of 100 (5 different combination box (20 of each #)
MGR20-Y-2R-04

Miller Edge Sensing Edge Round Yellow 2-Wire Right Hand Outlet 4ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
XBA3/U

NICE MBAR Replacement Logic Board

11-10014

LiftMaster Clutch Shaft

  • Commercial door opener clutch shaft
  • 11 7/8" Long; 1/2" Wide
12-3000

Flanged Bearing 1-1/4" x 1/8" **to extent of inventory

  • Fits SW470 gate operator
LVB420-11SF/P1

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
17350

Doorlec Cable 5ft with Antenna

IS40-XL

BEA Industrial Sensor Low Mount Dual Technology Presence Detection BEA-10IS40XL

  • Dual technology sensor combining presence and motion detection in industrial applications.
  • Bidirectional unidirectional approach and unidirectional depart microwave detection options. Six modes of detection filtering and 9 uniqueinfrared patterns for highliy flexible presence detection.
  • Up to 7 minimum object targets
  • Adjustable infrared immunity modes to mitigate environmental disturbances (vibrations light and sun)
  • Mounting height: 6.5ft - 11.5ft
  • NEMA 4
    • .......more details
Installation manualSell sheetCut sheet
26117

Doorlec Limit Cam Retainer Plate

  • Fits Most Doorlec Commercial operators except Explosion-Proof Operators
  • Will not fit on waterproof operators with small electrical enclosure built before 1999
MSC330V72-BULK

Motor Start Capacitor 330V 72-86MF

PL-A23-RPM-BRKT

Lynx RPM Reader Board Bracket Only

PL-A21-RPM-WHEEL

Lynx RPM Reader Wheel

K180A0357

LiftMaster Reset Switch

  • Compatible with LiftMaster RSW12UL CSW24V swing gate operators
  • Switch to Reset/Disconnect position to disconnect the operator for manual operation
  • Switch to Normal Operation position to return to automatic gate operator functions
  • Dimensions: 3/4" L x 3/8" W x 2" H
K23-34815-1

LiftMaster Stop / Reset Switch Black Face

  • For use with SL595UL Series heavy-duty industrial slide gate ops
.234-3.5-11.25-LHW

Mini Storage Spring .234 x 3.5" x 11.25" long Looped Ends Left Hand

RP-MTR-AO-RSL-12

Lynx Electric Motor AO RSL 1/2 hp 120V ** NLA

  • For residential opener MRE
CP-IDLER-ASY-MCBH

Lynx Front Idler Assembly Commercial MCBH

Q238

LiftMaster Gate Adjustment Switch K75-50339

  • This replacement kit is compatible with the following models: CSW200 CSW200U CSW200UL ROBO SWING
Q076

LiftMaster Turn Buckle Kit K75-50132

  • For Liftmaster trolley operator HCT
Q200

LiftMaster Chain Coupling Release K07-50215

  • For Liftmaster trolley operator HCT
029C98100

T-Style Complete Replacement Door White Stainless Steel Package 029C98100

  • Complete Replacement door size between 98" wide x 100" high
  • Painted white
  • Stainless steel package
  • Includes Vertical and Horizontal Track Operator assembly Hinges Rollers and Cable
  • Price varies according to size
15

Whiting Truck Door Center Hinge

OPH-6212-ECB-LH

Manaras Opera-H 1/2HP 240V 1Ph with Electronic Circuit Board Left Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
050DCJCWFSD

LiftMaster Receiver Logic Board DC. WiFi CJO Sectional

  • 050DCJCWFSD is a 315MHz Security+ 2.0® Receiver Logic Board featuring Wi-Fi® with myQ® technology.
  • For use with various LiftMaster® Light-Duty Series Jackshaft Door Operators for sectional doors; manufactured after 2018.
  • The unit will feature a yellow learn button.
CBC532-SS

Thimble 5/32" Stainless Steel Sold Individually

31118

Doorlec Sprocket 41B12-5/8" Plain Bore

  • Plain bore no keyway
K76-36681

Liftmaster Replacement Antenna for STAR1000

  • This is an antenna replacement kit for the PPWR & STAR 1000
Q118

LiftMaster Access Door Keys Qty 2 K80-50295

  • Also Known as K80-50295
2523

Whiting Balancer Bracket End - Curbside for Whiting Roll-Up Doors

  • Steel construction
  • Plain finish
  • Cross Reference: W # 2523 for # 2376 balancer
SA1929/A17

Automatic Systems Retrofit Logic Board with Drive for BL229 Board *** Disc

  • Retrofit Assembly for the BL229 board this includes the new logic board with the drive.
  • Comes with E/BLOP/371 which are the loop detectors that go with that board. (no cost for the moment)
K20-1100-1T

LiftMaster Electric Motor 1/2 HP 115V 1Ph TEFC **DISCONTINUED

  • Compatible with LiftMaster® Model SW490GL Swing Gate Operators
  • Also known as: 20-1100-1T 2011001T G2011001T