Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
SEL2681R868-Z2

Erone 2-Relay Stand Alone Receiver 868MHz

Wireless System Chart
MM-00366

Micanan Circuit Board N-4 Support U-Bracket

MK-00052

Micanan Overload Reset 3-Phase 5.5 - 8.0 Amps

MK-00041

Micanan Overload Reset 1-Phase 12 Amps

MK-00141

Micanan Transformer 220V-24V-100VA

MK-00025

Micanan Double Limit Switch Cherry DAT

K001D8397-1

LiftMaster Power Board 3ph 575V L5

  • This is a 3PH/L5 Power Board 575V Replacement Kit. Compatible with various LiftMaster® 3 Phase Logic 5.0 Commercial Door Operators; equipped with current sense
MV-00019

Micanan Pull Cord SPST Lever Type - Nema 4

MV-00008

Micanan 2-btn O/C Nema-4 Pushbutton Control Station

  • Surface mount
  • Non-Metallic
MK-00522

Micanan Relay 24 VAC 8-Pin Plug-In

ME110-2W-BLK-L

Miller Edge 2-Wire Black Left Hand Outlet 7/8" wide x 3/4" high Sold by the Foot

  • Electromechanical pressure sensitive edge for counter shutters rolling doors and barrier arm applications.
  • Touch sensitive signaling that allows for immediate stopping and reversing of motion.
  • Temperature range -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration.
    • .......more details
Worksheet
PRO-J-10083-U-RH

Micanan 1HP 208V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
PRO-J-10081-U-LH

Micanan 1HP 208V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
PRO-J-10011-U-LH

Micanan 1HP 115V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Installation Manual (EN) Specification Sheet
.406-334-R

Cut-to-Length Torsion Spring .406 x 3-3/4" Right Hand Wound Blue/Yellow

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.319-514-L

Cut-to-Length Torsion Spring .319 x 5-1/4" Left Hand Wound Blue/Green

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-514-Installed
.331-258-R

Cut-to-Length Torsion Spring .331 x 2-5/8" Right Hand Wound Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.319-514-R

Cut-to-Length Torsion Spring .319 x 5-1/4" Right Hand Wound Blue/Green

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-514-Installed
.306-514-L

Cut-to-Length Torsion Spring .306 x 5-1/4" Left Hand Wound Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.295-514-L

Cut-to-Length Torsion Spring .295 x 5-1/4" Left Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-514-INSTALLED
.295-514-R

Cut-to-Length Torsion Spring .295 x 5-1/4" Right Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-514-INSTALLED
.283-6-R

Cut-to-Length Torsion Spring .283 x 6" Right Hand Wound White

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-600-INSTALLED
PRO-J-7581-U-LH

Micanan 3/4HP 208V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
PRO-J-5023-U-RH

Micanan 1/2HP 230V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
PRO-GT-10011-U

Micanan 1HP 115V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-5043-U

Micanan 1/2HP 460V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-5023-U

Micanan 1/2HP 230V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

  • On-Board receiver holds up to 20 transmitters
CP-HU-TC3-34-575/3

Lynx TC3 Medium-Heavy Duty Trolley Op. 3/4 HP 575V 3P Contactor Style

PRO-APTB-5011-U

Micanan 1/2HP 115V 1P Apartment Trolley Operator With Brake N1 Eyes Monitored ECB

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-APTB-5081-U

Micanan 1/2HP 208V 1P Apartment Trolley Operator With Brake N1 Eyes Monitored ECB

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-APT-7523-U

Micanan 3/4HP 230V 3P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
PRO-APT-7581-U

Micanan 3/4HP 208V 1P Apartment Trolley Operator N1 Eyes Monitored ECB

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
PRO-APT-7511-U

Micanan 3/4HP 115V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
PRO-TB-10043-U

Micanan 1 HP 460V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 & 1 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-TB-10081-U

Micanan 1 HP 208V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 & 1 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-T-7521-U

Micanan 3/4HP 230V 1P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
PRO-T-5081-U

Micanan 1/2HP 208V 1P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-T-5011-U

Micanan 1/2HP 115V 1P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
811-11

Wheel Chock 811-11 Orange Urethane

  • Not For Use on Ice
  • High Visibility
  • Orange Urethane
  • Size: 11" wide x 8" long x 8" high
60-7248-SC8

Wheel Chock Safety Pkg incl'd: alum. chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) SC-8 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • "Claw" Like Bottom Assures Dependable Grip on Any Surface
  • Chock Fits Snug Under Tire Contour for Maximum Holding Power
  • Often Preferred For Snow and Ice Conditions
  • Light Weight and Reliable
  • Size: 7" wide x 11-1/2" long x 8" high
    • .......more details
60-7248-MWC32

Wheel Chock Safety Pkg incl'd: chock w eye hook wall bracket 15' chain 3/8"x1 7/8" anchors (4) 3/16" quick link (2) & English caution sign

  • System Includes (1) MWC-32 Chock Bracket Tie Back Chain English Caution Sign and (4) Wall Bracket Anchors
  • Good stability over others in this class
  • Long Lasting 80 Durometer rubber
  • Size: 6-1/2" wide x 9-1/2" long x 8-1/2" high
CBI-087

Wheel Chock CBI-087 Cast Ductile Iron

  • Cast Ductile Iron for Impressive Strength
  • Painted Yellow for High Visibility
  • Size: 8-1/4" wide x7-1/4" long x 8-1/2" high
K10-33850

LiftMaster E-Box Cover MH MJ MT

41C76

LiftMaster Belt Sprocket Cover Kit

  • Also known as: 041C0076 41C53 41D469 99324608
ME123-C7

Miller Edge Flat 3-1/2" Wide PVC Mounting Channel Sold by the Foot

L

Molded Rubber Bumper Black 18" L x 8" W x 18" 4" Projection 3-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
  • Bumper comes with 3 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
  • 18" L x 8" W x 18" 4" Projection
    • .......more details
T

Molded Rubber Bumper Black 22" L x 10" W x 12" W 3" Projection Centered Reflector 3-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
  • Bumper comes with 3 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
    • .......more details
DBE-10

Molded Rubber Bumper Black 10" L x 4 1/2" W 3" Projection 2-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
  • Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
  • 10" L x 4 1/2" W 3" Projection
    • .......more details
M2818

Molded Rubber Bumper Black 18" L x 8" W 2" Projection 2-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles
  • Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
    • .......more details
LVB824-11

Laminated Bumper Black 8" Projection Vertical Installation 24" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB812-24

Laminated Bumper Standard Black 12" x 24" 8" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB812-18

Laminated Bumper Standard Black 12" x 18" 8" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB412-24SF

Steel Faced Laminated Bumper Black 12" x 24" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
STRUT-2-1/4-12'-NH

Door Strut 2-1/4" Non Hemmed 12 ft Long

  • Reinforcement bar 2-1/4"
LB610-18

Laminated Bumper Standard Black 10" x 18" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LLB420-22

Laminated Bumper Black 4" Projection L-Shaped 20" x 22" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • This model has angles on both sides
    • .......more details
AC636

Aluminium Threshold AC6 x 36" (3')

MK-00805

Micanan Heater Probe in Reducer 24V 20W Brass Fitting Field Install

44-60-280

Extension Spring 10' Door - 280 lbs Gold ** By Quote Only

  • Clipped ends
  • 44" long 60" stretch 280 lb load
1324-1-3/4"-BLK

Elton Commercial Window 1-3/4" thick 1324 Black Frame Sealed Glass ** Discontinued

  • Screw together window kit
  • Plexiglas window
  • Frame size tip-to-tip: 26-3/4" x 14-1/2"
  • Cut-out size: 25-5/8" x 13-3/8"
  • Vision area: 23-7/8" x 11-9/16"
  • Different glass options and frame colours are available upon request
    • .......more details
MK-00694

Micanan 10K OHM Resistor *** DISC Repl by MK00713

K32-8002

LiftMaster Gear Reducer

  • Also known as: 32-8000 G328001 32-8001 328002 328001 32-8002 G328002
PRO-PL-INV-200-23

Micanan Wall Mounted Control Panel with Variable Frequency Drive Mod. 2HP 230V 3 PH

  • Additional charges apply for adding PBS on cover or if panel is not ordered with an operator
Z9211-1

Stationary Cone Tool 1-3/4" & 2"

  • Easily dislodges the cone from the torsion spring
MM00149

Micanan GHC Frame Support U-Bracket MSI0161 (for 2 3HP)

MF00019

Micanan Hex Head Bolt 3/8"- 16 UNCx1 Full Thread

  • Used on PRO-GHC
  • 6 required per operator
SL585103U

LiftMaster Industrial Slide Gate Op.1 HP 208/230/460V 3 Phase - Heater NOT Incl.

  • POWER: 115/208/230 VAC. Single Phase
  • ACCESSORY POWER: 24VAC 500mA max.
  • MONITORED SAFETY INPUTS: 3 Main Board 3 Expansion Board.
  • TEMPERATURE SPECIFICATIONS: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater -40°F (-40°C) to 140°F (60°C).
  • Heater option: HTRNB or NTR460 for 460V operators
  • UL USAGE CLASSIFICATION I II III and IV.
    • .......more details
Installation manualManuel d'installationFirst step for installationPremière étape pour l'installationSell sheetBrochureWiring diagramSchéma câblage
BB-1

Rubber Button Cover Black for 3BLM PBS

  • Rubber button cover only
TRACK-SET-2

2" Tracks Set with Wall Brackets Special Order

  • Custom order to customer's needs
  • Set includes the vertical and horizontal tracks and wall clips for either wood or steel.
  • Must spcify if the door has torsion or extension springs if the tracks are going on a wood jam or steel desired radius and thickness of door
VWS-34-WHITE

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box White

  • Pan head
  • S point
VWS-34-BLACK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Black

  • Pan head
  • S point
7-19-1

Lock Bar Guide Only

MOD076

Manaras Motor 208V/1Ph 60 Hz Modification No extra charge

  • The standard 240V/1Ph op. is coverted to 208V/1Ph incoming power supply
SEL2643R318-IP

Erone 2-Relay Stand Alone Receiver Pulse/Latch or Delayed Relay Output 318MHz

  • Up to 85 transmitter keys
  • 1 NO relay + 1 NO/NC relay (24VA)
  • Self-learning memorization
  • Standard pulse latched or timed relay output
  • Power requirements: 12/24Vac/dc
  • Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)
    • .......more details
Wireless System Chart
39537R.S

Genie Control Board

  • Replaces any circuit board starting with 37028
  • Does not come with new housing
  • Compatible with models 1022 1024 1042 1026 2022 2024 2042 2026 and 2027
MGH-6214-ECB-LH

Manaras 1 HP 240V 1P Jackshaft with Elect. Circuit Board Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
9004-10

Excalibur Threshold Kit 10'2" x 4" W Solid Aluminum *** Price by Quote Only

  • Stands 1/2" tall
  • Built with 6061-T6 solid aluminum to withstand extreme weight and excessive traffic conditions.
  • Two-way fastening/seal system won’t shift buckle or leak
  • Top V-groove design provides for skid proof protection and improved tire traction on loading docks and incline ramps.
  • The 1/2" diameter wire access port makes it easy for sensor and security installations.
  • The kit comes complete with pre-drilled counter sink holes 3/8" anchors and sealant.
    • .......more details
MK-00519

Micanan Surface Mount Fused Disconnect Modification

  • Mounted to control panel cover in lieu of primary fuse block inside panel
26CW94525-CUT

Truck Door Intermediate Panel (15" x Cut-to-Size) Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
.306-258-L

Cut-to-Length Torsion Spring .306 x 2-5/8" Left Hand Wound Red

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
1003-5"-PER-FT

Bottom U-Rubber 5" Black Sold per Foot

PRO-HBH10021U-R

Micanan 1 HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

  • 1 HP230V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn o/s/c (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
PRO-GHC-10021U-R

Micanan 1 HP 230V 1P Gearhead Operator with N1 Eyes Monitored ECB Right Hand

  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
  • Full function Smart 10.0 logic board and on-board receiver
    • .......more details
Installation manualSpecification sheet
MG020-Y-2E-03

Miller Edge Sensing Edge Yellow 2-Wire End Outlet 3 ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
PROBE-150

EMX CARSENSE-101 Direct Burial Probe with 150' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
MD-00516

Micanan Roller Chain #40 Waterproof 10' Pack

91-00700

Truck Door Elevator Bolt 1/4"- 20 x 1-3/4" 1" head

  • Zinc plated finish
47DCT

LiftMaster Receiver Logic Board Sec+2.0 Non-MyQ

  • 047DCT is a replacement Security+ 2.0® receiver logic board.
  • This replacement board does not feature MyQ® technology.
  • This 315MHz receiver logic board is compatible with various LiftMaster® AC chain drive and belt drive garage door openers; made after 2011.
  • The unit will feature a yellow learn button.
  • Same as 47DCCR1 47DCCC1 47DCCL1 047DCT41D8060 1D8060
SPECIAL-ORDER

Special Order Item

26CW94222-CUT

Truck Door Bottom Panel with Hardware (12" x Cut-To-Size Painted White for Whiting Dryfreight

  • These panels are cut to customer's specifications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes with pull strap two bottom roller shaft covers stud plates standard lift handle seal & retainer
    • .......more details
MD-00189

Micanan Roller Chain Waterproof #41 Sold by the Foot

60-8000-7

In-Tube Motor 110V for Screen Door

  • Replacement motor only
  • This is mainly a special pricing product DBS says that we have to contact them for any future pricing.
SPR50B12X1

Sprocket 50B12 for a 1" Shaft 1/4" keyway

  • ame as MD-00012
5001-14-DK-BROWN

Residential Side & Top Weather-Strip 14' Long Commercial Brown

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
029-98205

W-Style Replacement Door White Stainless Steel Package 029-98205

  • Replacement door size between 98" wide x 105" high
  • Painted white
  • Stainless steel package
1-4-3

Spring Extension Clip Medium-Heavy

MB-05507

Micanan Electric Motor Only 1 HP 230/460V 3PH Base Mount TEFC FR56

31375

Doorlec Coupling Sprocket 50B23

PRO-HBH10011U-L

Micanan 1 HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 1 HP115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn o/s/c (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
.283-334-R

Cut-to-Length Torsion Spring .283 x 3-3/4" Right Hand Wound White

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED