Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
CRBH751L5-RH

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 with Carwash Modification

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
PRO-GH-10053U-R

Micanan 1 HP 575V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

  • Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
  • Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
  • External radio control terminal strip
  • Three button O/C/S control station Nema-1
  • Supplied with Nema-1 photocells
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
K72-12509

LiftMaster Output Shaft Kit (3/4 & 1 HP)

  • For commercial operator model T
  • Complete with: Output Shaft Bearing Roller Chain with Master Link Limit Chain Shim Washers Roll Pins Push Ring 3/4' and Sprockets (41B32 & 48B10)
MGJ-5011U-LH

LiftMaster Medium-Duty Logic Gear-Reduced Op. 1/2 HP 115V 1Ph Left Hand

  • MGJ is designed for use on rolling grilles and shutters.
  • Maximum recommended duty cycle: 12 cycles per hour.
  • Heavy-duty wormgear-in-oil-bath speed reducer
  • 3-button station for open/close/stop functionality
  • 315 MHz radio receiver is integral to the Medium-Duty Logic board
  • UL325-2010 Monitored Entrapment Capability (provides primary monitored entrapment protection through monitored photo sensors: either CPS-U or CPS-UN4 or a 4-wire monitored edge using the CPS-EI interface)
    • .......more details
Installation manualSell sheet
070032-0000

Overhead Double Drive Pulley

MG00019

Micanan Flat Washer 13/16" ID x 1.5 OD (3/4" Shaft Size)

  • PRO-H/HB operator parts
  • 2 required per operator
.375-6-R

Cut-to-Length Torsion Spring .375 x 6" Right Hand Wound Yellow/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.375-6-L

Cut-to-Length Torsion Spring .375 x 6" Left Hand Wound Yellow/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.273-334-R

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Orange/Red

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.312-6-R

Cut-to-Length Torsion Spring .312 x 6" Right Hand Wound Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
1004-134-12'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 12 ft**Actual Length 12'2"***

  • For door thickness 1-3/4"
10-1000-CUSTOM

Strip Curtain PVC Door Custom Made ** Price by Quote Only

MT-2B

Linear 2-btn MegaCode Block Coded Transmitter 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Superior transmission range
  • Operate LED
  • Visor clip included
  • Sold in lots of 10
  • Power: 9-volt battery
    • .......more details
JDMG-LG-A030

GDI Jackshaft 24VDC Nema 4

  • Brushless DC high reliability high efficiency and low maintenance motor
  • No maintenance GearMotor sealed stainless steel bearings no limits switches no belts or no hydraulic cylinders to maintain
  • Soft start soft stop
  • Includes cycle counter timer-to-close 10ft motor wire harness
  • Battery backup optional (sold separately)
Sell sheetTechnical document
M-18

Molded Rubber Bumper Black 18" L x 10" W 4" Projection 2-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • 4-1/2" depth
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles. and will not warp rust rot or harden.
    • .......more details
CHS401-114

Chain Hoist Shaft Mount 1-1/4" Shaft 4:1 JR Torque Force (126685)

  • Shaft Mounted Junior Hoist
  • 4:1 Reduced Drive
  • Sprocket: 41B36. Bore size: 1-1/4" diameter
  • Cross Reference: OMI 4020
  • Requires minimum 3/8" center line offset.
  • Set includes: 26' of hand chain 22" of #41 roller chain Chain keeper (2) shaft collars 1/4" square key and a wall stabilizer bracket.
    • .......more details
Sell sheet
37222R

Genie Series III Deluxe Wall Console

  • 3 function wall console for use with IntelliG™ and TriloG™ openers.
  • Same as GBWC-BX
  • 3 function console operates door opener controls lights and security lock out switch.
  • Not compatible with Series II
8360WLB

LiftMaster 3/4 HP DC Premium Series Chain Drive Wi-Fi Lock with BBU Capability **To extend of inventory

  • Built-In Wi-Fi® for the easiest way to connect the garage.
  • Real-Time Alerts indicate the status of the garage door via email or push notifications.
  • Monitor and Control the opener from anywhere using mobile devices.
  • Consume up to 75% less power in standby mode.
  • Soft Start/Stop for smooth operation.
  • Safeguard your household with Security+ 2.0™-with every click a new code is sent to the Garage Door Opener so the door opens only for you.
    • .......more details
ALUM-431

Aluminum 24" x 100' Spool Bright White / Blanc Pur # 431

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Aluminum on the reverse side
  • Gentek # 431
Colour chart
.343-334-L

Cut-to-Length Torsion Spring .343 x 3-3/4" Left Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
PROROLL4

Cantilever Roller 4" Round Post with Covers Sold as a Pair *** Discontinued

  • 3100 pound rating
  • Integrated polyurethane cover for safety ensuring UL325 compliance
  • Sealed bearings for maintenance-free operations
  • DuPont™ Delrin® injection molded for smooth quiet movement
  • High-precision roller for water resistance and industry's best overall temperature rating
1058050002

Overhead Limit Cam Snap On for OHD Chain Model

  • For Overhead models #456 #551 #556 and the #65 series
  • Also called Limit Actuator
  • 105805-0002
MD-00248

Sprocket 50B28 x 1" 1/4" KW 2SS 5/16"

MB-01003

Micanan Electric Motor Only 1/2HP 110/220V 1PH C-Flange TEFC 56C

  • C-Flange TEFC electric motor
  • Fits models: GT GH GHC & GSD
AOMRON

Omron Heavy-Duty Retro-Reflective Photo Eye 110VAC/24V 40ft Range

  • 24-240 VAC/DC
  • 35mA/125mA at 24VAC
  • 20mA/60mA at 110VAC
  • UL listed to UL325 standards
  • NEMA 3 4 12 Outdoor Rating
  • 40 ft. sensing distance
    • .......more details
K72-13059

LiftMaster Output Shaft Kit APT

  • Kit contains: Shaft Bearings Roll Pins Washers and Sprockets (41B10 x 3/4" & 41B16 x 3/4")
1104-10'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 10' Long - Light Bronze (F). **NLA

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
50030

Doorlec Key Switch with Spring Return in Waterproof Housing

  • Weatherproof start key switch
  • Nema 4 enclosure.
  • Cast aluminum base with tamperproof aluminum cover
  • Rating: 10 amps 124VAC
  • Contacts: Single pole silver alloy momentary contact
  • Two keys supplied with each switch
    • .......more details
54-440

Limit Switch Snap Action Standard Short Hinge Roller Lever S54

  • SPDT
201-300-301-00

Equinoxe Long Range Transmitter O/C/S for 1-Door 433 MHz. Pre-2016

  • Open/Close/Stop remote for 1 door
  • Range of approx. 1000ft
  • A heavy-duty remote for Industrial applications
  • Old generation - prior to 2016
Programming InstructionsInstructions de programmation
12-2125

LiftMaster Flanged Ball Bearing 1-1/4" Bore **to extent of inventory

  • Fits SW490GL swing gate
IRB-RX

EMX Industries Receiver Board Only for IRB-4X *** NLA

XT2563-00-W

Xcluder Rodent Block 3" Black 75' Reel

  • For commercial and residential applications
  • Creates a tough barrier that is virtually impenetrable to rodents
Sell Sheet
.362-278-27-LHW

Cut-to-Length Torsion Spring .362 x 2-7/8 x 27" Left Hand Wound

  • No cones
  • Inside diameter 2-7/8" or 2.875
H12G11-SS

Hinge #11 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
ME123-M-BLK-U

Miller Edge Black Universal 4 -Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
19-48ML-NP

Master Link #48 Nickel Plated

  • For #48 chain
.437-6-R

Cut-to-Length Torsion Spring .437 x 6" Right Hand Wound Red/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
CHD200

Chain Hoist Direct Drive Assembly 200 D

  • Sectional door Direct drive - 1" shaft
  • Requires keyed shaft
  • Includes: 2 shaft collars
  • Fits 3-3/8" min. offset
  • Includes 26' of chain
19-48047MN

LiftMaster Roller Chain #48 x 47 Nickel Plated

  • #48 x 47 pitch with master link
MH00008

Micanan Collar 3/4" ID

  • 2 required per door
ME111-R

Miller Edge Black Right Hand Outlet 7/8" wide x 1-1/2" high Sold by the Foot

  • Slide in style edge for barrier gate and counter shutter application.
  • Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •Temperature Range: -30F to 155F
  • Lead wire: AWM 22 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
  • Vertical or horizontal mount
  • ANSI/UL325 recognized component
    • .......more details
Installation ManualWorksheetSell Sheet
R5205

Saddle Support for 4" Pulley

  • 8 gauge galvanized steel
25-60503

Truck Door T-Style Ramp Handles Curbside (Right)

  • Black plastic construction
  • Cross ref.: 39504-2
.306-6-R

Cut-to-Length Torsion Spring .306 x 6" Right Hand Wound Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
072017.0001.S

Overhead Travel Nut for RCH

  • Teflon travel nut
EXA-2000

Linear Directional Antenna (AAE00331)

  • Compatible with all Linear receivers with Type F antenna connector
  • Receives signals in 288 to 320 MHz range
  • Directional remote antenna designed to enhance the radio range of Linear receivers
  • Includes 10 feet of coax
  • Clamp for mounting
  • Dimensions: 21” W x 5” H x 1.5” D
    • .......more details
10-10875

LiftMaster Disconnect Lever H MH J **to extent of inventory

EQ2722

SkyLink 3/4 HP Garage Door Opener with 2 2-Btn Keychain Remotes ** Discontinued

  • The DC motor offers additional benefits with very quiet operation and much less vibration.
  • It is ideal for garage doors that are below a living room or bedroom.
  • The DC motor also offers the soft start soft stop features which reduces the vibration and wear and tear of all the mechanical parts
  • Features: Rolling Code Technology Soft Start Soft Stop Optimal Force Learnings and Safety Beam Sensors.
  • Available in either Belt or Chain drive
  • Includes two 2-btn keychain remotes # MK318-2
    • .......more details
Installation ManualSell Sheet
1003-4"-PER-FT

Bottom U-Rubber 4" Black Sold per Foot

1001-18-BLACK

Commercial Side & Top Weather-Strip 18' Long - Black

  • Aluminum retainer with black dual-fin vinyl
PRO-HBH-7511R-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft with Mechanical Contactor Left Hand (PRO HHDR)

  • 3/4 HP 115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Electro-Mechanical Control Circuit (non-circuit board model)
  • 3-btn open/stop/close (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • Emergency chain hoist with electrical cut-off for manual operation
    • .......more details
.295-134-R

Cut-to-Length Torsion Spring .295 x 1-3/4" Right Hand Wound Blue

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
26-40039

Truck Door Offset U-Channel Seal Retainer 98" Long for Whiting DryFreight Doors *** Obsolete

  • Aluminum extrusion construction.
  • Retainer is offset to allow header clearence with seal when door is in open position.
  • For use with offset bottom seal #26-40045
DXT-42

Linear 2-Btn 3-Channel Key Ring Transmitter *** Discontinued

  • Battery powered portable miniature transmitter designed for use with Linear’s DX Format receivers.
  • Each transmitter can be used in a limitless number of wireless remote control applications.
  • Pressing a transmitter button sends a digitally coded wireless signal to its companion receiver. The transmitter buttons have a positive click feel.
  • The digital DX code format features over a million possible codes.
  • The DX transmitters are precoded at the factory to unique codes so no field coding is required. Transmitters can send a signal for up to 10 seconds with each button activation.
  • Each button sends a unique code. Pressing both buttons together sends code three. Press button(s) for a minimum of two seconds to insure receiver activation.
    • .......more details
Installation Manual
GH4416-05-L

Green Hinge #5 12-ga Left Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
K001A6039

LiftMaster Control Board for LA400

  • Replaces P/N 127A0071C PN 127A0071F
Installation Manual
10TD433HH1

BEA 1-Button Digital Transmitter 433 MHz

  • Transmitter offering means of activation of automatic doors with extended hold feature.
  • Delay and no-delay learn modes for either instant of delayed activation for sequencing doors.
  • Operating temperature: -10 to 55C
  • Controls one 10RD433 receiver.
15-3619

LiftMaster Sprocket 50B19T 1-1/4" x 1/4" 2-SS

14FW

Rolling Steel 3" Filler Endlock for Continuous

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
SLT-TT

Rolling Steel Thermotite Slat Foam Injected

SLT14-22

Rolling Steel 3" Flat Slat 22-ga Galvanized

SLT17-20P

Rolling Steel 2" Flat Slat 20-ga Primed

SLT4-22

Rolling Steel 3" Crowned Slat 22-ga Galvanized

MOD034

Manaras Monitored Photocell Upgrade N1 to N4

  • Ideal for industrial environments submersible and impact resistant.
  • Flexible design withstands and realigns after mechanical impact.
  • Max. range 45ft.
  • Incl. photoeyes 3ft of conductor wire and mounting hardware.
  • Applies to all operator models with electronic control "M" types.
.363-3-3/4-LH-C

Torsion Spring .363 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .363 ID: 3-3/4" Length: 12 ft
.319-3-3/4-LH-C

Torsion Spring .319 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .319 ID: 3-3/4" Length: 12 ft
.312-5-1/4-LH-C

Torsion Spring .312 x 5-1/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .312 ID: 5-1/4" Length: 12 ft
.312-3-3/4-RH-C

Torsion Spring .312 x 3-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .312 ID: 3-3/4" Length: 12 ft
.306-3-3/4-RH-C

Torsion Spring .306 x 3-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .306 ID: 3-3/4" Length: 12 ft
.306-2-5/8-LH-C

Torsion Spring .306 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .306 ID: 2-5/8" Length: 12 ft
.306-2-5/8-RH-C

Torsion Spring .306 x 2-5/8" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .306 ID: 2-5/8" Length: 12 ft
.295-3-3/4-RH-C

Torsion Spring .295 x 3-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .295 ID: 3-3/4" Length: 12 ft
.295-2-RH-C

Torsion Spring .295 x 2" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .295 ID: 2" Length: 12 ft
.283-3-3/4-LH-C

Torsion Spring .283 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .283 ID: 3-3/4" Length: 12 ft
.283-2-RH-C

Torsion Spring .283 x 2" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .283 ID: 2" Length: 12 ft
.273-2-5/8-LH-C

Torsion Spring .273 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .273 ID: 2-5/8" Length: 12 ft
BOARD066R

Manaras Replacement Power Board ***No Longer Available

  • Used on all Manaras circuit board type operators
Installation ManualManuel d'installationReplacement ChartGuide de remplacement
RBH755L5-LH

LiftMaster 3/4 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 ***NLA

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
Installation ManualManuel d'InstallationSell sheet
CS202S-5-100

EMX Car Sense Vehicle Motion Detector ** Discontinued Offer VMD202 instead

  • Low voltage used for automatically opening gate when exiting property without requiring the use of a remote control transmitter key pad or any other operator control device.
  • Can be located up to 150' from the gate. Senses automobiles on a driveway up to 12' wide moving more than 5 m.p.h.
  • A second probe can be connected in parallel for additional coverage or for automatic opening in or out.
  • Available in a five wire (recommended for use with GTO operators) and a three wire version.
  • The CarSense 202 is buried in the ground so it will not be noticed by a potential intruder or vandals.
  • The CarSense 202 accepts a wide range of power input of 9 - 41 VDC and 6-29 VAC. The low current consumption of 250uA and 12mA detected make the CarSense 202 Slim a great choice for solar applications
    • .......more details
Installation ManualSell Sheet
510.3021.00

Whiting Stainless Steel Exterior Hardware Package with #77 Lock for Dry Freight Door

  • Optional package when a door is ordered. Includes SS rivets and installation.
.331-334-R

Cut-to-Length Torsion Spring .331 x 3-3/4" Right Hand Wound Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
BK302

Jamb bracket J-02 #2 12 gauge

  • Sold by the piece
  • Height 2.50" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
OGH-6436-ECB

Manaras 2 HP 480V 3Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
801-300-002-01

Equinoxe Long Range Receiver 1-Door Industrial Enclosure 433 MHz New Generation

  • 1000 ft range
  • 2016+
  • This receiver will accept 8 Equinoxe O/C/S remotes
  • Nema 4
Programming InstructionsInstructions de programmation
OTBH-6234-1-ECB

Manaras Trolley Operator 1 HP 208V 3 Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation ManualSell Sheet
CLUTCHPAD005

Manaras Clutch Pad 5/8" ID 4" OD

  • Made from commercial grey vulcanized fiber
PPWR

LiftMaster Passport Receiver with Sec+ 2.0 Technology

  • LCD Menu Screen streamlines programming for easy set-up of facility codes and bit format.
  • Compatible with all Standard Wiegand Protocols providing control for the security and access of your property.
  • IP44 Rated Housing designed for outdoor environments.
  • Designed for outdoor environments
  • Can be programmed with 1- and 3-Button remote controls offering a variety of solutions to fit your specific application needs
Installation ManualManuel d'InstallationSell Sheet
MI00002

Micanan Pulley 8" OD c/w Bushing 3/4" ID

AK-21

Linear Interior Digital Keypad***to extent of inventory

  • The keypad is housed in a rugged plastic enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright easy-to-read yellow graphics.
  • It is supplied with four different plastic snap-on mounting bezels to customize the look of the keypad. The satin-chrome bezel comes factory installed on the keypad. The white ivory & bronze bezels are packaged separately.
  • Up to 480 entry codes from 1 to 6 digits in length can be programmed. They can activate either or both of the relay outputs.
  • Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The relays can be set for timed or latch-on/latch-off toggle operation per each individual entry code.
  • The on or off toggle state of a relay is maintained even after power interruption. When power is restored to the keypad each relay will assume the state it was in when power was removed.
Installation Manual
36254R

Genie T-Rail Carriage Assembly

  • This part is listed under several part numbers: 36254R.S 36197A 21784R 20438R
  • For all chain drive openers with steel T-rail assemblies
  • Must be installed with inner slide part # 25605R
33950S

Genie Down Limit Switch Assembly 138 " Wire

  • Magnetic limit switch for down direction.
  • The limit wire is moulded into the limit.
  • For Genie Excelerator Screw Drive garage door opener models: PRO99-IC CMD9900-IC ISD990-1 ISD990-2 ISD1000-2
797

Fasteners Clevis Pin 5/16" x 1" 100/Bag

18007

Doorlec Reducer BHC-63 5/8' or 7/8" Input

  • Gearbox for GH operator
APOW3

LiftMaster Transformer 120V input 34VDC output

  • Plug-in AC/DC converter
  • Used as a replacement transformer for all LA400 models
MA031

LiftMaster Adapter Collars 2/Pkg

  • For use with Mega-Arm padded arm
ME00007

Micanan Jackshaft Drive Shaft 1" x 15" L c/w KW

  • 2 required per machine
  • Sold individually
  • 1" x 15" long
.343-6-L

Cut-to-Length Torsion Spring .343 x 6" Left Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
029C98200-PRIMR

W-Style Complete Repl. Door Primer only

  • Primer only no stainless steel package.
  • For doors upto 98" wide x 100" h
  • Fully assembled door manufactured to exact size with all tracking and spring operator assembly
  • Price varies according to size
75-10174

LiftMaster Trolley- Front Idler Assembly

  • Also known as: 7510174 305115018 711150181 175017 71115211 75-10174