Devanco Canada - Get The Right Garage Door Opener‎ and Parts

7232

Whiting Spring Spacer 38-1/4" Long for 2-5/8" ID Spring Wire

For use with #7176 balancer

26CW942255-CUT

Truck Door Bottom Panel with Hardware (15.5" x Cut-To-Size Painted White for Whiting Dryfreight

These panels are cut to customer's specifications
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes with pull strap two bottom roller shaft covers stud plates standard lift handle seal & retainer

.......more details

SSZP16-6-114

Solid Shaft 1-1/4" Keyed Zinc Plated 16'-6"

SS-1-1/4-24

Solid Shaft 1-1/4" Keyed 24 ft Zinc ** To Extent of Inventory

Maximum length for a solid shaft is 24ft
Actual length is approx. 24'-1"

K20-1100C-2LP

LiftMaster Electric Motor 1 HP 115/230V 1Ph Logic *** To Extent of Inventory

MP00055

Micanan Track and #410 (#48) Chain for 10' h Door *Actual length 150"*

For 1/3 & 1/2 HP Micanan trolley operators

PRO-TB-7583-U

Micanan 3/4HP 208V 3 P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-GH-7511U-L

Micanan 3/4HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

MU-00005

Micanan Hand Crank Handle 6' Long

For hand crank operation in lieu of hand chain and pocket wheel

26140

Doorlec Cam Shaft Threaded 5/8" x 10-3/4"-24

This limit shaft will work on all Side-Mount Doorlec Openers
Cam shaft 5/8" (1.59 cm) - 24 x 10 3/4" (9.5 cm) fine thread

MT22-MON-Y-RH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Yellow Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

MU22-2WIRE-LH-G

Miller Edge MU22 2-Wire Left Hand Gray - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

PRO-4X_MOD

Micanan Nema 4X Modification 1/2HP- 2HP 3-Phase

This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
For options M & U Micanan N-4X photocells are supplied
1/2HP to 2HP Motors

34201

Doorlec V-belt Pulley MA20 2" x 5/8" bore

SG-13-NC

Telco Light Curtain with Rectifier Normally Closed 72" (13-193-028-D1-E-H59C-5) ***No Longer Available

Normally Closed
SGR13-193-028-D1-E-HS9-5
SGT13-193-028-D1-E-01-15
1928mm housing 1800mm active height 28 channels NC relay output 15m cable

Specification sheet Wiring diagram

.312-6-R

Cut-to-Length Torsion Spring .312 x 6" Right Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

9150000626

3/32" Stops ONLY 100/pkg

Stops only 100 per pack

K32-10540

LiftMaster Gear Reducer 20:1 SL595

Same as 32-10540 32-55011 32-5501-1 G3255011

1005-2-14

Aluminum Bottom Retainer U-Shaped 14' Long**Actual Length 14'2"***

For door thickness 2"

GT751L5

LiftMaster Heavy Industrial-Duty Trolley Op. 3/4 HP 115V

Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
GT operators are directly attached to drive and control the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
High-starting torque continuous duty motor with overload protection
Door speed approx. 11-12 inches per second

.......more details

Installation manual Manuel d'installation Sell sheet Brochure

225-120R

Electraray Rotating Warning Light Red 120V

Incandescent warning light
90 flashes per minute
Operating temp. 31 to 150 degrees fahrenheit
Height: 7-1/4" Diameter: 5-1/2"
Enclosure rating: Nema4X

V1104-BLACK

Replacement Vinyl Only for 1104-Black 200ft Roll

Sold in 200 ft rolls only

990TP626

Trim for Panic Bar 98EO626

Trim for Panic Bar - 98EO626

98EO626

Panic Bar for Pedestrian Door- Exit Only

Panic Bar for exit only

G108019

LiftMaster Arm Clamp PVC

Used in connection with arm # G651209P

25-60007

Truck Door W-Style End Hinge Pin Package Set 50/Pkg

Pin packaged set consists of 50 x 1/4" pins only
Steel construction Zinc plated

MD-00278

Micanan Roller Chain Nickel Plated #410 Sold by the Foot

41A6298

LiftMaster Hardware Installation Bag for 3800

.218-3-144-LH

Torsion Spring Mini Storage .218 x 3" x 12ft Left Hand

.312-334-L

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

K10-30699-1

LiftMaster Chain Cover Mounting Bracket. Cover not included

or cover use part # 41-0259-000

D-2-6

Keyed Disconnect Device 6ft Cable

Operated from the outside to disconnect the trolley for manual operation of the door
Must specify if keyed alike is required or keyed random will be shipped
Mounting plate dimensions: 2 1/2” x 1 3/32”

TRACK-SET-2LHR-R

2" Tracks Set 7'-0" Low Headroom 1-3/4" Door Clips for Wood Frame R12 Torsion Rear

Complete set - torsion rear

5001-14-BLACK

Residential Side & Top Weather-Strip 14' Long - Black

PVC wrapped
Painted aluminum retainer
Dual fin vinyl

BCH751L5-RH

LiftMaster Hoist Op. with Carwash Mod. and Brake 3/4 HP 115/230 VAC Logic 5 Right Hand ***Replaced by CRBH751L5-RH

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with either CPS-UN4
Brake installed on operator

Installation manual Manuel d'installation Sell sheet Brochure

BL-14

Barlock Kit Complete for 14ft Wide Door Kit includes hardware bag

Kit includes hardware bag and bars (85-1/2")

Assembly Manual

BL-08

Barlock Kit Complete for 8ft Wide Door Kit includes hardware bag

Kit includes hardware bag and bars (49-1/2")

Assembly Manual

PRO-LH-5011R-LH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft with Contactor Left Hand (PRO LHR)

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
No longer available in contactor model (2017)

Installation manual Specification sheet

PRO-LH-5011R-RH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft with Contactor Right Hand (PRO LHR)

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
No longer available in contactor model (2017)

Installation manual Specification sheet

K75-34791

LiftMaster Clutch Kit for SL585

Kit includes: Clutch disk Clutch plate Torque Limiter Hub Sprocket Washer E-Rings Nut Bearings and Compression spring

SLC-221

Linear Commercial Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included

Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
Continuous-tone entrapment alarm with reset button
LED diagnostic display for ease of setup and troubleshooting
Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
Regulated 24 Volt DC power available for access control accessories
Integrated maximum run and auto close timer (0-9 minutes)

.......more details

41AC150-1M

LiftMaster Electronic Circuit Board Assembly 315 MHz *** NLA Repl by 41AC050-1M

For Sears / Craftsman garage door opener

LVB1020-11

Laminated Bumper Black 10" Projection Vertical Installation 20" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

GAREX-READY

Garex Ready to Install Door Special Order

specify size color details when ordering
Please call for pricing

5001-10-BLACK

Residential Side & Top Weather-Strip 10' Long - Black

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

MK-00697

Micanan Fraba FOS-1 Exterior Thru-Beam Photocell Nema 4 / 4X 45ft Range

Exterior Through-Beam Photocell
Sensing Distance 45 Feet
UL325/2010 Recognized Component
Comes with Sender Receiver and Brackets
NEMA 4 & 4X

Installation manual

PRO-HB-7511U-RH

Micanan 3/4HP 115V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

Installation manual Specification sheet

1104-10FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 10' Long - Bronze (F)

Bronze rigid vinyl retainer with bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

053158

Rotating Beacon 4" Amber 12-110V DC

IP Protection: IP56
-30 degree celsius to + 50 degree celsius extreme temperature reliability
small format only 2.5" wide

TBKL-14X4

Turnbuckle Loop Ends 1/4 x 4" 500 lbs

Hot dipped galvanized drop forged with lock ends
Eye & Eye ends
Work Load Limit : 500 LBS

L-4-18-0-M

Cable Tie Standard 18 LB Black 4" Nylon 1000/pkg

Length: 4.12" / Width: .095" / Thickness: .042" / Diameter: .875"
Low insertion and pull through force
Advanced pawl and teeth design
Angled tail provides quicker initial insertion alignment
Tail finger grips allow easier handling and tightening
Rounded edges provide added safety and eliminate insulation damage

.......more details

27-20010

Truck Door Dual-Spring Shaft 96" for Whiting Roll-Up Doors

Constructed of 1" outside diameter heavy-duty steel tubing
Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
Cross Reference: W #2528

PBTL-3

Exterior 3-Btn O/C/S Control Station with Key Lockout Nema 4

Surface mount
Metal enclosure
Dimensions: 7" H x 2-3/4" W x 3-1/2" D

Sell sheet

CL-74-RH

Wayne Dalton Complete Replacement Barrel Assembly 4.5" Diameter 74" Long

Replacement for serial # 10093517-1 PIPESM

BK020/PR-BOLT

Commercial 2" Safety Bottom Bracket with Bolt Sold as a Pair

Maximum cable diameter: 3/16"
Maximum door weight: 1300 lbs Zinc
Plated Steel
Sold as a pair

Installation manual

AK-11-KEY

Linear Key (1) only for AK-11 (2200-884)

Replacement Key ONLY qty: 1 only

1003-3-DF-CUT

Bottom U-Rubber 3" Dual Fin Black Sold per Foot

Sold in cut-lengths per foot.
Dual fin

C16-32FHD

Bearing 1" x 2" Press Fit Heavy-Duty

Flanged ball solid steel bearing
Rating: 1 000 000 revolutions
Axial load: 150lb max
Radial load: 900lb max

28020020-500

Cable Stainless 5/16" 1x19 500' Inox ** Price on Request

Not for use in aircraft applications
1x19 contruction type 302 / 304

Comparison charts

28020024-500

Cable Stainless 3/8" 1x19 500' Inox ** Price on request

Not for use in aircraft applications
1x19 contruction type 302 / 304

Comparison charts

V3564-00-W-200

Vinyl Seal 4" Bottom Bead End Grey 200' Spool

Bead diameter 3/16" - 7/32" +/- tolerance

V3563-00-W-200

Vinyl Seal 3" Bottom Bead End 198" Bead Grey 200' Spool

Bead diameter 3/16"-7/32" +/- tolerance

16-4L290

LiftMaster Cogged Vbelt 4L 29"

1003-4-DF-200FT

Bottom U-Rubber 4" Dual Fin Black 200' Long

200ft spool of vinyl insert.
Dual fin

C-600-114-INSTL

Cones 6" 1-1/4" bore Factory Installed (Pair)

For do-it-yourself installation use part no. SF600-114

19-5118-NP

LiftMaster Trolley Roller Chain Pack #41 for 18ft Door Nickel Plated

For 3/4 & 1 HP trolley operators

7019195

FAAC 400 Screw Long Carte

K20-1050C-2T

LiftMaster Electric Motor 1/2 HP 230V 1 ph CF

For gate op. SL580-5011

PHOTO-062

Manaras Monitored Photoelectric Cells N1 Thru-Beam 20' Range ** NLA use PHOTO-070

Monitored NEMA 1 enclosure through-beam type photocell
4-Wire
Indoor
Range: 20 ft

65-52091-16

LiftMaster Manual Hoist Mod. M8 #41 Chain for 16ft High Door

For 3/4 Hp & 1 Hp Trolley operators
Includes floor level brake release cable 1" x 12' round bar.

MD00045

Micanan Spur Gear 12B72-1

S142BRNN924

Carlo Gavazzi Amplifier 24V

Processor controlled amplifier for one set of photoelectric sensors type MOFTR.
11-pin circular plug for easy connection.
8A SPDT relay output NPN/ PNP transistor output or alarm output.
Diagnostics for sensor test during operation.
Alignment help via LED or alternation of alarm output.
Level indication for dirt accumulation.

.......more details

101475

Insert Bearing 1-1/4" Bore SB206-20

Works with Flangette Retainer 102079

MUSHROOM-PB

Lockable Mushroom Push Button with 1 NC Contact

N/C Contact "Stop"
Push to Stop Turn to Unlock
NEMA 4 Enclosure

50ACTWF

LiftMaster Receiver Logic Board AC WiFi*** Discontinued and replaced by the 050ACTBMC

This is a 315MHz Security+ 2.0® Receiver Logic Board featuring Wi-Fi with MyQ® technology.
For use with various LiftMaster® and Chamberlain® AC Chain or Belt Drive Garage Door Openers; manufactured after 2011.
The unit will feature a yellow learn button
Also known as: 1D8088-1 045ACTWF 1D8808-3 041D8088 50ACCL5
Same as 050ACTWF
1 Year Warranty

.......more details

K72-33192

LiftMaster Limit Shaft Kit NEMA 4 & 4X for H J HJ GH GT T & APT Operators

For: NEMA 4 & 4X for H J HJ GH GT T & APT Operators
Shaft measures 12" in length
Compatible with Logic 4 and Logic 5 operators

MC00012

Micanan Gear Reducer PRO-GOHD BHC 63 40:1 56C

CP-BRG-58

Lynx Bearing 5/8"

6 in total on a MCJH

20456R

Genie Pulley Support Kit *** No Longer Available

Front metal clip with pulley
Front idler for use with Genie and Overhead Door T-rail systems

MHN-SET-100

Magnetic House Number Set 5" Black Embossed 100 pcs

Flexible magnetic material with an embossed finish
100 piece contains ten each of numbers 0-9
Priced per box

DF104.2

Whiting Dry Freight Door 3/4" with Track Balancer and Standard Hardware

Standard features include: 2-cable balancer with independent springs
Balancer springs treated with rust preventative
All door hardware is E-coated
Spring loaded lock catch
Heavy-duty 2" 13-gauge track
Stainless steel aircraft cables

.......more details

MALEDCW

LiftMaster Counterweight for 17ft LED Arm

For use with MALED17 17 ft. LED Arm for MA/MAT

MV00021

Swivel Type Pull Cord - SPST Nema 4

Data sheet

1003-4"-PER-FT

Bottom U-Rubber 4" Black Sold per Foot

26-942255

Truck Door Bottom Panel with Hardware (15.5" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Primer Finish
Comes with 18" pull strap assembly two bottom roller shaft covers and stud plates standard lift handle two u-bolts flexible PVC bottom seal and aluminum seal retainer.

.......more details

.250-258-R

Cut-to-Length Torsion Spring .250 x 2-5/8" Right Hand Wound Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

K20-1050B-2P

LiftMaster Electric Motor 1/2 HP 115/230V 1P Base Mount

Replacement motor for BG770 BG790
Same as 20-1050B-2

MK-00157

Micanan Intrinsically Safe Modification (Safepack)

Modification available for add-on to certain models only

CPT-210-50

Miller Edge Bulk Extrusion 50 ft Roll

For do-it-yourself edges on sectional or rolling doors.
Black
End plugs adhesive and mounting channel sold separately.
Sensing edge size: 1-5/8"H x 1-3/4"W
When combined with the ME123 mounting channel it can be installed on doors measuring 1-1/2" to 2" thick.