Devanco Canada - Get The Right Garage Door Opener‎ and Parts

5464.96

Whiting Top Seal Coldsaver 96" L 2-3/16" W

G65_18300

LiftMaster Thermostat Control Heater Fin Type for 115V & 575V Gate Operators

Heater used in BG type gate operators

Installation Manual

BK110/PR

Light Duty End Bearing Plate 3-3/8" with Bearing - EBF 338 Residential Sold as a Pair - LH/RH

With C16-32F bearing
Galvanized steel
3-3/8" shaft offset
Flange allows plate to be bolted to the wall for additional support
Same as part number 209

302850

Linear 2-Channel Multi-Code 12-24V Gate Receiver 300 MHz / 310 MHz

The Model 302850 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency.
The 300 MHz frequency is compatible with standard Multi-Code transmitters
The 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.
Operates on 12-24 volts AC or DC power
Two channels
Whip antenna

.......more details

Programming Instructions

27-20004

Truck Door Dual-Spring Shaft 93" for Whiting Roll-Up Doors

Constructed of 1" outside diameter heavy-duty steel tubing
Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
Cross Reference: W #2528

10-10355

LiftMaster Solenoid Link

TUBE_SHAFT_9FT

Hollow Shaft 1" x 9'-10" Galvanized 16 gauge

TUBE_SHAFT_8FT

Hollow Shaft 1" x 8'-10" Galvanized 16 gauge

883LM

LiftMaster Door Control Bell Button for Sec+ 2.0 (Use 883LMW)

Controls garage door operation and opener lights
Easy and fast programming
Compatible with Security+ 2.0 and MyQ remotes and accessories

Installation Manual Manuel d'Installation

.225-258-L

Cut-to-Length Torsion Spring .225 x 2-5/8" Left Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.295-2-R

Cut-to-Length Torsion Spring .295 x 2" Right Hand Wound Blue

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.234-2-R

Cut-to-Length Torsion Spring .234 x 2" Right Hand Wound Blue/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.225-2-R

Cut-to-Length Torsion Spring .225 x 2" Right Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

C-258-INSTALLED

Cones 2-5/8" Factory Installed (Pair)

For do-it-yourself installation use part no. SF258

CR2450

Maxcell/Renata 3V Lithium Button Cell

ME123-YELLOW-LH

Miller Edge Yellow Left Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

ME123-YELLOW-RH

Miller Edge Yellow Right Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

TUBE_SHAFT_10FT

Hollow Shaft 1" x 10'-10" Galvanized 16 gauge

When ordering order one foot longer that actual door width

.283_3-3/4"-LH

Torsion Spring .283 x 3-3/4" x 12ft LH White

Wire size: .283
Inside diameter: 3-3/4"
Length: 12 ft

41A4252-6G

LiftMaster Circuit Board Assembly ** Discontinued

Assembly includes: circuit board end panel and light socket
Also includes: 1 Multi-Function wall control panel - 2 wire
For chain drive units with two lights
Fits 1250 1260 1270 1280 220WD 320WD 5100 7200 & 8100

41AC050-1M

LiftMaster Electronic Circuit Board Assembly

Assembly includes: circuit board end panel and light socket
For chain drive units with one light
Fits 3245 & 3255
Also known as 41AC050-1 041AC050-1M

4A1344

LiftMaster Light Socket Plastic (41C279)

41A5483-1C

LiftMaster Circuit Board Assembly *** Discontinued

Assembly includes: Circuit board and end panel
For chain drive units with one light
Fits models 2245 & 2255
Last letter of the part # indicates revision date the most recent product will be sent out
Also known as 41A5483-1 41A5483-1B

41A4916

Gel Wire Connectors 19 to 26 AWG 100/ box

CAM005

Manaras Limit Cam 5/8-18 UNF

Limit cam for Mountshaft009
2 cam's required per shaft

19-40ML

Master Link #40

For #40 chain
ANSI Standard Carbon Steel

.437_5-1/4"-RH

Torsion Spring .437 x 5-1/4" x 12ft RH Red/Green

Wire size: .437
Inside diameter: 5-1/4"
Length: 12 ft

.295_3-3/4"-RH

Torsion Spring .295 x 3-3/4" x 12ft RH Blue

Wire size: .295
Inside diameter: 3-3/4"
Length: 12 ft

.234_2"-RH

Torsion Spring .234 x 2" x 12ft RH Blue/White

Wire size: .234
Inside diameter: 2"
Length: 12 ft

25-60652

Truck Door Reefer Bottom Roller Bracket Assembly for Whiting Style Doors ** To Extent of Inventory

Steel construction Black E-coat finish
Consist of roller clamp wear plate stud plate and 5/16" lock nuts
Stainless steel studs and nuts
Cross ref: 5600

13-10024

LiftMaster Limit Nut

Limit nut / cam for commercial door and gate operators

17335

Doorlec DC-3100T 4-btn O/C/S Compact Transmitter 301 MHz

3 buttons for O/C/S and 1 button for turning lights ON/OFF
Includes 12V battery
Dimensions: 3-1/4" l x 1.5" w x 1/2" thick

17311

Doorlec AT1035D 1-btn Mini Transmitter 313 MHz ** To extent of inventory

One block of 10 dip-switches for programming
Compatible with Doorlec 17307 receiver (DC-3000R)
Includes 12V battery (GP23A)

CP-BRAKE-ASSBLY

Lynx Brake Shoe Assembly

Brake shoes for all Lynx operators
Assembly includes the shoes
release spring and bolt included

PL-A03-OLD-BRD

Lynx Replacement Logic Board Old Version ** This item is no longer available (NLA) **

Old version board works on operators with a blue cover
Replacement logic board for Napoleon/Lynx Proline garage door opener
For openers built before 2008
This board has a transformer (the new board does not)

PL-A03-NEW-BRD

Lynx Replacement Logic Board New Version

New version board works on operators with a red cover
Replacement logic board for Napoleon/Lynx Proline garage door opener
For openers built June 2008 or later (date code 0806 or newer)
This board does not have a transformer.

BK002

Residential Top Bracket Low Headroom Sold Individually

Bright zinc plated 10-gauge steel
3/8" roller offset

H14G03

Hinge #3 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#3 position
Use between sections 3 and 4
Same as part number 243

.......more details

CONTACTOR044

Manaras Schneider Reversing Contactor 12A-24VAC

Reversing contactor with 24V coil
Same as part # LC2K12107B7
Demensions: 3.5" long x 2.25" wide x 2.25" high
Use 03-8024K as possible replacement

TRANSF088

Manaras Transformer 480-24V 40VA

Transformer 480V Primary 24V Secondary 40VA

TRANSF142

Manaras Transformer 575-24V 40VA

Transformer 575V Primary 24V Secondary 40VA

RADIO-EM103SD

Manaras 3-btn transmitter configured as O/C/S 1 door Rolling Code 390 MHz

Open/Close/Stop remote for 1 door
Operates single door: O/C/S configuration
LED indicator CR2032 battery and visor clip included
Field Selectable: Jumper inside the remote can be positioned to Single Door (SD) or Multiple Door (MD)
Compatible with Manaras operators manufactured after August 2013 with control board070E & board070M.

Manual

RADIO-47

Manaras MCT-1 3-btn O/C/S transmitter 1 door **Replaced by RADIO-EM932

Open/Close/Stop remote for 1 door
Comes with LED battery life indicator
9V battery included
Can be wall or post mounted
Must be used with MCR series receivers

Programming Instructions

CABLE-15

Manaras 15ft coax cable extension with BNC connectors

Used on Radio-15 to extend antenna

7145.96

Whiting Bottom Seal For Coldsaver 96" long

Aluminum retainer sold separately

219109

Capacitor 1/3 HP 43-53 MFD 250V

For LDO33 only

4009-12FT

Aluminum Retainer only for Light Brush 12' Long Reverse Angle

For reverse angle rolling steel doors.
For use with Light Brush or Vinyl Insert.

4004-8FT

Aluminum Retainer only for Heavy Brush 8' Long 45 degree

For angle application (45 degree)
For use with Heavy Brush

4004-16FT

Aluminum Retainer only for Heavy Brush 16' Long 45 degree

For angle application (45 degree)
For use with Heavy Brush

1003-5"-150FT

Bottom U-Rubber 5" Black 150' Long

150ft spool of vinyl insert.

1006-2-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

Black with flexible fin to touch door face.
For door thickness 2"

1006-1-1/2-24'

Rigid Vinyl Bottom Retainer U-Shaped 24' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

1003-2-12'

Aluminum Bottom Retainer L-Shaped 12' Long

For 2" thick doors.

HSC-600

Hand Swager 1/16" - 3/16"

Swages 1/16" 3/32" 1/8" 5/32" or 3/16"
Tool length is 25-1/2"
Wire rope cutting capacity 3/16”
Made in Japan

25-42-270

Extension Spring 7' Door - 270 lbs Orange ** check for availability

Double - Loop
25" long 42" stretch 270 lb load
Sold individually

Spec Sheet

25-42-60

Extension Spring 7' Door - 60 lbs Brown

Double - Loop
25" long 42" stretch 60 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

95-00116

Truck Door Rivet 1-1/4" Stainless Steel ** To Extent of Inventoy

Stainless steel construction
Round head design
Cross Reference: T #89217-0040

27-20301

Truck Door Cable Drum Curbside (RH) for Todco Roll-Up Doors

Cast aluminum construction
Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines left or right drum.
Holds up to 130" door cable
Cross Reference: T #59033-1 T #59129-1 W #4013 330100

26-40400

Truck Door Dual Durometer Side Seal 5/16" Track Spacing 114" Long for Whiting Dryfreight Doors

Allows for easy door operation.
Seal protects cargo area from dirt and moisture
Will not bunch up as bottom panel goes around top curve.
Co-extruded using rigid PVC backing with flexible PVC seal against the door.
For use with right angle vertical track
Fits only right angle vertical track assembly.

.......more details

26-40200

Truck Door Head Seal Only 96" Long for Roll-Up Doors

Seal molded from long lasting rubber
Cross Reference: T #69718 630300

26-14525

Truck Door Intermediate Panel (15" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

HD3076

Lift Handle Roll Grip Round Zinc Plated 5-1/2"-5-3/4"

Measures 7" from end to end
Measures 5.5" from eyelet to eyelet

26-14325

Truck Door Bottom Panel with Seal (15" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish
Comes only with bottom retainer and seal (installed)

25E10311

Truck Door Heavy- Duty Lift Handle Black E-coat finish

Wide grip design
Black E-coat finish
Works with both Whiting and Todco Doors

25E10003

Truck Door Roller Cover for End Hinge Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Cross Reference: W #1208 T #70161

DM28VL-125

Cable Drum Vertical Lift 28' 1350-28 (1-1/4") Pair

28' Vertical Lift aluminum die cast alloy for 1-1/4" shaft.
3/8"-16 x2" hardened cup point set screws installed with red heads. -
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
Max. Door Height: 28'-1".
Rated Lift per Drum: 1100 lbs.
Max. Cable Diameter: 1/4".

.......more details

DM413

Cable Drum Standard Lift 12' 400-12 Pair

12 ft Standard lift cable drum. Aluminum die cast alloy.
Max. door height: 12'-1".
Rated lift per drum: 375 lbs.
Max. cable diameter: 5/32".
Mounting: 1" tube or solid shaft with 1/4" keyway.
Cross references: D400-144 DNS 4-13 OMI 2100. 3/8"-16 x 2" hardened cup point set screws installed with red heads. Color coded (red=LH black=RH)

.......more details

EP2983

Exhaust Port 4" non latching long barrel *** Indefinate Delivery

Inside diameter: 4"
Outide diameter: 4-3/8"
Sleeve: 2" (non latching)
Flange: 6"
Includes fasteners & gaskets.
Polished aluminum finish.

.......more details

R5210

Pulley 4" Zinc Plated Steel with Sheave Strap

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/4"
Hardened inner race
Includes fork

S-HOOK_LARGE

S Hook 1/4" x 2" Large

HD3130

End Stile Latch 7-1/2" Lockbar Length

Lockbar Length: 7-1/2"
Throw: 2-1/8" Use with: Lockbar or End Stile
Centerline Distance (key spindle to handle shaft): 2-3/4".
Handle in Bright Chrome Finish Latch in Bright Zinc Plated steel.

25-10300

Truck Door Cable Anchor Bracket Zinc

Steel construction Zinc plated finish
Allows proper rotation of cable head
Cross Reference: T #61204 W #4004 240000

25-10311

Truck Door Heavy-Duty Lift Handle Zinc

Heavy-duty wide grip design
Zinc plated finish
Cross Reference: T #61401 W #1715 250000

23-10041

LiftMaster Limit Switch Commercial

Will work on LiftMaster and Micanan operators

1104-9FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 9' Long - White (W)

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with cap to hide screws.

CGH503L5-RH

LiftMaster Gearhead with Brake & Carwash Mod 1/2HP 208/230/460V 3P L5 Right Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

797

Fasteners Clevis Pin 5/16" x 1" 100/Bag

.343-2-5/8-RH-C

Torsion Spring .343 x 2-5/8" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .343 ID: 2-5/8" Length: 12 ft

.250_2-5/8"-RH

Torsion Spring .250 x 2-5/8" x 12ft RH Green

Wire size: .250
Inside diameter: 2-5/8"
Length: 12 ft

.225-2-R-C

Cut-to-Length Torsion Spring .225 x 2" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

BRAKEPART018

Manaras Brake Shoe Assembly Kit

Kit includes SHOE001 & SHOE002 for old brake system.
Fits all Manaras operators except gear head made prior to 1999.

Drawing

K23-19380

LiftMaster Reset Switch for LA400

3AG2

Miniature Fast Acting Glass Fuse 2 Amp 250V (5/pkg) - 766122

6 x 30mm miniature fast acting glass fuse
Rated voltage: 250V
Rated current:2A
ROHS compliant

MD00422

Micanan Lovejoy Rubber 3JE Sleeve

BK028/PR

Commercial Light Duty Bottom Bracket 2" Track 13-g BB-90 Sold as a Pair

For 2" track with 7/16" diameter stem rollers
Milford pin cable attachment
For 1-3/4" doors
Size: 8" tall x 3" wide
Includes 1 left and 1 right hand bracket
BB-90 MPL

.......more details

7470.093

Whiting Side Seal for Insulated Doors 93" Long

Fits Coldsaver and Tempguard

1005-1-1/2-8'

Aluminum Bottom Retainer U-Shaped 8' Long

For door thickness 1-1/2"

1003-1-5/8-8'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

CT751L5

LiftMaster 3/4HP 115/230 Volt 1Ph Com. Trolley Operator with Carwash Mod

New Logic 5
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
MyQ Mobile App is a free download with no annual activation fee.

.......more details

Installation manual Manuel d'installation Sell sheet Brochure

SD105L5-RH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 575V 3PH Right Hand (Must include hardware box)

Perfect for split and sliding doors involved with industrial applications.
It is installed above the door and corresponds with the direction the door will be traveling.
Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
Built In Security+ 2.0 radio receiver
Solenoid brake included

.......more details

7001-12-BLACK

Commercial Side & Top Weather-Strip 12' Long - Black (Code B)

Black galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

T-50-H

FL-Heddolf 1-btn Transmitter ID220-1KA-311 MHz ** Discontinued

Keystone-Heddolf single button FL T-50 compatible remote
9 dip switch format
9V battery and metal clip included

4006-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

7001-WG-10-MO

Residential Wood Grain Side & Top W/S Medium Oak 10' Long - Painted Screws to Match

Medium Oak retainer with Medium Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

MD-00006

Sprocket 41B10 x 3/4" NO KW 2SS 1/4

11-10705

LiftMaster Output Shaft MH

LB612-24SF

Steel Faced Laminated Bumper Black 12" x 24" 6" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details