Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
GT operators are directly attached to drive and control the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
High-starting torque continuous duty motor with overload protection
The Loop Replacement System (LRS) features advanced 3-axis magnetoresistive sensing technology that responds to changes in the Earth’s magnetic field caused by ferrous objects.
Three sensing elements provide measurements in the X Y and Z axes to improve detection sensitivity when used in either above or below ground installations.
The LRS is equipped with our new DETECT-ON-STOP™ or (DOS®) feature which allows detection only when a vehicle has come to a complete stop.
This is installed onto the panel when the door is opened it is engaged and will keep the door open above the header so there is no hang down of the door.
The door will stay open above the header to eliminated the door being damaged.
This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
It has been designed to fit most doors with double track bottom retainers.
With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
The MAW123 is resistant to flame water and most common greases and oils.
The Nice Apollo PS224 is a battery back-up for the L-Bar and M-Bar Barrier Gate Operators allowing the gate opener to use it's no blackout feature so you can have emergency power when the power goes out
The Apollo XBA4 is a 13.1 ft long line of indicator lights for the click fixture on the upper or lower side of the barrier arm of the M3BAR and M5BAR barrier gate openers.
Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates.
•3-sided activation allows for immediate stopping or reversing of motion
•Contours to round or square posts.
•Temperature range: -30F to 155F
•Lead wire: 18 gauge 2ft length
•Sensitivity: nominal 6-8 PSI
•2 wrie NO configuration
•ANSI/UL325 recognized component
•Cannot be bent
•One year warranty
Non-monitored edge
Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)
A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
Main pieces may be added and connected to form larger units.
36” long x 10.5” wide x 2” high (main piece)
EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.
Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.