Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
DTG

Linear Delta3 Safety Edge Transmitter 310 MHz

  • Activates one Delta-3 receiver for remote stop or reverse safety edge
  • No cables or coiled wires
  • Mounting screws (4) supplied
  • Power: 9-volt battery
  • Codes: 256 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
DTKP

Linear Delta-3 Wireless Keyless Entry 310 MHz

  • Activates multiple Delta-3 receivers
  • 1-8 digit PIN
  • Backlit keys for easy viewing
  • Mounting hardware supplied
  • Power: 9-volt battery
  • Codes: 256
    • .......more details
Programming instructions
DW-3S-200

Fraba Air Wave Switch Small Housing NOC

  • Fraba DW3S-200 air switch
  • Normally Open Contact (NOC)
  • Small Housing does not come with copper end
  • Screw Type Connector
  • Housing dimensions: 101x48.5x48 mm (3.97x1.91x1.89 '')
  • Housing: ABS Switch: PA6V0
    • .......more details
Operating Instructions
DW-3S-300

Fraba Air Wave Switch Larger Housing with Copper End NOC

  • Fraba DW3S-300 air switch 10008797-2
  • Normally Open Contact (NOC)
  • Screw Type Connector
  • Dimensions: 158x60x39 mm (6.22" x 2.36" x 1.54 '')
  • Housing: ABS Switch: PA6V0 Nema4
  • Normally Closed Contact achieved by adjusting the sensitivity screw
    • .......more details
Operating Instructions
DW-HOSE-CONN

Copper Air Hose Connector 3 x 22mm with Collar *** To Extent of Inventory

  • For use in DW-3S and DW-TR air switches
DW-RS-200

Fraba Wireless Air Wave Switch Transmitter/Receiver Kit NOC/NCC

  • The small radio transmitter unit and the pneumatic switch are packaged within the DW3S-200 case while the receiver is built into a Nema 4 case
  • It is equipped with a NC or a NO relay
  • Kit includes radio transmitter DWTR-200 433 Mhz and receiver RSW-R 433 Mhz
  • Battery is included # CR2032
Operating Instructions
DW-TR-200

Fraba Wireless Air Wave Switch Transmitter Only

  • Includes transmitter DWTR-200 433 Mhz only
  • A small radio transmitter and the pneumatic switch are packaged within the DW3S-200 case does not come with copper end
  • Comes with battery (CR2)
Operating Instructions
DWGK11

Bircher Air-Wave Switch DW40 with N4 Enclosure

  • Bircher pressure wave switch with connection terminals
  • 6.3mm plug tab in impact-resistant plastic housing
  • For pressure wave switch series D1 grey housing bottom.
  • A pressure wave generated by pressing the sensing edge reaches the pressure wave switch.
  • The membrane deflects and the electric contact switches.
  • The electric contact remains switched as long as the input pressure is above the response pressure.
    • .......more details
Manual
DWI-LOCK

Doorway Impact Monitored Slide Slock V2

  • Monitored Slide Lock for the DoorWay Impact Sensor (Impact sensor and air switch not included)
  • Connects to an Air/Impact switch to mechanically and electrically lock the door.
DXR-701

Linear 1-Channel Digital Receiver 315 MHz

  • A digital receiver with an isolated relay output designed for use with Linear's DX Format transmitters.
  • When the receiver detects a signal from a transmitter programmed into its memory the relay output activates.
  • The relay has four optional output configurations.
  • 32 transmitter capacity
  • RF activity indicator
  • Quick-learn programming
    • .......more details
Installation Manual
DXR-702

Linear 2-Channel Digital Receiver 315 MHz *** Discontinued

  • A digital receiver with an isolated relay output designed for use with Linear's DX Format transmitters.
  • When the receiver detects a signal from a transmitter programmed into its memory the relay output activates.
  • The relay has four optional output configurations.
  • 32 transmitter capacity
  • RF activity indicator
  • Quick-learn programming
    • .......more details
Installation Manual
DXSR-1504

Linear Supervised 4-Channel Reciever ***No Longer Available

  • Dual diversity superheterodyne receivers
  • Compatible with DX and DXS transmitters
  • Measured line-of-sight range of 1500 Feet
  • Quick-learn programming
  • Selectable supervision
  • Individual outputs per RF channel for alarm low battery and status trouble reports
    • .......more details
DXT-21

Linear 2-Btn 1-Channel Handheld Transmitter 315 MHz *** Discontinued

  • A battery powered portable transmitter designed for use with Linear’s DX Format receivers.
  • Each transmitter can be used in a limitless number of wireless remote control applications.
  • Pressing a button on the transmitter sends a digitally coded wireless signal to its companion receiver
  • The digital DX code format features over a million possible codes.
  • The DX transmitters are precoded at the factory to unique codes so no field coding is required
  • Powered by two 3-Volt #2032 lithium batteries included
    • .......more details
Installation Manual
DXT-25

Linear 5-Btn 8-Channel Handheld Transmitter 315 MHz *** Available to extent of inventory

  • A battery powered portable transmitter designed for use with Linear’s DX Format receivers.
  • Each transmitter can be used in a limitless number of wireless remote control applications.
  • Pressing a button on the transmitter sends a digitally coded wireless signal to its companion receiver
  • The digital DX code format features over a million possible codes.
  • The DX transmitters are precoded at the factory to unique codes so no field coding is required
  • Powered by two 3-Volt #2032 lithium batteries included
    • .......more details
DXT-42

Linear 2-Btn 3-Channel Key Ring Transmitter *** Discontinued

  • Battery powered portable miniature transmitter designed for use with Linear’s DX Format receivers.
  • Each transmitter can be used in a limitless number of wireless remote control applications.
  • Pressing a transmitter button sends a digitally coded wireless signal to its companion receiver. The transmitter buttons have a positive click feel.
  • The digital DX code format features over a million possible codes.
  • The DX transmitters are precoded at the factory to unique codes so no field coding is required. Transmitters can send a signal for up to 10 seconds with each button activation.
  • Each button sends a unique code. Pressing both buttons together sends code three. Press button(s) for a minimum of two seconds to insure receiver activation.
    • .......more details
Installation Manual
E/0172/166

Automatic Systems Spring Assembly

E/1907/012

BLG76 Backup Spring Assembly

E/1929/022

Automatic Systems Round Arm Ass'y 10' (BL229)

  • Used on the BL229 gate op.
E/1929/023

Automatic Systems Balance Spring Ass'y 5.5 MM BL229

  • Used on the BL229 gate op.
E/1929/025

Automatic Systems Bumper and Limit Switch Ass'y (BL229)

  • Used on the BL229 gate op.