The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
The photo eyes travel below the door during the closing cycle.
Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
The Patriot2 non-contact system consists of thru beam photo optics.
Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.
5 permanent PINs and 10 unique temporary PINs ideal for residential and small commercial applications; unique temporary PINs can be set for 1 to 9 uses
Allows for removal of a single PIN while maintaining full access for other users
High-impact polycarbonate front cover; perfect for rugged outdoor environment
Blue backlit metal keypad makes it easy to use under low-light conditions
Electronics are fully sealed and meet NEMA 4X water protection requirements
€¢Electromechanical edge for sectional doors and aircraft hangars.
•The MU22 is a custom edge manufactured to exact specifications.
•The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled.
•Touch sensitive signaling allows immediate reversal or stopping of motion.
•Temperature range: -30F to 155F
•Lead wire: 22 gauge universal
•Sensitivity: nominal 6-8 PSI
•Vertical or horizontal mount
•ANSI/UL325 recognized component
•One year warranty
€¢Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates.
•3-sided activation allows for immediate stopping or reversing of motion
•Contours to round or square posts.
•Temperature range: -30F to 155F
•Lead wire: 18 gauge 2ft length
•Sensitivity: nominal 6-8 PSI
•2 wrie NO configuration
•ANSI/UL325 recognized component
•Cannot be bent
•One year warranty
€¢Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates.
•3-sided activation allows for immediate stopping or reversing of motion
•Contours to round or square posts.
•Temperature range: -30F to 155F
•Lead wire: 18 gauge 2ft length
•Sensitivity: nominal 6-8 PSI
•2 wrie NO configuration
•ANSI/UL325 recognized component
•Cannot be bent
•One year warranty
Mini Storage door non insulated with exterior curtain lock
Custom ordered to exact size
Available colors: Wayne Dalton White Glossy White Mist White Black Contemporary Brown Bronze Buckskin Desert Tan Polar Blue Pacific Blue Royal Blue Teal Bright Green Hunter Green Fern Green Sea Green Cedar Red Violet Red Patriot Red Silhouette Grey Yellow Maroon Harvest Orange Sunset Orange Tangerine
Works for the following Belt Drive models: Relia-G 600 (model 1024) Relia-G 800 (model 2024) QuietLift 600 (model 1042) QuietLift 800 (model 2042) Overhead Door (model 1026) Overhead Door Legacy 800 (model 2026)
14 tooth belt sprocket for Genie and Overhead Door belt drive garage door openers
The USVD-4X Drive Thru Vehicle Sensor uses patent pending Triangular Planar Array (TPA) technology to detect the presence of a vehicle.
The USVD handles any drive thru operation such as fast food banking pharmacies car washes and parking garages.
The USVD is simply mounted on a post or order box and aimed at the location where a vehicle would pass to initiate a transaction. No set-up or adjustments required.
Aux. relay settings for pulse on ENTRY EXIT or BOTH
Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
Brake standard on all RBH operators
#48 chain #50 output sprocket chain
Comes with CPS-U photoeyes and 02-103 O/C/S push button
APT-style operators employ an auto-reconnect trolley with nylon inserts and a resilient-mount motor for quiet operation.
Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
APT operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
€¢Electromechanical small profile edge for rolling steel foor applicaton.
•Touch sensitive signaling allows for immediate stopping or reversing of motion.
•The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip.
•Lead wire: 22 gauge universal
•Sensitivity: nominal 6-8 PSI
•2 wire NO configuration
•Horizontal mount
•ANSI/UL325 recognized component
•One year warranty