Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
LMWEKITU

LiftMaster Wireless Edge Kit Monitored

  • Meets 2016 UL 325 requirements
  • low-energy Bluetooth® transmission up to 130 ft. range
  • Integrated Diagnostics with Gate Operator Speed Installation
  • Protects up to 8 entrapment points
  • Receiver accepts up to 4 transmitters
  • Transmitter accepts up to 2 wired resistive edges
    • .......more details
Installation manualManuel d'installationInstruction manualManuel d'instructionsProduct GuideGuide de produit
A8833-PB

Allstar Replacement Square Push Button Only White Sold Individually

  • Square white button fits Allstar remotes # 8833 8833TC 8833T-OCS
F310

Linear GTO Digital Keypad (Wired or Wireless)

  • As a wired keypad it can operate garage door openers and gate openers that require 24 volts or less and accept normally open contacts.
  • As a wireless keypad it can be used with any gate or garage door opener that receives a 318 MHz RF signal.
  • The keypad must be used in conjunction with the GTO garage door receiver kit (part # RB709) on any other garage door.
  • You may program up to 25 different personal entry codes allowing you to give different entry codes to different users
  • After entering a valid code pressing any key while the gate is opening will stop the gate; pressing any key while the gate is stopped and the gate will reverse direction.
  • The keypad will not affect the auto-close setting of your gate opener system.
    • .......more details
BEA-10-FALCON

BEA Falcon Motion Detector Mount over 11'5"

  • Motion sensor with microwave activationsolution for industrial indoor and outdoor use.
  • Ideal for automatic industrial doors vehicle gates and detection and loading docks.
  • Sensor also has the ability to differentiate between pedstrians and vehicles
  • Can be set vertically from 0 to 180 degrees
  • Mounting height between 11.5' and 23'
  • 12/24V AC/DC
    • .......more details
Installation manualManuel d'installationSell sheetCut sheet
1458W

Fasteners Self-Tapping Stainless Steel Hinge Screw with Washer 1/4" x 5/8"

  • 400 Series Stainless Steel
  • Self Threading
  • Washer Head with Rubber Seal
  • Use with Stainless Steel Garage Door Hinges
DWGK11

Bircher Air-Wave Switch DW40 with N4 Enclosure

  • Bircher pressure wave switch with connection terminals
  • 6.3mm plug tab in impact-resistant plastic housing
  • For pressure wave switch series D1 grey housing bottom.
  • A pressure wave generated by pressing the sensing edge reaches the pressure wave switch.
  • The membrane deflects and the electric contact switches.
  • The electric contact remains switched as long as the input pressure is above the response pressure.
    • .......more details
Manual
3001-0

Signal Tube Treadle Hose Black Sold per foot

  • Applications: for gas stations and apartments
  • I.D. : 3/8"
  • Also known as Drive Over Hose.
882LMW

LiftMaster Multi-Function Control Panel Wi-Fi

  • Push button for garage door operation
  • Program remote controls Wi-Fi Garage Door Openers and MyQ® enabled accessories directly from the control panel
  • Light run-time is 4 1/2 minutes with adjustable light timer option
  • Lock feature designed to prevent operation of the door from portable remote controls
  • Compatible only with LiftMaster® Security+2.0™ and Wi-Fi garage door openers
  • Equivalent to Chamberlain's 41A7185
    • .......more details
Programming instructionsInstructions de programmation
37500

Doorlec DC-2000 Electronic Circuit Board Photocells not Required

  • Works in all Doorlec model openers except R-99
  • Input power to board is 120V
  • 24V DC available on terminals 9 & 11
  • Accessory power on terminals 1 & 11
  • 1 = Stop. 2 = Com. 3 = Open 4 = Close
  • Can be adjusted for constant pressure
    • .......more details
DC200 Logic BoardProduct GuideElectrical Diagram
RADIO-RE101C

Manaras Factory Installed Mod plug-in receiver for Board 70 operators 390 MHz

  • Direct ECB plug-in receiver card (factory installed)
  • 16 transmitters maximun per receiver.
  • Use part # RADIO-KIT004 when adding or replacing on-site.
  • This is now standard equipment on all Circuit board operators
Specification Sheet
461-0002-08

Richard-Wilcox #31 Square Track 8ft Length Sold per Piece

  • Used with #7-6095 rollers
  • Replacement for #75 x14g but additional brackets are required for doors 400lbs-550lbs at a spacing of 1.5ft. Under 400lbs spacing is every 2ft
Specification Catalogue
KPR2000

LiftMaster Wired Keypad and Proximity Reader

  • The KPR2000 supports a maximum of 2000 users in multiple access configurations (card only 4 to 6 digit PIN only or a combination of card and PIN).
  • Supports HID 26 and 30-bit Wiegand proximity card formats.
  • Designed for outdoor environments with a sealed weather proof design allowing you to easily mount anywhere.
  • Functions as a Stand-Alone Controller or in Pass-Through Mode (Wiegand Keypad Wiegand Proximity Credentials ASCII Keypad).
  • Latch Mode allows you to hold open a door or gate for an extended period of time.
  • Rapid Programming and Block Enrollment capability “Add” and “Delete” program cards included.
    • .......more details
Installation instructionsManuel d'installationSell sheetBrochureWiring instructionsInstructions de cablage
CP-BRC-12

Lynx Resettable Circuit Breaker 12 AMP

  • Used on MCJH 3/4 hp 120V operators
7140251

FAAC Hydraulic Oil HP2 1 Litre *** To extent of Inventory

P93501100013

Lux 2B Hydraulic Swing Gate Operator 120V UL/CSA

  • Leaf Weight: Up to 660 lbs (300 Kg)
  • Leaf Length: Up to 10ft (3 m)
  • Opening / Closing time: 17 seconds
104078

Allstar Wireless Keypad 9931-WKE 318 MHz ** To Extent of Inventory

  • Compatible with Allstar and MVP receivers
  • 4-digit access code
  • Backlit keys
  • Operate LED
  • Power: 9-volt battery
  • Codes: 19683
    • .......more details
Programming Instructions
AK-11

Linear Exterior Digital Keypad (ACP00748)

  • Self-contained keyless entry system ideal for airports hospitals warehouses office buildings parking lots and many other commercial facilities
  • Rugged cast aluminum enclosure for indoor or outdoor mounting on a wall or pedestal
  • Four independent outputs and timers: two form C relays and two solid-state open collector outputs with unique programming per entry code
  • Up to 480 programmable input codes of one to six digits each for activating either or both relays
  • Two LED indicators show system status
  • Key operating features include: door sense input; inhibit input; request-to-exit input; alarm shunt output; timed anti-passback; and keypad lockout
    • .......more details
Programming InstructionsInstructions de programmation
LM21XPBB

LiftMaster Extended Performance Fire Door Release Device with Battery Backup

  • UL864 Revision 9 compliant
  • Programmable DIP switch delay setting - either 10 20 30 or 60 seconds delay of door release to permit passage clearance
  • Inputs for normally open 2- or 4-wire detectors and 4-wire normally closed detectors
  • Trouble and alarm relays for communication with the fire alarm control panel if required
  • Audible trouble sounder to indicate when the release device is not operational
  • On board diagnostic LEDs for easy troubleshooting
    • .......more details
Installation Manual
2420L

Special ends 2026-05-31

LiftMaster Basic Series Chain Drive 3/4HP DC Motor Wi-Fi Battery Backup Integrated Camera

  • Chain Drive and DC motor with soft start/stop for quiet operation
  • HD Quality Camera with night vision
  • 1 LED bulb (60 watt max)
  • Two-way communication to the myQ app
  • Premium battery backup included (485LM)
  • Comes with: 1 (L993M) 3-button remotes
    • .......more details
Product Guide 2420LAccessory Compatibility Chart 2025Comparison Chart 2025
OPJ-6114-M-N1

Manaras Heavy-Duty Jackshaft Op 1 HP 120V 1PH Monitored ECB w/N1 Photoeyes

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
RW-213-041

Fasteners Carriage Bolt 5/16"-18 x 3/4" Zinc Plated 1000/Box

  • Full length thread
  • Plated
  • Gr 2
36350

Doorlec Reversing Time Delay 1.5 sec. 24VAC

  • In closing cycle door will stop for 1.5 seconds and reverse to fully open
TNR-HDXL-CUSTOM

TNR Doors Extra Large Rubber Door Price by Quote Only Made to Order

  • Suitable for applications up to 55 feet wide and 35 feet high
  • Self-supporting channel steel C10 & flatbar mounting assembly
  • Knock-away double angle steel bottom bar for 15lb/ft with rubber loop and reversing edge
  • Frame mounted thru-beam photoelectric sensor
  • High-Efficiency Heligear Head (HG) Operator with multi-function PLC panel
  • Door speed of up to 12 inches per second
    • .......more details
VME1-208-3

Pivin Drapeau Elect Motor 1 HP 208V 3PH FR56C For BCSI-BLXL ** Price by Quote Only

CP-SH-58-812

Lynx Complete Output Shaft Assy for TC3

  • Complete assembly with bearings
  • Used to be 8-1/2" long it is now 10-1/2" long will work the same.
SL585101UL

LiftMaster Industrial Slide Gate Op. 1 HP 115/230/208V 1 Ph Heater NOT Incl. ***NLA

  • SL585UL features a heavy- duty industrial lockable metal cover.
  • Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
  • Manual Disconnect when unlocked allows gate to be operated manually.
  • Quick Close and Anti-tailgate quickly secure property preventing unauthorized access.
  • Lockout/ tag-out Feature prevents power from being switched on when servicing operator and safeguards workers from high-voltage power.
  • Automatic Solenoid Brake prevents the gate from being back driven.
    • .......more details
Installation ManualManuel installationBrochureSell sheet
38123A

Genie Powerhead Mounting Flange

  • Mounting bracket connects the powerhead to the rail assembly.
  • A tongue on the flange fits into the bearing block assembly on the rail to keep it in place.
  • Fits TriloG PowerLift GPower and PowerMax Operators
DS350

Heavy-Duty Commercial Non-Insulated Rollup Sheet Door with Interior Slide Locks

  • Heavy-duty Model DS-350 has statewide Florida product approval for wind load protection up to 190 mph.
  • This door is ideal for commercial applications with openings up to 16’ wide by 16’ high.
  • Heavy-duty 13-gauge guides attach to 8-gauge wall angles to give maximum wind load protection.
  • Installation to masonry or steel is quick and simple with no special preparation or overhead tracks needed.
  • A wide selection of colors to choose from
  • Made to Order
    • .......more details
1116633121.S

Overhead 1-btn Transmitter 312 MHz ** No Longer Available

  • Replaces the 1091303121.S
  • 1 channel transmitter opens and closes 1 door
  • Codes using 9 dip switches with 3 positions
  • Battery (ALK12V) and visor clip included
  • Compatible with all Overhead Door 312 MHz frequency garage door openers that were manufactured before 1996.
GH103-L5

LiftMaster Gearhead with Brake 1 HP 208/230/460V 3-Phase Logic 5

  • Includes CPS-U photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
PHOTO-061

Manaras Monitored Photoelectric Cells N4X (Fraba)

  • Monitored NEMA 4X enclosure through-beam type photocell
  • 4-Wire
  • Suited for industrial environments
  • Range: 45 ft
  • Supplied with 3ft of wire
Installation Manual
37520

Doorlec DC-2000 Electronic Circuit Board UL325 Requires Monitored Photocells (MUST incl. resistor)

  • Works in all Doorlec model openers except R-99
  • Input power to board is 120V
  • 24V DC available on terminals 9 & 11
  • Accessory power on terminals 1 & 11
  • 1 = Stop. 2 = Com. 3 = Open 4 = Close
  • Can be adjusted for constant pressure
    • .......more details
GEAR004

Manaras Plastic Gear for MDJ/MDT

  • White plastic gear with 2 holes to accept COUPLING001
K32-11009

LiftMaster Gear Reducer 45:1 1/3-1 HP

  • Same as: 3211009 3290011 32-11009
  • For use on 3-horsepower 45:1 LiftMaster GH (gear head) commercial garage door operators
E/BLOP/246

Automatic Systems Option DBK Fan Heater 120V-400W for BL229

PW-110

Devanco Power Wipes Heavy Duty Dual Sided Cleaning Towels 110/Bucket

  • These towels have an abrasive side for tough scrubbing and a smooth side for delicate surfaces.
  • They are loaded with commercial grade cleaning power and won't dry out like the competition
  • 110 double-sided 12" x 8" towels Citrus scent
  • Safer than harsh thinners or gasoline
  • Use on nonporous/nonabsorbent surfaces to include: all metal surfaces sealed wood equipment vinyl and ceramic tile.
  • We recommend testing on plastics rubber and latex paint in inconspicuous areas before use.
    • .......more details
Safety data sheetFiche de données de sécurité
333857

Wayne Dalton T-Style Weather Seal Sold per Foot

  • Used on garage doors and mini storage doors
  • T = 7/16" wide – .438 Bulb is 7/8" x 7/8"
MET-14500C

Cable Tie Metal Tooth 14" 50 LB Black 100/Bag

CAPACITOR008R

Manaras Capacitor 440-648uf incl. Bleeder Resistor

  • Used for 3/4 HP 120/230VAC 1 ph motor255 374 & 258
  • Also for 1 HP 120/230V 1 ph motor350
M8-705

Marantec Photoeyes 69190 / 97246

  • Works on all Marantec units
  • Includes brackets hardware and wiring
  • Same as item #86850 97246 used to be M4-705
  • Made in Germany
Installation instructions
AAA

Battery AAA Alkaline Duracell Procell Sold Individually

  • Sold Individually
891LM

LiftMaster 1-btn Transmitter Sec+ 2.0

  • Controls a single garage door opener or gate operator or MyQ® enabled light accessory
  • Equipped with Security+2.0™ rolling code technology that virtually eliminates radio wave interference
  • 3V lithium battery included
  • Compatible only with Security+2.0™ LiftMaster® garage door openers or gate operators
  • Equivalent to Chamberlain's 950ESTD
Programming InstructionsInstructions de programmation
17307

Doorlec DC-3000R 1-Channel Receiver 313 MHz

  • 10 dip-switches for programming
  • 24VAC power input
  • 1 N/O relay
Mounting Instructions
17308

Doorlec DC-3000T 1-btn Transmitter 313 MHz

  • One block of 10 dip-switches for programming
  • Compatible with Doorlec 17307 receiver (DC-3000R)
  • New smaller Keychain style transmitter replaces older square beige visor remote
Programming Instructions
EP2983-BLACK

Exhaust Port 4" non latching long barrel Black Nylon

  • Inside diameter: 4"
  • Outide diameter: 4-3/8"
  • Sleeve: 2" (non latching)
  • Flange: 6"
  • Includes fasteners
  • Black Nylon
    • .......more details
50-19503

LiftMaster Push to Open Bracket

  • Allows the gate to swing away from the property
  • To be used with LA400 and LA412 gate operators
Installation manual
MV-00280

Micanan Bracket Only for MV-00278 Photocell

  • Bracket Only - photocell NOT included
SAFEPACK-MOD

Doorlec Safepack 24V Control Circuit

  • A safepack module is used as an "Intrinsically Safe Barrier Relay" and in hazardous locations with non-voltage producing sensors allowing the user to use a N.O. non-monitored sensing edge.
CHC-SS-532

Chain Hoist Hand Chain Stainless Steel 5/32" Sold per Foot

  • Welded chain. Weldless chain is not available in stainless steel
787453

FAAC XT4 4 Channel Remote Control Transmitter 433RC ***discontinued

  • 4 Channel
  • Visor clip & 12v battery included
  • Features programmable technology
  • Dimensions: 2" x 2.5" x .5"
LDCO800

Linear 800 Newton DC Powered Garage Door Opener Accept Both Belt or Chain Rail *Replaced by LDCO863B*

  • The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
  • DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
  • Optional Battery Backup available for added peace of mind. Sold separately
  • Low-power standby mode dramatically reduces energy consumption
  • Supplies 800 Newtons of lifting force for heavy doors
  • Compatible with belt-drive or chain-drive T or I beam rails up to 10'
    • .......more details
Installation manualSell sheetRemote compatibility chart
K74-18382

LiftMaster Hall Effect Sensor Assembly **to extent of inventory

  • Formerly 76-G0541 G76G0541
  • For SW470 with GL or S3 Board SW490 with GL Board
RA-AD-WWS-MULTI

Lynx Wireless Wall Station AD455 372 MHz

  • Wireless for easy installation anywhere
  • Controls door open-close light on-off
  • Programmable pet opening (Opens to a pre-selected height of 6"-30")
  • Vacation Slide-Lock: Disables remote transmitters keyless entries and wall stations.
  • 10-second closing safety delay
  • Transmitter program button
    • .......more details
Programming InstructionsCompatibility chart
JRGX1

Chain Hoist Jack Shaft JRG V2 1" Shaft Torque Force (126689)

  • Jack Shaft Mounting plastic guide 4.5:1 reduction
  • Gear drive
  • Fits 3-3/8" minimum offset
  • Includes: 26' of galvanized hand chain - doors higher than 15' require additional hand chain
  • 1 chain keeper
  • 2 shaft collars
    • .......more details
Sell sheet
02-711

LiftMaster Nema 7/9 Ceiling Switch Pull Control

  • Single Pull Switch Control
  • Hazardous Area Overhead Mt. (NEMA 7/9)
  • Die cast hazardous area enclosure
  • May be used in two different ways; as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring). In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
  • Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
  • WARNING: When used on most industrial operators this control will not stop the door. Use another control that has a STOP button in conjunction with this control.
    • .......more details
02-403P

Push Button Control Station 3-Button Surface Mount NEMA 4/12 O/C/S Green Black Red Part # XALD03H7

  • Open/Close/Stop allows complete control of the door.
  • Compatible with all commercial door operators.
  • NEMA 4 4X 12 13
  • Outdoor surface mount station with polycarbonate enclosure part # XALD03H7
Sell sheet
855LM

LiftMaster HomeLink Repeater Kit

  • This kit contains a repeater and a transmitter
  • The HomeLink repeater is only compatible with HomeLink equipped vehicles
Programming Instructions
PL-SW-PHOTO

Lynx Silent Guard Photocell for Proline Openers

  • For models built from 2000+
  • Comes with photoeyes wire and bracket
A01

Lynx Proline Drive Shaft Assembly with Helical Gear

  • Assembly includes the output shaft and nylon gear
27118-600V

Doorlec Electric Motor TEFC 2HP 600V 3PH DC224C

  • Frame size is 56C 1725 RPM for worm-gear reducer driven models
DC7AH

LiftMaster Battery for MAXUM Integrated BBU DC Units 7AH

  • For use in Liftmaster MAXUM DC Commercial BBU ops
  • 7 AMP
  • 20 cycles when fully charged
Z9963

Donkey Cone Torsion Spring Winding Tool

  • Converts a standard 4 hole (90°option) winding cone to an 8 hole (45° option) which is especially helpful in low headroom situations
  • Donkey Cone is a two-piece coupler that securely attaches to a standard 1-3/4” or 2” cone with two fasteners
  • Made from 60/61 heavy duty aluminum
LC-36M

LiftMaster Light Curtain Monitored

  • The Monitored Light Curtain is a primary safety entrapment protection device that is compliant with UL 325.
  • IP67 Water-resistant housing anodized aluminum corrosion resistant
  • Operating Temperature: -40° F to +140° F (-40° C to +60° C)
  • Liftmaster Compatibility: LOGIC 5.0 Medium-Duty DDO8900W / LJ8900W / LJ8950W / ATSWVFOH HPH1 / HPH2 HCTDCUL Fire Door Egress
Product Guide (EN)Guide du Produit
50060

Doorlec Explosion-Proof Pneumatic Edge Kit 12ft Standard. ** ADD ON for Larger Doors

  • Kit includes explosion-proof air switch air hose plugs coil cord & fittings
  • Door size needs to be specified when ordering
TTC-1

Timer to Close Module 14-Pin

  • Works on LYNX-6000 board
PRO-GJ-5011R-RH

Micanan 1/2HP 115V 1P Gearhead Operator with Mechanical Contactor

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • 1/2 HP high starting torque instant reverssssible motor
  • #41 roller chain drive & 41B19 operator drive sprocket
  • Emergency floor level disconnect for manual operation
    • .......more details
Z9202

E-Z Ratch Kit Torsion Spring Winding System ** No Longer Available

  • Kit includes:
  • Two (2) - 21" Extendable Ratchet Handles (extend to a full 30" in length)
  • All-purpose commercial cone Gear Adapter (double-ended)
  • Six (6) Cone Adapter Pins One (1) 7/16" One (1) 1/2" Two (2) 5/8" Two (2) 3/4"
  • Mounting arm spacing allows it to be coupled to spring cone sizes up to 4 3/4" diameter
  • Compatible with 1” main torsion bar installations
    • .......more details
Operating instructions
CSW24UL

LiftMaster 24VDC High Traffic Commercial Swing Operator

  • 24VDC swing gate operator with battery backup
  • Heater NOT included. Heater sold separately # HTR
  • Continuous-duty motor with soft start/stop
  • Receiver holds up to 50 remotes
  • Power: 115V or 220V Single Phase
  • Built-in surge protection
    • .......more details
Installation ManualSell sheetBrochureSite plan
SPECIALPANEL001

Manaras Complete C-Box Special Order

  • Includes limit system limit shaft.
29202

Doorlec Transformer 550Vpr 120V sec. 35VA

370-3343

Stanley Magnet Assembly for Quiet Glide

AUXCARD

LiftMaster Auxiliary Relay Option Board

  • Provides additional contacts for and control of auxiliary devices such as external heaters security devices or warning devices
  • 5V to 240VAC
Programming Instructions
49563

Stanley Chain Drive Traveler Assembly

  • Compatible with all Stanley chain drive units from 1982-present
  • Not compatible with C-Channel models
  • Assembly includes Traveler 49564 and slider 24851
K001A6837

LiftMaster Replacement Logic 4 Circuit Board L4****No longer available

  • iftMaster replacement logic board (L4) kit for Commercial operators L4 board is UL325 compliant & requires CSPU photoeyes for momentary contact operation
  • Works with LiftMaster operators of all voltages and HP
  • Maintenance Alert System (MAS)
  • Open Mid Stop feature
  • Timer-to-close mode
  • Car dealer mode
    • .......more details
41A4373A

LiftMaster Safety Sensor Kit 1993-1998 ** Replaced by 041-0136 & 041-0155-000

  • For LiftMaster Chamberlain & Sears openers built from 1993-1998
  • Kit includes: Saftey sensors 24" wire and gel connectors
  • Replacement: 041-0136 with the 041-0155-000 brackets
17315

Doorlec DC-3200T 32-Channel O/C/S Transmitter 313 MHz

  • Wall mount transmitter for 32-doors
  • Includes 9V battery
  • Old style
Programming instructions
3-34-1

Low Headroom Quick Turn Top Bracket - Set of 2

  • Allows the top door panel to turn quicker saving you 2"- 4" more space. Also allows vertical tracks to be cut down up to 2" allowing more room above springs for operator installation in extreme low headroom situation
  • Sold as a set of 2 brackets
  • Requires 2 rollers per bracket - rollers sold seperately.
  • For residential garage doors.
  • Use with 12" & 15" curve 2" track
SPREADER001

Chain Tensioner for 1" shafts

  • Chain spreader for installation with 1" operator shaft & 1" door shaft.
  • Includes 2 shaft collars and set screws.
  • Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing
Installation instructions
RADIO-50

Manaras MCT-32 3-btn O/C/S transmitter 32 doors 313 MHz ** Replaced by RADIO-EM932

  • Open/Close/Stop remote for 32 doors.
  • By selecting A B C or D on the rotary switch and 1 to 8 on the other you can operate any of the 32 doors.
  • Comes with LED battery life indicator and 9V battery.
  • Can be wall or post mounted.
  • Must be used with 32 MCR series receivers.
Programming Instructions
27020

Doorlec Electric Motor TEFC 1/3 HP 115/230V DC301

Motor Replacement Chart
R5110

Bearing 1" Commercial

  • 1" inside diameter 2" outside diameter
  • 1" steel bearing allows the shaft to rotate securely on a garage door assembly
  • Same as part number 235
LMHS24R

LiftMaster Fire Rated Red Horn / Strobe 2-Wire 12/24VDC

FW14N-W

Fasteners Flat Washer 1/4" Nylon White Sold Individually

  • Fits with LAGS141W to create a metal to metal barrier
  • White Nylon 6/6 1/4B .257"ID x .500"OD x .032" TH
BRACKET204

Manaras OSHW Fork Pivot Bracket

OMJ-6112-M-N1-R/L

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Monitored Circuit Board N1 Eyes RH/LH

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Floor level disconnect mechanism which must be engaged for manual push-up operation
  • 14 cycles per hour 50 cycles per day
    • .......more details
OTBH-6113-AM06

Manaras Apt-Style Trolley Op 3/4HP 120V 1Ph Monitored w/N1 Eyes Silencio

  • The Silencio operators have integrated noise reducing enhancements which make it 4X QUIETER than the Premium Trolley Apartment model (OTBH-A.05).
  • A low headroom apartment type garage door operator designed for use on industrial standard lift sectional doors with high cycling daily frequency requirements
  • Mounting (Low Headroom Design): Ceiling-mounted with only 6.25" headroom clearance required below the tracks. For indoor use only.
  • Dimensions: Back Room: door height + 4'5" (1350 mm)
  • Head Room For Tracks: 5.625" (143 mm) above the highest point of door travel
84602

LiftMaster Chain Drive DC Dual LED Residential Opener

  • Integrated Dual LED Lighting System Reliable Chain Drive®
  • Motor: 12V DC 53 RPM automatic thermal protection
  • Power: 120V AC 60 Hz voltage 6A current rating UL Listed 4' power cord (3-prong)
  • Speed: 7.2" per second upward 7.2" per second downward
  • Lighting: Dual light lens LED - 1500 lumens
  • Included is the 893LM (3-btn remote) 882LMW (Multi-Function Wall Control Panel) The Protector System® Safety Reversing Sensors
    • .......more details
84602 Product Guide84602 Guide De Produit84602 Installation Manual84602 Manuel InstallationReceiver Logic Board Conversion ListComparison Chart
10RD433

BEA Digital Receiver 433 MHz

  • Receiver with integral sequencing "learn" buttons (for vestibule sequencing) pulse/toggle functionality and additional hold time.
  • Operating temperature: -10 to 55C
  • 12-24V AC/DC
  • Max No. of Programmed Units Per Receiver: 100 Transmitters
PBSS-SS

Bearing SS Geaseable 1-in SS Housing

WD-334642

Wayne Dalton Wireless Keyless Entry KEP4 372MHz

  • Opens your garage door from the outside by PIN-code
  • Allows garage access without keys
  • Wireless for fast and easy installation
  • Can operate multiple garage door openers at once
  • Rolling code technology
  • Weatherproof
    • .......more details
17350

Doorlec Cable 5ft with Antenna

VS-GSLG-723

Linear Industrial Duty Variable Speed Slide Gate Op. 2 HP 230V 3 PH

  • Up to 24" per second gate speed
  • Max gate length: 100 ft
  • Max gate weight: 4000 lbs
  • Integral APeX Controller
  • Soft start/soft stop
  • Programmable speed control
    • .......more details
Installation manualSpec sheet
BCSI-BM-31

Disconnect Lever Industrial Slide Gate Operator ** Please use BCSI-PM31

SPRAY-525

Aluminum Touch Up Spray Paint 350g Black / Noir #525

  • 350g
MR-00021

Micanan Trolley Chain Drive # 41 792 Links for 3/4 1 HP 14ft High Door

WEL-200

EMX Wireless Edge Link Transmitter / Receiver Kit WEL-200K (4012-2)

  • Provides a complete wireless solution for interfacing sensing edges with gate and door operators
  • The Wireless Edge Link eliminates the wiring between the safety edge and operator control box
  • No wiring needed reduces installation cost
  • Compatible with NC 10K and pulse monitored outputs
  • Operates two years on two AA lithium batteries
  • Connect up to 4 safety edge transmitters
    • .......more details
Manual
V-101-B

Vinyl Black Sold per Foot

  • Vinyl for 101-ALUM
  • Can be used as replacement vinyl for Garex Arctic Rubber
SAG-M

Siren Activated Gate Sensor Formally SOS Sensor

  • New and Improved Siren Operated Sensor SOS.
  • Allows Entry of Emergency Vehicles through Gates
  • The Siren Activates Gate Opener while all other sounds are rejected
  • Comes with a 4 x 5 Inch Reflective Sign
  • 12-24VAC/DC
  • Emergency responders use the YELP signal to activate the gate
    • .......more details
Installation Manual
SS-1

Super Sneaky Low Headroom Top Bracket Sold as a Pair

  • Designed for use with low headroom standard lift automatic garage door installations
  • Eliminates the need for low headroom double track
  • Effective and easily doubled up for heavy commercial door applications
  • Replaces top fixture and uses existing roller
  • Zinc plated heavy guage metal
  • Sold as a pair
    • .......more details
860LM

LiftMaster Universal Weather Resistant Receiver

  • Weather-resistant for outdoor mounting requirements
  • Provides convenient access to gated communities industrial facilities and commercial sites all with a single transmitter solution
  • Three channels provide expanded remote control capacity: Channel 1 - 50 remotes Channel 2 - 20 remotes Channel 3 - 20 remotes
  • Multiple remote control options available to provide secure access from the safety and convenience of a vehicle
  • Compact design fits most gate and commercial door operators
  • Compatible with 811LM 813LM and all MAX remote controls
    • .......more details
Programming InstructionsInstructions de programmationSell Sheet