Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
.207-2-L-C

Cut-to-Length Torsion Spring .207 x 2" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.207-134-R-C

Cut-to-Length Torsion Spring .207 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
2806.148.180

Whiting .148 x 2-3/16 x 18" Roadside with Cones

27222A

Genie Sprocket Bushing *** To extent of Inventory

  • For Genie Chain Drive or Belt Drive Channel Rails.
  • Fits the following models: PMX700 PMX1200 GPS00-IC GPS1200-IC
  • Available to extent of inventory
K71-D3PH

LiftMaster Drum Brake Kit 3 Ph 208/230/460V (Late Model Logic 5 Shoe and Drum Models)

  • Internal Solenoid Drum Brake with Cable Replacement Kit.
  • Compatible with LiftMaster® Logic 5.0 Model T SD J H and HJ Industrial-Duty Operators.
  • Complete service kit includes: Solenoid Cover Brake Solenoid Brake Drum Cable Mounting Plate and Installation Hardware.
  • Quiet preferred sound profile
  • Industry benchmark stopping performance with adjustability
  • Significantly reduced modes of failure
    • .......more details
Installation manualManuel d'installation
MK-00141

Micanan Transformer 220V-24V-100VA

MM-00334

Micanan Bearing Support Plate for 5HP PRO-GH (Reducer 120)

MV-00305

Micanan Wireless Pull Cord

MV-00011

Micanan 3-btn O/C/S w/Key Lock-Out Nema-4 Pushbutton Control Station

  • Surface mount
PRO-J-5023-U-RH

Micanan 1/2HP 230V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
PRO-LTB-5011-U

Micanan 1/2HP 115V 1P Commercial Trolley Operator With Brake N1 Eyes Monitored ECB

  • Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
  • Trolley track for door up to 12ft standard upcharge for 14' & 16'
  • Door speed 9 inches per second
  • UL325
  • On-Board receiver holds up to 20 transmitters
PO17

Overhead Door Bottom Astrigal Rubber for Rolling Steel Doors Sold by the Foot

LA500-1PKG-XLMU

LiftMaster Residential / Light Comm. DC Swing Gate Op. Extra Large Control Box UL325 (Includes LA500CONTXLMUL (K74-39309-1) LA500DC (2x) 29-NP712 LMRRUL)

  • LA5001PKGXLMU replaces model LA5001PKGXLMDC
  • Updated unit complies with new UL325 code revised Jan 2016
  • System now requires monitored secondary entrapment devices unit will include LMRRU safety photo eye
  • Includes one LA500 arm XL control box receiver unit and photo eye and 2 -7amp batteries
  • Residential arm style swing gate operator with Extra Large control box and battery backup system
  • Battery Backup safeguards your property by providing up to 500 cycles* or up to 24 days* of standby power when the power is down.
    • .......more details
RADIO-EM932

Manaras 32-Door Dip Switch Transmitter O/C/S

  • 3-button transmitter
  • Operates up to 32 doors by using a combination of 2 rotary dials and dip switch keys
  • Open/Close/Stop function
  • LED Indicator
  • Soft touch push buttons including a bright red stop button for easy identification
  • Includes 4 mounting screws and anchors
    • .......more details
Programming instructionsManual
MG00041

Micanan Spring Clip 7/8" ID Sold Individually

  • 2 required per machine
PRO-PL-10053-E

Micanan Wall Mount Control Panel 1HP 575V Non-Monitored ECB

  • Standard features include: N-4/12 12" x 10" x 6" panel B-2 C-2 D1 E2 T TS Mid-stop control functions Time delay on reverse On-board radio receiver hinged cover backplate primary fuses in panel
  • If PBS on cover required an additional charge will apply
  • If panel not ordered with an operator an additional charge will apply
TRACK-GUARD-60

Track Guard 60" Tall Safety Yellow With Base Sold as a Pair

  • Provides impact protection to vertical track
  • 45° angle flange adds strength protects from side impact.
  • 7-gauge steel construction powder coated safety yellow for high visibility.
  • 1/4” foot plate drilled with slotted holes for three 1/2” anchors.
  • Wall flange drilled with slotted holes for four 3/8” anchors
  • Includes: (right) and (left) sides
    • .......more details
40-3505

LiftMaster Gate Warning Sign Plastic English

SL-310T-2

Skylink 2-Btn Visor Mount Transmitter 310 MHz ** No Longer Available

  • Easy to carry or clip on sun visor.
  • Works in conjunction with Skylink Universal Receiver: Model SL-310R.
  • Operating range of 100 feet and more.
  • 12V alkaline battery included.
DS350

Heavy-Duty Commercial Non-Insulated Rollup Sheet Door with Interior Slide Locks

  • Heavy-duty Model DS-350 has statewide Florida product approval for wind load protection up to 190 mph.
  • This door is ideal for commercial applications with openings up to 16’ wide by 16’ high.
  • Heavy-duty 13-gauge guides attach to 8-gauge wall angles to give maximum wind load protection.
  • Installation to masonry or steel is quick and simple with no special preparation or overhead tracks needed.
  • A wide selection of colors to choose from
  • Made to Order
    • .......more details
MP-00039

Micanan High Cycle Mod. for PRO-TTB

  • Modification only
  • For installations that exceed 100 door cycles per day
  • Includes cast iron flanged precision bearings on all shaft and delay on reverse circuit
  • Supplied with #41 chain
CF-101-10

Commercial Side & Top Weather-Strip 10' Long Aluminum / Vinyl

  • Same as Garaga CF101
5-30-7

3" Vertical Track 12-GA 12'-4" (13' door) Sold per Pair

  • Pierced track
M10A

Safety Inertia Brake 1-1/2" Bore 8851 Torque

  • Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
  • Ideal for commercial and industrial use; specifically with rolling shutters and rolling doors.
  • Normal Torque: 8851 lbf.in
  • Locking Torque: 31509 lbf.in
Reference manualTechnical dataSell sheet
15-41B14LGH

Sprocket 14 Teeth 1" Bore 1/4" Keyway

  • Same as 15-41B14LGF
PMT20RI

Carlo Gavazzi Receiver Unit Only

  • PMT20RI has universal voltage input of 10-240 VDC and 24-240 VAC
  • Normally open and normally closed output (no timer).
  • Adjustable sensitivity
  • The housing dimensions are: 25x65x81 mm
  • IP67.
Installation Manual
785105

FAAC XP30 Photocells 30m Range Relay 785163

  • Hardwired pair of Photocell relays
  • 30m Range
  • IP54
  • 24v
  • Dimensions: 55 L x 78 H x21 D mm
CHAIN002

Manaras Hand Hoist Chain Yellow Zinc Plated Sold by the Foot

  • Hand Chain 31.4-19-4.55
.262-334-L

Cut-to-Length Torsion Spring .262 x 3-3/4" Left Hand Wound Red/Yellow

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
SPRING-SQUARE-W

Torsion Spring Square Wire Custom Order

  • Custom spring made to order
880LMW

LiftMaster Smart Control Panel Sec+ 2.0 Wi-Fi

  • Menu-driven panel gives you complete control of the garage door opener; easily view inside garage temperature time and system diagnostics
  • Equipped with the Maintenance Alert System
  • On-board programming capability makes it easy to program remote controls and MyQ enabled accessories and adjust settings
  • Timer-to-Close automatically closes the garage door in 1 5 or 10 minutes; custom setting from 1-99 minutes
  • Displays Fahrenheit or Celsuis
  • Motion detector automatically turns on garage door lights when movement is sensed
    • .......more details
Programming instructionsInstructions de programmation
BL229-GATE-OP

Automatic Systems Universal Perimeter Raising Barrier Gate 120V

  • Highly configurable barrier designed for many applications and environments
  • Numerous accessories offered allowing to meet various installation constraints and various requirements in terms of security
  • Barrier equipped with control unit allowing operation perfectly adapted to every situation
  • Change of configuration or operation possible even after initial installation of the product
Bilingual parts catalogueTechnical manual
BCH751L5-LH

LiftMaster Hoist Op. with Carwash Mod. and Brake 3/4 HP 115/230 VAC Logic 5 Left Hand ***Replaced by CRBH751-LH

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with either CPS-UN4
  • Brake installed on operator
Installation manualManuel d'installationSell sheetBrochure
G-21X13-134-W

Thermal Window Clear 21" x 13" for 1-3/4" Garaga Door White

  • For 1-3/4" thick door
BL-10

Barlock Kit Complete for 10ft Wide Door Kit includes hardware bag

  • Kit includes hardware bag and bars (61-1/2")
Assembly Manual
K20-3050B-4P

LiftMaster Electric Motor 1/2 HP 208/230/460V 3Ph L3 L4 Contactor

  • Standard 1/2 hp motor
  • Same as 20-3033-1
71-90TS

LiftMaster Timer Kit for TS Wiring

  • Field mod. kit
41D0843

LiftMaster Replacement Motor and Sensor 12VDC

  • For Craftsman garage door opener
MEA2

Nice Key Unlock System for Older Metro Gate Op.

  • For underground gate operator
  • (1) MEA2 KEY UNLOCK SYSTEM (2) KEYS- METROPLEX & BIG METRO
  • Does not work on the newer systems. For newer Big Metro use BMA3 lever type release
AK-11-KEY

Linear Key (1) only for AK-11 (2200-884)

  • Replacement Key ONLY qty: 1 only
XT2564-CUT

Xcluder Rodent Block 4" Black Sold per Foot

  • For commercial and residential applications
  • Creates a tough barrier that is virtually impenetrable to rodents
Sell Sheet
HTR

LiftMaster Heater Kit for DC Pad mount Gate Operators

  • Heater kit for pad mount DC gate operators.
  • Includes battery bracket.
  • Protects system to -40° F and installs on operator frame
  • works on 120 or 240 VAC.
Installation Manual Manuel d-Installation
MC824H/V1

Big Metro MoonClever Control Box 110VAC

053156

Magnetic Mount Micro Dome Beacon Amber ** To Extent of Inventory

  • 60 LEDs 360 degree revolving flash / intermittent flash
  • -30 degree celsius to + 50 degree celsius extreme temperature reliability
DS75

Light Commercial Non-Insulated Rollup Door with Exterior Curtain Lock ** Price by Quote Only

  • Mini Storage door non insulated with exterior curtain lock
  • Custom ordered to exact size
  • Available colors: Wayne Dalton White Glossy White Mist White Black Contemporary Brown Bronze Buckskin Desert Tan Polar Blue Pacific Blue Royal Blue Teal Bright Green Hunter Green Fern Green Sea Green Cedar Red Violet Red Patriot Red Silhouette Grey Yellow Maroon Harvest Orange Sunset Orange Tangerine
Sell SheetDrawing
ETM17-24V

EMX Digital Timer *** No Longer Available

  • The ETM-17 series are panel mount digital timers the can be operated in 12V dc or 24V ac/dc power supply ranges depending on model ordered.
  • The output is a form “C” relay capable of 16A@ 30VDC.
  • Internal battery for memory backup of programming in the event of power failure.
  • Designed with 17 ON/OFF events per day and 15 combinations of daily programs for the best flexibility to the user.
  • Manual or Auto mode
38416A

Genie Belt Drive Sprocket

  • Works for the following Belt Drive models: Relia-G 600 (model 1024) Relia-G 800 (model 2024) QuietLift 600 (model 1042) QuietLift 800 (model 2042) Overhead Door (model 1026) Overhead Door Legacy 800 (model 2026)
  • 14 tooth belt sprocket for Genie and Overhead Door belt drive garage door openers
  • Solid metal upgraded replacement sprocket
41A5021-1G

LiftMaster Receiver Logic Board (41A5021-1I) **to extent of inventory

  • This circuit board works with Security+ openers with no light socket.
  • Same as 41A5021-1I 41a5021-3E 41A2021-1 41A5021-1B 41A5021-1C 41A5021-1D 41A5021-1E 41A5021-1F 041A5021-1G 41A5021-1H
J751L5

LiftMaster Industrial-Duty Jackshaft 3/4 HP 115/230V 1Ph L5

  • Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
  • The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • J operators are attached to the door jackshaft to indirectly drive the door
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you
Installation manualManuel d'installationSell sheetBrochure
12-10882

LiftMaster Copper Bushing

  • 3/4" x 1" x 5/8"
41D7675

LiftMaster Receiver Logic Board 2.0

  • Also known as: 45ACT
CP-PU-DRV-HDC

Lynx Drive Pulley 7/8" x 8" 5L HDC

  • 7/8" shaft
  • 8" diameter
RS10295

Roller 2" Steel 9-1/2" stem 10 ball Hurricane Roller

  • High strength steel roller designed for hurricane applications
  • Wheel Diameter: 2"
  • Steel tire Stem made from alloy steel
  • Rated: 15000 cycles for a 12'h door
  • Load rating: 75 lb
  • Box qty: 100 Box weight: 62 lbs (2-9-1/2-10 steel)
    • .......more details
029-98090

T-Style UDI Replacement Door White Stainless Steel Pkg 029-98090

  • For openings within 98" w x 90" h
  • Hardware attached balancer assembly not included
  • Manufactured to exact size
1104-ASFT-16FT

Elton Aluminum Stiffener for 1104 16ft

  • Prevents the 1104 from buckling in the hot sun
SERVICE-6220

Industrial Duty Rolling Steel Non-Insulated Service Door

  • 22 gauge
  • Max size: 18'4" max std. width 20'4" max std. height
  • Slate type: Curved
  • Finishes: Gray White Tan Brown or Galvanized
  • RAL Powder coat option in 188 colors
HDC-411-LH-CONT

Lynx Ind. Jackshaft with Hoist 3/4Hp 115V Contactor Left Hand

  • 1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
  • Solid state circuit board Lynx-6000. Built in 1.5 second delay.
  • 5L V-belt primary reduction #50 drive chain and sprockets.
  • Adjustable friction clutch magnetic solenoid brake.
  • Precision pillow block bearings on output shaft.
  • Fully driven adjustable limit switches.
    • .......more details
Sell Sheet
26-40039

Truck Door Offset U-Channel Seal Retainer 98" Long for Whiting DryFreight Doors *** Obsolete

  • Aluminum extrusion construction.
  • Retainer is offset to allow header clearence with seal when door is in open position.
  • For use with offset bottom seal #26-40045
IG2-EXT-MNT

Miller Edge Wall Mount Extension Bracket

  • 1 ft L x 2" H x 3" W
K001A6039

LiftMaster Control Board for LA400

  • Replaces P/N 127A0071C PN 127A0071F
Installation Manual
18FT-TROLLEY-SET

LiftMaster 18ft Double Angle Rail Set for Comm. Trolley Ops (2 pcs) *Actual length 251"*

  • Double Angle Rails for doors up to 18' high
  • Works with models : MT T GT APT
  • Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
502-0022

Reversing Edge BEP 100C Air Tube 4" from End Edge Length 93.5"

K94-36408-1

LiftMaster Reset Switch LA500 with ID Resistor

  • For use with LiftMaster LA500 Series swing gate operators
  • Includes ID resistor kit
  • Includes LA500 product ID
23-10916

LiftMaster Interlock Switch SPDT

  • Interlock switch for LM commercial door openers with hoist disconnects
  • 15A 125/250VAC
WKP5LM3

LiftMaster Wireless Keypad 5-Code ** Replaced by KPW5

  • Wireless access control keypad
  • Same features as WKP250LM3
  • 5 code capacity - 4-digit codes
  • 2-way design with confirmation beep
  • 900MHz
Programming Instructions
12-10715

LiftMaster Flanged Bearing 1" Keyed

GH503-L5

LiftMaster Gearhead with Brake 1/2HP 208/230/460V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
PL-B11-ARM-STR

Lynx Straight Arm for Proline Operator

  • Used on Proline residential garage door openers
MOD035

Manaras Monitored Photocell Upgrade N1 to N4X

  • Ideal for industrial environments submersible and impact resistant.
  • Flexible design withstands and realigns after mechanical impact.
  • Max. range 45ft.
  • Incl. photoeyes 3ft of conductor wire and mounting hardware.
  • Applies to all operator models with electronic control "M" types.
.319-2-5/8-LH-C

Torsion Spring .319 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .319 ID: 2-5/8" Length: 12 ft
.306-5-1/4-RH-C

Torsion Spring .306 x 5-1/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .306 ID: 5-1/4" Length: 12 ft
.295-5-1/4-LH-C

Torsion Spring .295 x 5-1/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .295 ID: 5-1/4" Length: 12 ft
.225-1-3/4-RH-C

Torsion Spring .225 x 1-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .225 ID: 1-3/4" Length: 12 ft
.218-2-RH-C

Torsion Spring .218 x 2" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .218 ID: 2" Length: 12 ft
.207-2-LH-C

Torsion Spring .207 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .207 ID: 2" Length: 12 ft
.218-1-3/4-RH-C

Torsion Spring .218 x 1-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .218 ID: 1-3/4" Length: 12 ft
BK101/PR

Spring Anchor Bracket USA 8-Gauge sold as a pair

  • Universal spring anchor brackets - Residential/Commercial
  • Centerline adjustment: 3-5/16" to 6-3/4"
  • Bright zinc plated 8 gauge steel
  • No bearing
  • Bearing R5110 sold separately
CPS-MEI

LiftMaster Electric Edge Card **to extent of inventory

  • The CPS-MEI is an interface for a monitored 2-wire edge that can be used in place of photo eyes and meets the monitored requirement of UL325-2010
  • Same as Miller Edge SM-102
RBH755L5-RH

LiftMaster 3/4 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
Installation ManualManuel d'InstallationSell sheet
SOLID_SHAFT_20'

Solid Shaft 1" Keyed 20 ft Galvanized

  • Actual length is approx. 20'-1"
SEL2641KITP8

Erone PC Software Kit for 800 User Receiver ** Discontinued

  • Serial cable for PC connection and software managing 800 users
SEL2641R433K8PM

Erone 800 User Receiver 433MHz

  • Multi-user receiver
  • 800 two-channel transmitters + 7 master transmitters
  • Includes 1 master transmitter S2TR2641E2M for programming
  • 12/24V AC/DC
  • Option: PC software kit # SEL2641KITP8 sold separately
  • 1 NO relay + 1 NO/NC relay
    • .......more details
Installation manualWireless System Chart
CLUTCHPAD008

Manaras Clutch Pad 1" ID 4" OD

  • Replaces CLUTCHPAD002
OPJ-6112-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet
K1D7545CC

LiftMaster Control Board Assembly for LA500 ** To Extent of Inventory

  • 014D1065G
1005-2-10'

Aluminum Bottom Retainer U-Shaped 10' Long**Actual Length 10'1"***

  • For door thickness 2"
36254R

Genie T-Rail Carriage Assembly

  • This part is listed under several part numbers: 36254R.S 36197A 21784R 20438R
  • For all chain drive openers with steel T-rail assemblies
  • Must be installed with inner slide part # 25605R
GH105-L5

LiftMaster Gearhead with Brake 1 HP 575V 3-Phase Logic 5

  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • GH operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • MyQ Mobile App is a free download with no annual activation fee.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
02-711

LiftMaster Nema 7/9 Ceiling Switch Pull Control

  • Single Pull Switch Control
  • Hazardous Area Overhead Mt. (NEMA 7/9)
  • Die cast hazardous area enclosure
  • May be used in two different ways; as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring). In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
  • Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
  • WARNING: When used on most industrial operators this control will not stop the door. Use another control that has a STOP button in conjunction with this control.
    • .......more details
MV-00297

Micanan Commercial Wireless Keyless Entry 372 MHz

  • Will work on Micanan commercial operators that have an on-board receiver
  • If there is no receiver then MK-00648 is required
  • Same as MV-00086
Programming instructionsInstructions de programmation
MK-00659

Micanan 3 Channel (123) Transmitter 372 MHz

  • Works with Logic 10.0 receiver
Programming Instructions
RBH501L5-RH

LiftMaster 1/2 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Brake standard on all RBH operators
  • #48 chain #50 output sprocket chain
  • Box does not include spreader
    • .......more details
Installation ManualManuel d'InstallationSell sheet
RBH751L5-LH

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
Installation ManualManuel d'InstallationSell sheet
RBH751L5-RH

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
Installation ManualManuel d'InstallationSell sheet
CH501L5-RH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 115/230 VAC Logic 5 Right Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with CPS-UN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
K21-36793

LiftMaster Transformer 208-230/460 Volts 20Va

  • 230/460V PRIMARY 24V SECONDARY 20VA
42-31246

LiftMaster Terminal Block 20A 600V

  • 3-position
P93501100013

Lux 2B Hydraulic Swing Gate Operator 120V UL/CSA

  • Leaf Weight: Up to 660 lbs (300 Kg)
  • Leaf Length: Up to 10ft (3 m)
  • Opening / Closing time: 17 seconds
BEA-REMOTE

BEA Falcon/LZR Programming Remote

  • Makes it easy to set up and make adjustments to all key parameters of the Falcon motion detector while at ground level
Programming instructions
K72-19979

LiftMaster Clutch Shaft Kit 2005 +

  • Assembly includes: Clutch shaft keyed flange bearing dual sprocket 32/14 14-tooth sprocket E-ring compression sprocket chain wheel assembly pulley assembly chain guide assembly shim & thrust washers copper bushing 12-10882 and roll pins