Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
SOLID_SHAFT_7FT

Solid Shaft 1" Keyed 7 ft Galvanized

  • Actual length is approx. 7'-1"
M18

LiftMaster Remote Control Tester ** NLA

BK150/PR

Residential Bottom Bracket BB-100 sold as a pair

  • For use with 2" rollers
  • Works on 1-3/8" 1-1/2" 1-3/4" and 2" doors
  • 13 gauge residential bottom bracket that secures to the bottom of the door allowing the cable to be attached to the door for lifting
  • Same as part number 263
Q024

LiftMaster Limit Switch Assembly for SL3000 (K75-50097) *** To Extent of Inventory

  • Same as part number K75-50097
302850

Linear 2-Channel Multi-Code 12-24V Gate Receiver 300 MHz / 310 MHz

  • The Model 302850 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency.
  • The 300 MHz frequency is compatible with standard Multi-Code transmitters
  • The 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.
  • Operates on 12-24 volts AC or DC power
  • Two channels
  • Whip antenna
    • .......more details
Programming Instructions
GREASE

Gear and Rail Grease 3/4 oz Tube *** No Longer Available

  • A low temperature lithium based grease
  • To avoid tooth wear premature failure and temperature rise caused by friction by promoting sliding between teeth
10-10355

LiftMaster Solenoid Link

109950

Linear 1-Channel Multi-Code Gate Receiver 12-24V

  • Operates on 12-24 volts AC or DC power
  • One channel
  • Whip antenna
  • 3-foot antenna coax and bulkhead connector
  • Codes: 1024 (set by dip switches)
  • RF frequency: 300 MHz or 310 MHz (jumper selectable)
    • .......more details
Programming Instructions
.250-134-R

Cut-to-Length Torsion Spring .250 x 1-3/4" Right Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.225-134-R

Cut-to-Length Torsion Spring .225 x 1-3/4" Right Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.207-134-L

Cut-to-Length Torsion Spring .207 x 1-3/4" Left Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
855LM

LiftMaster HomeLink Repeater Kit

  • This kit contains a repeater and a transmitter
  • The HomeLink repeater is only compatible with HomeLink equipped vehicles
Programming Instructions
CB14B0500

Cable 1/4" 7x19 500' Galvanized

  • Galvanized Cable 1/4" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
Comparison charts
ER4

Carlo Gavazzi Reflector 3-1/4" (84mm) Round

  • Can be used with the PMP12RI retro-reflective detector
  • Can be used with the reflector hood
  • Dimensions: 84 mm wide 7.4 mm thick
ME123-BLK-RH

Miller Edge Black Right Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
TUBE_SHAFT_17-STL

Hollow Shaft 1" x 17'-0" Steel 13 gauge

  • When ordering order one foot longer than actual door width.
813LM

LiftMaster 3-btn Dip-Style Transmitter Sec+ 2.0 ** To extent of inventory

  • Encrypted DIP style three-button remote control with Security+2.0 technology
  • Ideal for applications such as gated communities or commercial applications requiring a large number of remotes for a common entrance
  • Easy to code 12-position DIP switch offers up to 4096 codes
  • May also be programmed for Open/Close/Stop functionality
  • Narrow band transmission on 3 simultaneous frequencies (310 315 390 MHz)
  • Compatible only with Security+ 2.0™ commercial receivers and operators
    • .......more details
Programming InstructionsInstructions de programmationSell Sheet
829LM

LiftMaster Garage and Gate Monitor Sec+ 2.0 **to extent of inventory

  • This innovative monitor lets you check and close the garage door or gate from any room in the house.
  • Green and Red LED lights indicate whether the garage door or gate is open or closed.
  • Volume controlled audible alert lets you know when the garage door or gate is being opened.
  • Able to monitor and close up to four garage doors or gates.
  • Compatible only with new Sec+ 2.0 MyQ compatible garage door and gate operators.
Programming InstructionsInstructions de programmation
825LM

LiftMaster Remote Light Control Sec+ 2.0 ** To Extent of Inventory

  • Operate any lamp with your garage door opener remote control.
  • Operate from your computer or smartphone by using the Liftmaster Internet Gateway.
  • Compatible only with Security+2.0 garage door openers and MyQ technology accessories.
Programming InstructionsInstructions de programmation
71AB120

LiftMaster Solenoid Brake Assembly for APT Logic 4

  • omplete disk brake assemble including 2-wire solenoid
Installation Manual
71-B575H

LiftMaster Interior Brake Kit with Cable 575V (Logic 3 4 and early 5 Disc and Pad Models)

  • Interior mount brake kit for operation with chain hoist
  • Includes solenoid
Instruction Manual
71-B240H

LiftMaster Interior Brake Kit with Cable 230-460V (Logic 3 4 and early 5 Disc and Pad Models)

  • Interior mount brake kit for operation with chain hoist
Instruction Manual
41AC075-2S

LiftMaster Circuit Board Assembly for Single and Double Capacitor Models 315Mhz

  • Assembly includes: End panel Logic board and Light socket
  • For chain drive units with two lights ie..3575 3585 3595 PD752D and PD758D
23-2017

LiftMaster Limit Switch SPDT

24-24-2

LiftMaster Relay 24VAC 8-Pin DPDT

12563

Doorlec Upper Brake Shoe - Right

  • Fits on all Doorlec operators equipped with brake shoes
  • Use with drum #12561
12561

Doorlec Brake Drum 4" Diameter

  • Fits all Doorlec operators equipped with brake shoes
17311

Doorlec AT1035D 1-btn Mini Transmitter 313 MHz ** To extent of inventory

  • One block of 10 dip-switches for programming
  • Compatible with Doorlec 17307 receiver (DC-3000R)
  • Includes 12V battery (GP23A)
CP-SW-AT

Lynx Single Limit Switch

CP-BRAKE-ASSBLY

Lynx Brake Shoe Assembly

  • Brake shoes for all Lynx operators
  • Assembly includes the shoes
  • release spring and bolt included
LYNX-RCVR-OCS

Lynx O/C/S Receiver

  • For use with Lynx o/c/s transmitter # T3B-OCS
Compatibility chart
H14GHALF

Half Hinge #1 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 1-5/8" wide with slotted holes
I500

Erone 1100lbs Exterior Maglock Surface Mount Stainless *** To extent of Inventory Repl. by ESM500

  • 1100 lbs holding force ( VS15R)
  • 12/24Vdc – Current Draw: 550mA @ 12Vdc – 280mA @ 24Vdc
  • 220mm (H) x 64mm (W) x 40mm(D) (8.6in x 2.5in x 1.5in)
  • Exterior applications & High-traffic areas
  • Includes monitoring capability
  • Stainless steel
    • .......more details
Installation manualManuel d'installationSell sheetDrawing
8FT-TROLLEY-SET

LiftMaster 8ft Double Angle Rail Set for Comm. Trolley Ops 19-5808-P (2pcs) *Actual length 131"*

  • Double Angle Rails for doors up to 8' 6" high
  • Works with models : MT T GT APT
  • Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
14FT-TROLLEY-SET

LiftMaster 14ft Double Angle Rail Set for Comm. Trolley Ops 10-5814-P (2 pcs) *Actual length 203"*

  • Double Angle Rails for doors up to 14' high
  • Works with models : MT T GT APT
  • Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
  • Actual Length 16' 11"
LIMIT015

Manaras Single Limit Switch without Lever

  • No action limit switch - Cherry
  • Used on Manaras operators built from 2002 to Feb. 2009
  • Also used as disconnect switch on Opera models
Limit Switch Chart
BRAKEPART019

Manaras Brake Band Assembly (Standard Brake)

  • Replaces BRAKEPART017 SHOE008
  • To use on brake drums with edges (DRUM004)
  • New part number is BRAKEPART019KIT
Installation Manual
6589

WhitingBrush Side Seal assembly for insulated doors

  • Fits Coldsaver and Tempguard
2235.096

Whiting Coldsaver Bottom Panel 14-1/2" x 96" with seal and retainer

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
298601

Linear Wireless Multi-Code Keypad 310 MHz

  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • 4-digit access code
  • Backlit keys
  • Easy access to battery
  • Power: 9-volt battery
  • Codes: 1024 (set by dip switches)
    • .......more details
Installation Manual
308302

Linear 2-Channel Multi-Code Key Ring Transmitter 310 MHz

  • Open/Close remote for 2 doors
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 12-volt battery
  • Codes: 1024 codes for each channel (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
109710

Linear 4-Channel Multi-Code Visor Transmitter 310 MHz

  • Open/Close remote for 4 doors
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 9-volt battery
  • Codes: 512 per channel (set by dip switches)
    • .......more details
Programming Instructions
9931MT

Allstar 1-btn Mini Transmitter 109391 318 MHz ** NLA

  • Open/Close mini remote for 1 door
  • Compatible with Allstar and MVP receivers
  • Tab for key ring
  • Power: 12-volt battery
  • Codes: 19683 (set by nine trinary dipswitches)
  • RF frequency: 318 MHz
    • .......more details
Programming Instructions
8833T

Allstar 3-btn 3-Door Transmitter 108817 318 MHz

  • Open/Close remote for 3 doors
  • Compatible with Allstar and MVP receivers
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 6561 (set by trinary dip switches)
  • RF frequency: 318 MHz
    • .......more details
Programming Instructions
DR4

Linear 4-Channel Delta3 Receiver 310 MHz *** To Extent of Inventory

  • Activates four devices or UP DOWN STOP for one commercial device
  • 310 MHz 8 dip switch
  • Power: 24 VAC/VDC
  • Dimensions: 4.9" W x 4.2" H x 1.3" D
  • Same as DNR00023A or DR4V
Programming Instructions
8833TC-OCS

Allstar 3-btn 3-Door O/C/S Transmitter 109025 318 MHz ***Replaced by P-8833TC-OCS

  • Open/Close/Stop remote for 3 doors
  • Compatible with 3-channel Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Slide switch selects door to operate
  • Power: 9-volt battery
    • .......more details
Programming Instructions
217436

Linear Drive Sprocket - Chain (HCT)

HAE00022

Linear Inner Slide Assembly - Belt (HBT)

220499

Linear Drive Sprocket - Belt (HBT)

HAE00002

Linear Safety Beam Set *** No Longer Available

  • Set includes: Sender and Receiver photocells wire and connectors
  • Safety beams will work with all Linear operators that currently have safety beams installed.
HAE00040

Linear Control Logic/Receiver Board

  • Replaces HAE00039
  • Control board for LSO LDO LCO models
219109

Capacitor 1/3 HP 43-53 MFD 250V

  • For LDO33 only
7952

Whiting Truck Door Stud Plate Gasket

15.1

Whiting Truck Door Stainless Steel Center Hinge

1001-14-GREY

Commercial Side & Top Weather-Strip 14' Long - Grey

  • Aluminum retainer with grey dual-fin vinyl
  • Sold by full case quantity (10)
300BL

3" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1705
600BL

6" Light Brush Insert 6ft Long

  • Polypropylene bristles
138BL

1-3/8" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1702
100BL

1" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1701
1006-2-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

  • Black with flexible fin to touch door face.
  • For door thickness 2"
1006-1-3/8-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/8"
1006-1-1/2-24'

Rigid Vinyl Bottom Retainer U-Shaped 24' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
1006-1-3/4-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/4"
1003-1-5/8-12'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
1003-1-3/8-24'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
  • DIE # ES18009
1003-1-3/8-16'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
1001-12-GREY

Commercial Side & Top Weather-Strip 12' Long - Grey

  • Aluminum retainer with grey dual-fin vinyl
  • Sold by full case quantity (10)
95-00116

Truck Door Rivet 1-1/4" Stainless Steel ** To Extent of Inventoy

  • Stainless steel construction
  • Round head design
  • Cross Reference: T #89217-0040
95-00114

Truck Door Rivet 1" Stainless Steel

  • Stainless steel construction
  • Round head design
  • Cross Reference: T #89217-0032
94-00002

Truck Door Clevis Pin 1/4" x 7/8"

  • Zinc Plated finish
  • 1/4" x 7/8"
28-02201

Truck Door 2" Vertical Track & Right Angle Assembly 106.5" Curbside (RH) for Whiting Roll-Up Doors

  • SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
  • Assembly includes: Right angle mounting track Vertical track and Torsion bracket
  • Cross Reference: W #2275-1
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
26-94323

Truck Door Bottom Panel with Seal (13" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
26-94321

Truck Door Bottom Panel with Seal (11" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
26-40402

Truck Door Reefer Side Seal 98" Long for Whiting Coldsaver

  • Co-extruded using PVC backing with flexible PVC seal against the door.
  • Cross Reference: W #7470
26-14321

Truck Door Bottom Panel with Seal (11" x 98") for Todco Dryfreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment
  • 3/4" thick 7 ply exterior grade medium density plywood Primer finish
  • Comes only with bottom retainer and seal (installed)
HD8460-138

T-Handle Cable Lock System 1-3/8" ***Use HD8460-200 instead***

  • Complete cable locking system for 1-3/8" door.
  • System Includes: Auto Latch Striker Keeper T-Handle keyed with 4" shaft Inside Release Handle 3/32" cable and all required hardware.
Z9401

Coupler 1" Bore Non-Ajustable

  • Non-Adjustable Shaft Coupler Steel Zinc plated
  • 1" Bore
  • L= 4.7" 3 screws and nuts
  • Tightening torque on shaft: 20lb-ft max
Z9403

Coupler 1" Bore Adjustable Silver

  • Malleable Iron for strength
  • Set screws and jamb nuts installed
  • 1" bore with 1/4" keyway
  • Thickness: 0.35"
  • Painted silver
CBA18B08

Cable Assembly 1/8" 7x19 114" Sold per Pair

  • Galvanized cable assembly for 8ft door (114" = 9'-6")
  • Aircraft cable made of 19 wires per strand and 7 strands per cable
  • Sold as a pair
  • Same as part number 458
CBC18

Thimble 1/8" - 100 per pkg

CB18B0500

Cable 1/8" 7x19 500' Galvanized

  • Galvanized Cable 1/8" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
Comparison charts
CB332A0500

Cable 3/32" 7x7 500' Galvanized

  • Galvanized cable 3/32" 7x7 500ft spool.
  • Cable break strength: 920 lbs.
Comparison charts
8500C

LiftMaster Residential Jackshaft Garage Door Opener ***No Longer Available

  • MyQ technology enables you to securely monitor and control your garage door opener and houselights with your smartphone tablet or computer
  • Alerts can be received as email or pop-up (push) notifications on your mobile device so that you always know the status of your garage door and houselights
  • MyQ mobile app is a free download requiring no annual activation fee requires 828lm
  • Wall mount design with an ultra-quiet 3/4 HP soft start-soft stop DC electric motor
  • Frees the garage ceiling of hanging operators and rails and opens up the space for additional storage – ideal for cathedral or obstructed ceilings
  • Remote light (380LM) delivers 200 watts of light with adjustable light time delay
    • .......more details
R5201

Cast Iron Pulley 3"

  • Bored for 3/8" diameter bolt
  • Cable diameter: 1/8"
  • Cast iron pulley mounted on two pressed sealed bearings.
  • Radial Load: 400lb
R5114

Shaft Bearing 1-1/4" Machined 900LBS

  • Standard press-in bearing no retainer
  • Rated for 900 lbs
846CABLECL

Cable Clip - 14GA

  • Cable Adjustment Clip
  • 3 hole pattern
  • Used to attach a cable to the S-hook on an extension spring system
  • Same as part number 423
BK021/PR

Commercial 3" Safety Bottom Bracket ** Indef Delivery

  • Maximum cable diameter: 1/4"
  • Maximum door weight: 1650 lbs Zinc
  • Plated Steel
  • Sold as a pair
BK050/PR

Residential Bottom Bracket Low Headroom BB-5 LHR Sold as a Pair (L & R)

  • Minimum door thickness 13/16"
  • Gauge: .109 Height: 6-7/16"
  • A pair includes one left hand and one right hand bracket.
BK258/PR

End Plate 2-5/8" flanged with bearing 13GA Sold as a Pair (L & R) (EBF 258)

  • Sold as a pair
  • Box quantity: 30
23-10041

LiftMaster Limit Switch Commercial

  • Will work on LiftMaster and Micanan operators
25-10050

Truck Door Center Hinge Zinc for Todco Roll-Up Doors

  • Zinc plated Steel construction
  • Cross Reference: T #61196 T #59126 W #4012 220100
4X8SC50

Devanco Loop 4' x 8' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
1003-5"-150FT

Bottom U-Rubber 5" Black 150' Long

  • 150ft spool of vinyl insert.
828LM

LiftMaster Internet Gateway Sec+ 2.0

  • Monitor and control your garage door opener from anywhere in the world right from your smartphone or computer
  • Easy and fast installation through your in home router.
  • Only works with new MyQ compatible Garage door openers
  • Controls up to 16 garage doors gate operators or MyQ-Enabled devices.
Programming InstructionsInstructions de programmationSell SheetBrochure
345

Cable Clamps Galvanized 1/8" 100/pkg

  • Galvanized malleable cable clip
PRO-HBH10053U-L

Micanan 1 HP 575V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 1 HP575V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
RP-TRF-110-2415VA

Lynx Transformer 110/24 15VA *** NLA

  • For old 455 Automatic Doorman opener
PRO-GHC-10053U-L

Micanan 1 HP 575V 3P Gearhead Operator with N1 Eyes Monitored ECB Left Hand

  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
  • Full function Smart 10.0 logic board and on-board receiver
    • .......more details
736

Fasteners Round Head Carriage Bolt 5/16-18 x 3/4" Gr 2 1000/Box

  • Full length thread
  • Max torque = 12
31103

Doorlec Sprocket 41B36. KW/SS 1"