Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
K07-3611

LiftMaster Disconnect Bushing

  • Compatible with LiftMaster® SL590 Slide Gate Operators
GALV-393-6-144-L

Torsion Spring .393 x 6" x 12ft LH Galvanized Orange

  • Wire size: .393
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
MOD050N2

Manaras Friction Clutch Mod. #50 Chain 1-1/4 RGH

  • Installed directly on the output shaft of the operator.
  • Provides added protection by causing the clutch to slip when the door systems requires adnormal torque to be operated.
  • Includes sprocket for #50 chain
  • Operator mounting side must be specified
  • A spreader bar cannot be used in conjunction with this modification
  • This modification applies to RGH ops
    • .......more details
BEA-10BODYGUARD-T

BEA Automatic Overhead Pedestrian Swing Door Sensor

  • Designed to provide threshold protection during the open state
  • Prevents a closed door from opening and an open door from closing when a person is in the detection zone.
  • Adjustments can be made with the BEA remote.
  • Installation height: 9' max (6'6" to 8' recommended)
  • Operating temperature: -22 F to 140F
  • Immune to electrical and radio frequency interference
    • .......more details
Installation Manual Manuel d-Installation
41D3485

LiftMaster Chain Kit 10'

  • For use with various chain drive garage door openers that utilize a T-rail and have a 10' garage door
  • Same as 041D3485
E/1929/023

Automatic Systems Balance Spring Ass'y 5.5 MM BL229

  • Used on the BL229 gate op.
10TD900TR

Transmitter 900mhz Touchless Wireless Converter

  • Allows wireless door activation without the need to run additional wires to easily change existing door configurations from hardwired push plates to touchless door actuators.
  • Microwave doppler technology allows for consistent and reliable detection.
  • For automatic door apllications.
  • Compatible with 10RD900 and 10BR2900 receivers.
  • IP65
  • Nema 4
    • .......more details
MWTA12B

Miller Edge Transmitter with Low Battery Alarm Small

  • The transmitter comes standard with a NEMA 4 weather-proof enclosure
  • Compact design that allow for easy troubleshooting.
  • The transmitter has an audible alarm that activates when the battery has 25% of its life remaining
  • Easy to configure · Non-monitored system ideal for operators manufactured prior to: · Doors: August 2010 · Gates: January 2016 · NEMA 4 transmitter built to endure rugged environments
  • Power Source: (2) 1.5 volts AA lithium batteries
  • Input: 2-wire N.O. sensing edge
    • .......more details
Installation manualSpec sheet
OTBH-6532-M-N1

Manaras Trolley Operator 1/2 HP 600V 3 Ph Monitored w/N1 Photoeyes

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
K79-13493B-500

LiftMaster Logic Control Board Assembly (FDO FCC LMPLC 500V CHIP)

  • For use with various LiftMaster® Commercial Door Operator Models
15-50B72QGH

Sprocket 72 Teeth 1-1/4" Bore 1/4" Keyway

  • For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators
K002-KEY

Replacement Key for 3BXLT Key #2

  • Replacement key only for key #K002
MOTOR337

Manaras Electric Motor 3/4HP 120/240V 1PH

  • C-flange continuous-duty
  • For gearhead operator
WHITING-ST

Whiting Strap Mounted Inside Door Option

  • This is an add-on option when ordering a Whiting door
2110-643-UPS

Linear Snap Lock Assembly with Keys (2)

  • Fits HSLG GSLG-A Ups
ME00048

Micanan Keyway 1/4 SQ x 3/4" Long

Q521

LiftMaster Wiring Harness Kit CSW-DM K94-50287

  • Compatible with LiftMaster® Model CSW200UL Swing Gate Operators
  • Also known as: 94-50287 K94-50287
K001A6407-1

LiftMaster Logic Board Absolute Encoder

  • Compatible with LiftMaster® Models RSW12V and RSW12VH Swing Gate Operators
2704.177_13.5

Whiting Roadside Torsion Spring 2-3/16" ID 13-1/2" Long

  • Torsion spring wire only
  • .177 wire size
SB3381-PAIR

Garex End Bearing Plate 3-3/8" - 1" Commercial Sold as a Pair

TDC1222-14

Liftmaster Comm. 14FT Trolley Angle set (10-5814-P x 2) and #41 chain pack (TDC41-14) ***Actual length 203"***

  • Double Angle Rails for doors up to 14'6" high
  • Includes #41 chain pack
TDC7-12

Liftmaster Comm. 12FT Trolley Angle set (10-5812-P x 2) and #48 chain pack (TDC48-12) ***Actual length 179"***

  • Double Angle Rails for doors up to 12'6" high
  • Includes #48 chain pack
70598.000

Todco 1" Nylon WondeRoller

  • Special Order Item
  • Perfect for dry freight applications this roller has been tested to last 5 - 10x longer than a standard roller.
  • A fully sealed bearing to keep dust and debris out
  • 2 Inch Track WonderRoller is a nylon-coated-stem track roller for larger application panel truck doors
  • Polymer vinyl roller head couples with this stem to suit the constant up-and-down and roadway jostling on a freight or other large truck
  • Roller prevents build up in bearings with a sealed external washer
    • .......more details
OGH-6534-M-N1-LH

Manaras 1 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
CGH205L5-RH

LiftMaster Gearhead with Brake & Carwash Mod. 2 HP 575V 3P L5 Right Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
GALV-331-258-144-L

Torsion Spring .331 x 2-5/8" x 12ft LH Galvanized Red/White

  • Wire size: .331
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
GALV-283-2-144-R

Torsion Spring .283 x 2" x 12ft RH Galvanized White

  • Wire size: .283
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-250-258-144-R

Torsion Spring .250 x 2-5/8" x 12ft RH Galvanized Green

  • Wire size: .250
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-243-258-144-R

Torsion Spring .243 x 2-5/8" x 12ft RH Galvanized White/Yellow

  • Wire size: .243
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
OMJ-6112-M-N1-LH

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Monitored Circuit Board N1 Eyes Left Hand

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Floor level disconnect mechanism which must be engaged for manual push-up operation
  • 14 cycles per hour 50 cycles per day
    • .......more details
11.7135

Whiting Horizontal Track 2" x 135" L 6" Radius Roadside 1 Piece

  • 1 roadside horizontal track
MGH-6536-M-N1-LH

Manaras 2 HP 208V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
BEA-10EABA

BEA Bracket Accessory for Eagle Artek

BEA-10LIGHT-TG

BEA Modular LED Signal Light Segment Green

  • Signal lights for industrial and vehicle flow management applications.
  • LED signal modular lights offer customizable configurations with “build-your-own” lighting elements that share a common base and bracket.
  • These LED signal units are available in red green yellow and an audible alarm cap and can be stacked in a tower configuration with up to six modules.
  • Operating temperature: -40 to 122F
  • Nema 4/IP65
  • Base sold separately
    • .......more details
User GuideDatasheet
BEA-10LIGHT-TR

BEA Modular LED Signal Light Segment Red

  • Signal lights for industrial and vehicle flow management applications.
  • LED signal modular lights offer customizable configurations with “build-your-own” lighting elements that share a common base and bracket.
  • These LED signal units are available in red green yellow and an audible alarm cap and can be stacked in a tower configuration with up to six modules.
  • Operating temperature: -40 to 122F
  • Nema 4/IP65
  • Base sold separately
    • .......more details
User GuideDatasheet
15-50B22LGH

Sprocket 22 Teeth 1" Bore 1/4" Keyway w/SS

2400-416

Linear Dowel Pin .3752 dia x 2" Long

2100-1650

Linear Plate with Solid Pin V Groove

PRX-320

EMX Keypad/Card Reader Waterproof 5402-1

  • Up to 2000 users by card
  • Up to eight user pass codes by keypad
  • Low energy consumption ideal for solar applications
  • Built-in contact for doorbell annunciator
  • CE certified and is also ROHS compliant
  • Key Confirmation: Green LED On while key is depressed
    • .......more details
9003-200-15-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 2" Track Bolt On 15' Long - Black

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle bolt-on vinyl retainer.
  • Bolts onto reverse angle steel jamb.
Drawing
MPB-3

Doorlec Open Mushroom Stop Lockable Close Push Button Station

  • Green (Open) Red (Mushroom Stop) Black (Close) push-button station
2200-983

Linear Brake and Puck HSLG ***NLA Replaced by 2200-983-UPS

70225.000

Truck Door Todco 2" White Nylon Quiet Roller ** Price by Quote Only

GH-353-3

Doorlec Industrial Gearhead Door Operator 3HP 575V 3-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details
CGH755L5-LH

LiftMaster Gearhead with Brake and Carwash Mod 3/4HP 575V 3P L5 Left Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
202-0019

TNR Bottom Bar Arm Black Harness 75D ** Price by Quote Only

  • same as 2622126
2806.156.170

Whiting .156 x 2-3/16 x 17" Roadside with Cones

K20-3100M-5-H25

LiftMaster Electric Motor 1 HP 575V 3P L5

  • For use with various LiftMaster® Logic 5.0 Commercial Door Operators and Slide Gate Operators.
  • Also known as: 20-3100M-5 K20-3100M-5
BEA-10-IXIO-ST

BEA Presence Sensor for Automatic Sliding Doors

  • IXIO-ST is an effective versatile and easy-to-use presence sensor for automatic sliding doors.
  • It can be used for both clear door openings and side-lite protection
  • Precise infrared curtains coupled with visible alignment beams make the IXIO-ST extremely safe and easy to adjust.
  • This state-of-the-art sensor features an on-board LCD screen that streamlines the installation and setup processes.
  • Intelligent Solution :On board microprocessor optimizes data analysis monitors sensor performance and enables system integration
  • Mounting height: 6’6” – 11’6”
    • .......more details
FRONTIDLER006

Manaras Front Idler Assembly #41 Very Heavy Duty

  • MOD073
SPR410B12X1

Sprocket 410B12 x K1/4 2S 5/16-18 PH1/4

2376.187*29.900

Whiting Torsion assembly .187 wire size 29" spring length 90" shaft

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
2200-333

Linear Key 3/16 x 3/16 x 1-1/2

1104-18FT-CHI-CRM

Residential Side & Top PVC Weather-Strip with cap 18' Long - CHI Cream (C-C)

  • Cream rigid vinyl retainer with cream flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • CHI compaible colour
  • Full case quantity only (12).
GALV-312-334-R

Cut-to-Length Torsion Spring .312 x 3-3/4" Right Hand Wound Galvanized Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
  • Galvanized
GALV-375-6-144-LH

Torsion Spring .375 x 6" x 12ft LH Galvanized Yellow/Green

  • Wire size: .375
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized
K23-11442

LiftMaster Limit Switch SPDT w/Roller and Lever

  • Same as 23-11442
9-14-1

ARB Bracket 18-24" Adjustable Zinc Plated Half Hinge

  • Also known as Operator Reinforced Bracket
K19-40720D-NP

LiftMaster Chain #40 Nickel Plated 30ft

  • Includes (3) Master Links.
GALV-273-258-144-R

Torsion Spring .273 x 2-5/8" x 12ft RH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-363-334-144-L

Torsion Spring .363 x 3-3/4" x 12ft LH Galvanized Green/White

  • Wire size: .363
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-363-334-144-R

Torsion Spring .363 x 3-3/4" x 12ft RH Galvanized Green/White

  • Wire size: .363
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-262-2-144-R

Torsion Spring .262 x 2" x 12ft RH Galvanized Red/Yellow

  • Wire size: .262
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-273-258-R

Cut-to-Length Torsion Spring .273 x 2-5/8" Right Hand Wound Galvanized Orange/Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-295-334-R

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Galvanized Blue Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
GALV-363-334-R

Cut-to-Length Torsion Spring .363 x 3-3/4" Right Hand Wound Galvanized Green/White Price per Inch

  • Priced per inch - cones sold separately
  • For factory installed cones use part no. C-375-INSTALLED
GALV-207-2-L

Cut-to-Length Torsion Spring .207 x 2" Left Hand Wound Galvanized Brown Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
K29-PB125

LiftMaster Reversing Motor Controller 115V KBPB-1

B680H

FAAC Barrier Gate System ** Price by Quote Only

OGH-6534-M-N1-RH

Manaras 1 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
BEA-10FALCN-EX100

BEA Falcon Motion Detector w/Exp Proof Housing 100ft Cable

  • FALCON EX combines a microwave activation sensor with an explosion-proof / flame-proof housing
  • Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
  • FALCON EX can be mounted from 11.5' to 23' to fit any industrial application.
  • Nema4/IP66
  • Detection Zone: Falcon EX: 13’×16’ at 16’
  • Oerating termperature: -22-140F
    • .......more details
227967

Linear Door Arm Bent LCO75

EGRESSKIT001

Manaras Egress Device + Hardware

OSH-6212-M-N1-LH

Manaras Opera-SH 1/2 HP 240V 1Ph Monitored w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation Manual
GAREX-PAINT-R12-WHTE

Garex Touch-Up Paint White for R12

TS125

Wayne Dalton Thermospan 125 Steel Panel

  • Wayne Dalton’s Thermospan® Model 125 sectional door features a foamed-in-place polyurethane core
  • Standard joint seal that provides a substantially higher thermal efficiency than industry standard polystyrene insulated doors
  • The Wayne Dalton Thermospan® Series doors are the only sectional doors in the industry with patented roll-formed integral struts on each section making them the most rigid doors available
  • Thermospan® Model 125 is suitable for commercial and industrial applications.
BEA-10-WBA

BEA Universal Mounting Bracket

  • Extendable from 15.35" - 23.62"
  • -90 to 90 degree tilt range
  • Self Drilling screws provided
  • Carbon Steel Black Powder Coated
Installation Guide
MC22-2WIRE-RH-BLK

Miller Edge MC22 2-Wire Non-Monitored Right Hand Black Includes Funny Flaps - Sold per Foot

  • Electromechanical sensing edge for use on Cornell doors. •The MC22 is manufactured to exact specifications. •The MC22 is completely flexible and will contour to curved surfaces. •Touch sensitive signaling allows immediate reversing or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Vertical or horizontal mount •One year warranty
Worksheet
IRB-RET2-KIT

EMX Industries Universal Retroreflective Photoeye Nema 4X W/Reflector Hood New UL325

  • Universal UL325 Retroreflective Photoeye Kit
  • Compact design
  • Easy LED alignment
  • Easy-to-Adjust Ball & Socket Bracket
  • Rugged NEMA 4X enclosure
  • Integrated sensor hood improved reflector hood and ball & socket bracket
    • .......more details
Manual IRBRET2Spec Sheet IRBRET2
K76-34644

LiftMaster APS Encoder 24V

  • Compatible with various LiftMaster® Commercial Swing Gate Operators
NO_REFLECTOR

Garlo Gavazzi No Reflector Required

DHJ751L5-RH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 3/4 HP 115/230 VAC Logic 5 Right Hand***Discontinued

  • Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
  • Optimal for shopping mall applications with heavier rolling doors and grilles.
  • Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
  • Industrial Ball Bearings on 1" Output Shaft
  • Second Floor-Level Disconnect for Manual Lifting in an Emergency
    • .......more details
2022691

FAAC Control Board for Model 741

MGH-6236-M-N1-RH

Manaras 2 HP 208V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
LVB420-11/P1

Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
Specification Sheet
27025

Doorlec Electric Motor TEFC 1 HP 115/230V DC101C

BEA-10-IXIO-DT1

BEA Sliding Door Sensor

  • Dual technology motion and presence sensor combining microwave activation and infrared presence detection for the automatic sliding door industry.
  • This solution is highly flexible and user-friendly for sliding doors industrial doors vehicle gate detection and off-door automation.
  • Precise Presence Detection: Two 24-spot high-density infrared safety curtains providing precise presence detection
  • Easily Adjustable: Four visible red alignment spots are projected on the ground to assist in precise IR curtain adjustment
  • Standards Compliant: Fully monitored internally capable of external monitoring
  • Operating temperature: -13 to 131F
    • .......more details
BEARING007

Manaras Flange Bearing ID 1"

  • Flange bearing for 1" shaft
PCBA-PD3.3

Dyna Hoist/Pulse Replacement Drive Board for DC500-100

K07-8007

LiftMaster Arm Hub for BG770/790

  • Also known as: G078007 07-8007 078007
OGH-6533-M-N1-RH

Manaras 3/4 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
CRBH755L5-RH

LiftMaster 3/4 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 with Carwash Modification

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
PHOTO-076

Manaras Reflector 2" x 2" For Use w/ PHOTO-075

1104-18-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 18' Long - Dark Sandstone (DDG)

  • Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
GDI-HB340

GDI Direct Drive & Jackshaft HAML-RBH-A830 Nema 4 To Accept 1" Shaft Non Monitored

  • Compact & Light Weight - Fast Installation
  • Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
  • Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
  • One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
  • Soft start soft stop
    • .......more details
GDI-TLG51

GDI Trolley Kit Add-On Feature

  • This is an add-on feature to the JDMG operator
  • Includes: Trolley brackets traveller idlers arms
GDI-LG940

GDI Jackshaft & Trolley JDMG-LG-A830 Nema 4 Non Monitored

  • Low Headroom at 4-3/4" (Trolley)
  • Dimensions: 11.35" x 4.3" x 4.3"
  • Motor type: Brushless DC
  • Max cyles: Open/Cose per day = 3200
  • One operator can handle all AC voltages - Single phase and three phase
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
    • .......more details
GDI-LG930

GDI Jackshaft & Trolley JDMG-LG-2030 Nema 1 Non Monitored

  • Low Headroom at 4-3/4" (Trolley)
  • Dimensions: 11.35" x 4.3" x 4.3"
  • Motor type: Brushless DC
  • Max cyles: Open/Cose per day = 3200
  • One operator can handle all AC voltages - Single phase and three phase
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
    • .......more details
PRO-JB-7553-U

Micanan 3/4HP 575V 3P Jackshaft with Brake Mon ECB N1 Eyes Universal Mount

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake included recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
GHW-353-2-RH

Doorlec Ind. Duty Jackshaft Carwash Op. 2 HP 575V 3P Right Hand

  • With DC2000 logic board
  • Worm-Gear Jackshaft type Industrial operator NEMA 4/12