Devanco Canada - Get The Right Garage Door Opener‎ and Parts

99552NYHNG

Nylon Hinge Black #2 *** To extent of inventory

Equivalent to 14-ga in strength

SSZP12-6

Solid Shaft 1" Keyed Zinc Plated 12'-6"

H755L5-LH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 575 VAC 3 Ph Logic 5 Left Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

MOUNTSHAFT007

Manaras Clutch Shaft Kit for MTBH with 5/8" Shaft

For operators made with a 5/8" shaft
For very old model MTBH built with 1" shaft - use part number MOUNTSHAFT017

Drawing

20235R.S

Genie Replacement Keypad Only with Ribbon

Replacement keypad for KEP-1

71B240G

LiftMaster Brake Kit 230/240V with Solenoid Field Install SL585 and SL595

Instruction Manual

41D216

LiftMaster End Panel with all Labels and Light Socket

End panel that goes on model 8355
For the circuit board order 45ACT

7001-7-CREAM

Commercial Side & Top Weather-Strip 7' Long - Cream 7001-CC (C)

Cream galvanized steel with cream dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Almond
Full case quantity only (20)

7001-16-SANDSTN

Commercial Side & Top Weather-Strip 16' Long - Sandstone (D)

Sandstone galvanized steel with sandstone dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Taupe
Full case quantity only (10)

719323

FAAC Steel Rack for Model 844 Operator

MOFR-M14-8

Carlo Gavazzi Photoelectric Sensor Thru-Beam Receiver

Maximum sensing range is 20 meters
11-Pin
8 inch optical beam angle.
Waterproof for harsh environments i.e. water dust steam etc.
To be used with amplifier series S142
Supplied with 15 m of shielded cable.

.......more details

Installation Manual

37024R

Genie Rail Extension Kit for 8' Doors GBLX-8***No longer available***

Compatible with Quiet Lift 800 DC Belt Drive models.
To be used in addition to a 7' (3-piece) rail to accommodate an 8' high door.

94-61180-33-84

Truck Door 2" Steel Roller 6" Stem for Whiting Roll-Up Doors

open-bearing roller

CONSD24V

Reversing Contactor Struthers Dunn 24V

Struthers-Dunn # A275KXX90

K75-10177

LiftMaster Brake Hub Assembly

Assembly includes: Brake hub set screw push-on fastener and feather key

UCF-1

Self-Aligning Cast Flange Bearing 1" Bore UCF205-16

Grey cast iron painted.
Comes with 2x set-screws 1/4-28
Square 4 bolt

PED42

Pedestal Post 42" Gooseneck Pad Mount

Black powder coat finish
Faceplate with universal hole pattern to fit almost any access device
2" x 2" square post
Neck is bent with 6 in. center radius giving a tight professional look
Same as G559

M3-2314

Marantec 4-Button Transmitter 315 MHz 97244/122468

Same as part # 65893 and 97244
Visor mount
Includes battery CR2032
Made in Germany

Instructions

MU22-2WIRE-LH-B

Miller Edge MU22 2-Wire Left Hand Black - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

990LM

LiftMaster Surge Protector ** NLA

Installation Manual Manuel d'Installation

41AC050-2

LiftMaster Electronic Circuit Board Assembly 315MHz

Fits 3265 PD612C
Replaces 41AC150-2 (board only - need to install on exisiting panel)
Also known as 41AC050 41AC050-2M

41A6118

LiftMaster Travel Module (3800) *** No longer available To extent of inventory

Fits model 3800 confirmed with LiftMaster Tech support.

Programming Instructions

DS-KIT

Linear Single Delta Radio Kit ** Discontinued

Kit includes one DT transmitter and one DR receiver
Same as: DNP00011
Operates on 24 VAC power
One channel
Codes: 1024 (set by dip switches)
RF frequency: 310 MHz

.......more details

Installation Manual

SPREADER002

Chain Tensioner for 1" / 1-1/4"

Chain spreader for installation with 1" operator shaft and 1-1/4" door shaft
Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing

Installation instructions

71-90503000

LiftMaster Non-Resettable Counter Field Kit

A 6-digit non-resettable 24VAC electro-mechanical counter is mounted in the operator control enclosure.
This devise counts the number of times the CLOSE coil is energized or whenever the operator reaches an auxiliary open limit switch.
This corresponds to the number of complete door cycles of use.

Installation Manual

Z9003-MAX

Pusher Spring - 27" with 3" diameter Tip Sold as a Pair

Pusher spring 27" long with a large 3" tip. Sold as a pair
11lbs of initial pushing strength per spring+ 3lbs per inch per spring

DTG

Linear Delta3 Safety Edge Transmitter 310 MHz

Activates one Delta-3 receiver for remote stop or reverse safety edge
No cables or coiled wires
Mounting screws (4) supplied
Power: 9-volt battery
Codes: 256 (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

ACT-31B

Linear 1-Channel Block Coded MegaCode Key Ring Transmitter 318 MHz (ACP00879)

Compatible with all Linear access receivers and controllers
Supplied with quick-disconnect key ring
Power: Two CR2016 batteries incl.
Codes: Factory block coded in MegaCode format
RF frequency: 318 MHz
Dimensions: 1.25" W x 2.25" H x .48" D

.......more details

Programming Instructions

AW-12A

Miller Edge Air Wave Switch in NEMA 4 Enclosure

Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion
Sensitivity: 2mm to 500mm
Ambient temperature range: -49F to 180F

.......more details

Instructions Manual Sell Sheet

15-50B18LGH

Sprocket 18 Teeth 1" Bore 1/4" Keyway

PRO-W_MOD

Micanan Nema 4/12 Modification

This modification provides a TEFC motor N4/12 watertight/oiltight control enclosure waterproof drive and limit chain NEMA4 thru-beam eyes and a watertight/oiltight three-button station.

821LM

LiftMaster MyQ Garage Universal Smartphone Garage Door Controller

Enables smartphone control of most major brands of garage door opener with photoeyes.
Includes Wi-Fi hub and door sensor

Installation Manual Manuel d'Installation Sell Sheet Brochure

50-104-1

Black Coil Cord 2-Wire 18-ga 20 ft. Extended Curly Cord

Retracted Length=4 Feet Extended Length=20 Feet 2 Wire 18 Gauge Cord Type SJEO

50-104-2

LiftMaster Orange Coil Cord 3-Wire 18-ga 20 ft. Extended Curly Cord

975LMC

LiftMaster Laser Parking Assist ** To extent of inventory

Works with Chamberlain (LiftMaster) Garage Door Openers
Easily connects with two wires to the photocell terminals of the opener
The Laser light turns on as you drive into the garage
Simply Adjust the light to a specific spot on the dash

Installation Manual Manuel d'Installation

GREASE

Gear and Rail Grease 3/4 oz Tube *** No Longer Available

A low temperature lithium based grease
To avoid tooth wear premature failure and temperature rise caused by friction by promoting sliding between teeth

83A11-2

LiftMaster Lithium Grease 0.5 oz Tube

Same tube of grease as in the 41C4220A kit
USE PART NUMBER: GREASE same grease larger tube less expensive
Same as K083A0011-1 83A11-2 83A14 83A4 83A8 083A0011-1 083A0011-2 83A11

02-403P

Push Button Control Station 3-Button Surface Mount NEMA 4/12 O/C/S Green Black Red

Open/Close/Stop allows complete control of the door.
Compatible with all commercial door operators.
NEMA 4 4X 12 13
Outdoor surface mount station with polycarbonate enclosure part # XALD03H7

Sell sheet

882LMW

LiftMaster Multi-Function Control Panel Wi-Fi

Push button for garage door operation
Program remote controls Wi-Fi Garage Door Openers and MyQ® enabled accessories directly from the control panel
Light run-time is 4 1/2 minutes with adjustable light timer option
Lock feature designed to prevent operation of the door from portable remote controls
Compatible only with LiftMaster® Security+2.0™ and Wi-Fi garage door openers
Equivalent to Chamberlain's 41A7185

.......more details

Programming instructions Instructions de programmation

02-407

LiftMaster Key Switch Assembly On/Off Nema 4/12

Two-position keyswitch. Key removable in either position.
Surface Mount
May be used on all operators
Die-cast metal enclosure non-tamperproof

02-111

LiftMaster Pull Switch Assembly *** Available to Extent of Inventory

Swivel end
Nema 1
Same as Pull Cord

41A5021-1ATS

LiftMaster Circuit Board Assembly (41A5021-1HATS)

Board: Security+ 390 MHz
Assembly includes: circuit board and end panel
Also includes: 1 Multi-Function wall ctrl panel - 2 wire
For: ATS211 & ATS211R
For newer model ATS use replacement board 41A5021-9G-315
Same as 041A5021-1HATS

.......more details

50-106

Take-Up Reel 2-Wire Metal 18-ga 20ft

18-gauge
20 ft extended
Take up reels are NOT recommended for use with any failsafe type edge. Use coil cord only.
Also called Reel cord

7001-14-W/B

Commercial Side & Top Weather-Strip 14' Long - White and Black (WB)

White galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

DTKP

Linear Delta-3 Wireless Keyless Entry 310 MHz

Activates multiple Delta-3 receivers
1-8 digit PIN
Backlit keys for easy viewing
Mounting hardware supplied
Power: 9-volt battery
Codes: 256

.......more details

Programming instructions

CR2032

Maxcell 3V Lithium Button Cell

ME123-YELLOW-LH

Miller Edge Yellow Left Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

ME112-L

Miller Edge Black 2W Non Monitored LH Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors and gates.
Retrofits easily to 1" to 1-1/4" sectional doors
Touch sensitive signaling allows for immediate stopping/reversing of motion
For sectional doors: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order
Lead wire: 22 gauge univversal

.......more details

Installation Manual Worksheet Sell Sheet

ME113-R

Miller Edge Black Right Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors
Retrofits easily to 1-1/4" to 1-1/2" sectional doors
Touch sensitive signaling allows for immedita stopping or reversing of motion
For a sectional door: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order.
Lead wire: 22 gauge universal

.......more details

Installation Manual Worksheet Sell Sheet

377LMC

LiftMaster Wireless Keyless Entry 315 MHz ***Replaced by 878MAX

Compatible with Liftmaster Sec+ garage door openers commercial door operators gate operators and radio control receivers
Mounts easily to the door jamb with two screws
Compatible with openers built 2005+
Replaces 376LMC and same as Chamberlain 956D same as 377LM
Includes 9V battery

Programming Instructions Instructions de programmation

886LM

LiftMaster Motion-Detecting Control Panel Sec+ 2.0 *** To extent of inventory

Push button for garage door operation
Motion-detector automatically turns on the light when movement is detected
150 degree sensing angle for motion sensor
Program remote controls directly from the control panel
Light run-time is 4 1/2 minutes with adjustable light timer option
On/Off switch for deactivation of motion-detecting function

.......more details

Installation Manual

.306_6"-LH

Torsion Spring .306 x 6" x 12ft LH Red

Wire size: .306
Inside diameter: 6"
Length: 12 ft

.243_3-3/4"-LH

Torsion Spring .243 x 3-3/4" x 12ft LH White/Yellow

Wire size: .243
Inside diameter: 3-3/4"
Length: 12 ft

71-B120H

LiftMaster Interior Brake Kit with Cable 115V (Logic 3 4 and Models)

Interior mount brake kit for operation with chain hoist
Works on mechanical operators as well as logic 2 3 4 and early logic 5 motors.

Instruction Manual

41B5424

LiftMaster Belt Idler Pulley and Bracket (Built Years 2000+)

This is a Belt Pulley Bracket Replacement Kit. For use with various LiftMaster® and Chamberlain® Belt Drive Garage Door Openers that utilize a T-rail
Fits models: 2500 2580 3280 3850 3500

T-833-C

FL-Allstar 3-btn 9-Door Transmitter 109023-311 MHz***NLA

This nine channel transmitter controls up to nine doors (open-close) or three doors (open-close-stop).
It has a height switches encoder with three positions: + 0 and - .
Manufacturer's model number: 8833TC (190-109023)
Dimensions: 4 5/8" x 2 1/4" x 7/8"

Programming Instructions

41DJ001

LiftMaster Circuit Board with Plate for 3800 3900 41DJ001B

Board: Security+ 315 MHz
For jackshaft models; 3800 3800P 3800PLD & 3900
Also known as 41DB001-2

Programming Instructions Instructions de programmation

144C56

LiftMaster Idler - Cable Pulley for chain drive

For square rail assemblies
Same as 144C0056

.421_3-3/4"-RH

Torsion Spring .421 x 3-3/4" x 12ft RH Gold

Wire size: .421
Inside diameter: 3-3/4"
Length: 12 ft

.295_1-3/4"-RH

Torsion Spring .295 x 1-3/4" x 12ft RH Blue

Wire size: .295
Inside diameter: 1-3/4"
Length: 12 ft

LYNX-WALLSTATON

Lynx Deluxe 3 function Wall Station

Features light and lock function
Vacation switch de-activates remote controls & keyless entry
Works with Lynx residential openers built from 2000 +
Comes with wire and mounting hardware

Installation instructions

CP-SW-MIC

Lynx Limit Switch for Commercial Operator with Logic Board

Single limit with curved actuator lever
Switch attaches directly to the Logic 6000 board

OSH-6532-ECB

Manaras Opera-SH 1/2HP 600V 3Ph with Electronic Circuit Board ** To extent of Inventory

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"

Installation Manual Sell Sheet

OPH-6113-ECB

Manaras Opera-H 3/4HP 120V 1Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

MOUNTSHAFT001

Manaras Clutch Shaft Kit for MJH (pre-1998)

Input / clutch shaft kit for MJH models up to mid-1998
Kit includes V-belt 4L360 to fit with newer deeper pulley
For MJH built after 1999 use MOUNTSHAFT001A

Drawing

DISCONNECT001

Manaras Floor Level Disconnect Lever

DOORARM001

Manaras Door Lifting Arm Assembly

Complete door arm assembly for all Manaras trolley operators.

RADIO-KIT004

Manaras plug-in receiver for Board 70 operators 390 MHz

Direct ECB plug-in receiver card kit (RADIO-RE101C) for adding or replacing on-site.
Maximum 16 transmitters per receiver.
Compatible with transmitters RADIOEM101 and RADIOEM103 SD/MD

RADIO-42

Manaras MCT-4 3-btn O/C/S transmitter 4 doors 313 MHz **Replaced by RADIO-EM932 or MV-00024

Open/Close/Stop remote for 4 doors.
By selecting A B C or D on the rotary switch you can operate any of the four doors.
Comes with LED battery life indicator.
9V battery included.
Can be wall or post mounted.
Must be used with 4 MCR series receivers.

.......more details

Programming Instructions

2704.162_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .162 x 2-3/16" x 18" Long
For Curbside order part # 2705.162*180

2235.296

Whiting Coldsaver Bottom Panel 14-1/2" x xxx" with lock seal and retainer (Max 96")

Fits Coldsaver Roll-Up Doors
1-1/8" thick max 96" wide
Includes Lock and keeper

9931T

Allstar 1-btn Transmitter 108787 318 MHz ***Replaced by P-9931T

Compatible with Allstar and MVP receivers
Visor mounting clip supplied
Power: 9-volt battery
Codes: 19683 (set by nine trinary dip switches)
RF frequency: 318 MHz
Dimensions: 2.25" W x 4.625" H x 1" D Order number: 190-108787

.......more details

Programming Instructions

831-R

Allstar 1-Door O/C/S Receiver 107480 318 MHz ** To Extent of Inventory

Three channels - three relay outputs
Textured aluminum case
Terminal strip for wiring
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC

.......more details

Programming Instructions - Dip Switch Version Programming Instructions - Learn Button Version

DRQP

Linear 1-Channel Delta3 Gate Receiver 310 MHz ** Available to extent of inventory

1-Channel Gate Receiver
High-sensitivity short-range radio receiver
Operates in conjunction with the 9-inch local antenna (supplied).
Designed for use with automatic gate operators or systems where a remote antenna is needed.
Same as: DNR00013P