Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
99552NYHNG

Nylon Hinge Black #2 *** To extent of inventory

  • Equivalent to 14-ga in strength
29-31229

LiftMaster Relay 24VDC C Relay 1-Phase only

  • C-relay for model T operators 10A
AW14-RF-K10

Miller Edge Wireless Air Wave Switch Transmitter/Receiver Kit

  • AW14-RF is the AW14 air wave switch with a transmitter embedded within the switch enclosure and the receiver wires into the operator.
  • There is no need to hardwire coil cords or retracting reels which saves installation time and improves visual aesthetics.
  • The AW-14-RF-K10 switch kit includes a MRF-01 receiver which is wired to the motor controls.
  • Battery is included # CR2032
Installation ManualSell Sheet
SSZP11-6

Solid Shaft 1" Keyed Zinc Plated 11'-6"

SSZP12-6

Solid Shaft 1" Keyed Zinc Plated 12'-6"

6X42PO50

Devanco Loop 6' x 42' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
CAR2U-RPTR

LiftMaster Lear CAR2U Repeater *** No Longer Available

  • The Lear Car2U® repeater kit allows compatibility between new Chamberlain® Sears Craftsman® or LiftMaster® Garage Door Openers and the Car2U system in your vehicle. · The Car2U system is a garage door opener integrated into your vehicle. · The Lear Car2U kit contains a transmitter and a detailed instruction manual.
Programming Instructions
02-409B

LiftMaster Key Switch with Best Cylinder

  • Two Position Key Control Station
  • Outdoor Surface Mt. (NEMA 4/12)
  • Tamperproof
  • Die cast metal enclosure with BEST cylinder (construction core included)
  • OPEN/CLOSE spring return to center (OFF) key removable in center position only. Should only be used on operators wired for constant pressure to open and close (all LiftMaster industrial operators with type D control wiring).
  • Dimiensions: 3" x 3.2" x 4.2"
    • .......more details
MT22-BLACK-LH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

  • Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
Installation ManualWorksheetSell Sheet
K001D8073-1

LiftMaster Three Phase Relay/Power Board 230/460V (K001D8397)

  • For Logic 5 commercial operators
  • 014D1279E
  • New part number K001D8397
75-10174

LiftMaster Trolley- Front Idler Assembly

  • Also known as: 7510174 305115018 711150181 175017 71115211 75-10174
772

Fasteners Lag Screw Hex Washer High Profile 5/16" x 2" 1000/Box *** Temp. NLA

  • 7/16" Head
  • Hex washer high profile head
H751L5-LH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 115/230 VAC Logic 5 Left Hand ***Replaced by the RBH751-LH

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
10-10882

LiftMaster Chain Guide *** No Longer Available Sold only as a kit

  • Fits model H operator with Logic 5
  • This item is now only sold in a kit. To order use code K72-19979
K001C8103-1

LiftMaster L5 Antenna

LC2D129B7

Contactor Telemecanique 24V ** Discontinued

S2TR2641E2M

Erone 2-Channel Master Transmitter 433MHz

  • One master transmitter is required for each multi-user receiver for doing the programming.
  • Range in open space: 850ft or 250 m
  • One 12V lithium battery included
  • Bronze body with yellow buttons.
Sell SheetBrochureWireless System Chart
178B35

LiftMaster Curved / Bent Arm Kit (41B0035B)

  • Will work with most residential garage door openers
  • Also known as: 4178B0035B 178B32 41B0035B 4178B35 178B35 012385990357 178B35B
UTIL013

Utility Switch Roller Lever Arm *** No Longer Available

  • Telemecanique # ZCKY-41
26-94623

Truck Door Top Panel (13" x 98") for Whiting DryFreight

  • These panels are cut to an extra wide width to fit wider vehicle applications
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • .75" thick 7 ply exterior grade medium density plywood
  • Primer finish
ME123-BLK-END

Miller Edge Black End Outlet 2 -Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
71B575G

LiftMaster Brake Kit 575V with Solenoid Field Install SL585 and SL595

  • Kit comes complete with: Brake hub kit brake release lever brake disk spring cup studs compression springs brake solenoid solenoid cover spacers mounting plate pressure plate feather key and conduit.
Instruction Manual
41D216

LiftMaster End Panel with all Labels and Light Socket

  • End panel that goes on model 8355
  • For the circuit board order 45ACT
MA021

LiftMaster Nylon Arm Nuts 50/Pkg

  • For barrier gate models MADCBB MATDCBB MASDCBB & MASTDCBB
41DB001-1

LiftMaster Circuit Board Assembly

  • For belt drive unit model 3500 (315MHz)
  • Assembly includes: Board end panel and light socket
  • Also known as 041DB001-1C
7001-8-CREAM

Commercial Side & Top Weather-Strip 8' Long - Cream (C)

  • Cream galvanized steel with cream dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Almond
  • Full case quantity only (20)
7001-18-SANDSTN

Commercial Side & Top Weather-Strip 18' Long - Sandstone (D)

  • Sandstone galvanized steel with sandstone dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (10)
7001-10-SANDSTN

Commercial Side & Top Weather-Strip 10' Long - Sandstone (D)

  • Sandstone galvanized steel with sandstone dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (20)
7001-9-SANDSTNE

Commercial Side & Top Weather-Strip 9' Long - Sandstone (D)

  • Sandstone galvanized steel with sandstone dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (20)
ETB-311-1/2HP

Doorlec 1/2HP 115V Trolley Door Opener TEFC Motor

  • Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.
  • DC2000 Logic Controller
  • Comes with standard O/C/S push button station
719323

FAAC Steel Rack for Model 844 Operator

MX00037

Micanan Brake Assembly for PRO-J/H Solenoid NOT included

  • Brake assembly does NOT include the solenoid
9150000701

Safety Cable for Extension Spring 3/32" 7x7 10' Sold as a Pair

  • Looped on one end the other is raw (no stops)
  • Used to wrap around the body of an extension spring to contain the wire should the spring break.
9150000670

Extension Cable 1/8" 7x7 14' Sold as a Pair

  • Cable assembly for extension spring door - looped one one end the other is raw (no stops)
753

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 1" (#3PT) 1000/Box

  • Indented Hex Washer Head
  • 7/16" Head
  • Max RPM = 2000
  • #3 point = long cutting edge (less thread)
1104-18FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 18' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Full case quantity only (12).
1104-7FT-GREY

Residential Side & Top PVC Weather-Strip with cap 7' Long - Grey (G)

  • Grey rigid vinyl retainer with grey flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
27-20100

Truck Door T-Style Spring Assembly 60" Long

  • Wire thickness: .24"
  • Inside diameter: 1.75"
  • Includes bolt plug and winding plug wound onto spring for stronger design
  • Cross reference: T#51042 W#2701
8FT-CHAIN-LDO

Linear 8ft Chain Rail for LD050/LS050/LDCO (HCT8C)

  • 8ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 & CHCR-8 carriage house I-rail conversion kits
41A7619-5

LiftMaster Cover for 8355

SEDK2641A4

Erone Wireless Radio Keypad 433 MHz

  • Wireless RF Digicode® keypad.
  • Frequency: 433.92 MHz.
  • For automatic door opening in sequential mode.
  • 6 channels to control 6 different relays or 6 different RF receivers.
Programming InstructionsWireless System Chart
49564

Stanley Chain Drive Traveler

  • Compatible with all Stanley chain drive units from 1982-present
  • Not compatible with C-Channel models
  • Same as part no. 3701965 3703375 3702540
  • If trolley slider no. 24851 is also required order part number 49563
Installation InstructionsInstructions d'installation
CR-2149

Universal Photocells

  • Will work with all major brands of residential openers including: Chamberlain Liftmaster Craftsman Overhead Stanley Wayne Dalton Linear Raynor and Moore-O-Matic
  • The self programming feature allows you to simply hook up to the existing wiring
  • Suggested replacement for Stanley 49522 - must cut black wire
Installation Manual
12-000I

Secure Brands Keypad with Intercom Post Mount

  • Post mount with Intercom
  • RemotePro KP 26 bit wiegand output keypads
  • Available in three different mounting configurations: post single gang or flush.
  • All single gang RemotePro KP models are available with a silver aluminum faceplate.
  • A heavy duty metal keypad is used with all exterior models providing years of trouble free entry.
  • Post mount models feature a stainless steel faceplate in a heavy metal powder coated enclosure with nightlight.
    • .......more details
510.5920.06

Whiting Stainless Steel Rivets Option for Dry Freight Door 5-Rows of Hinges 6 Panels

  • Upgrade option
EL25G

LiftMaster Telephone Entry System Gray

  • Capable of accepting up to 2000 codes
  • 4 assignable and programmable built-in relays
  • Mounting versatility and available in 3 colors: Gray Nickel or Silver
Installation ManualSell Sheet
M3-2314

Marantec 4-Button Transmitter 315 MHz 97244/122468

  • Same as part # 65893 and 97244
  • Visor mount
  • Includes battery CR2032
  • Made in Germany
Instructions
GITR-3

Genie Intellicode 3-Button Remote 37517S 390 MHz *** To extent of Inventory

  • Replaces Series II GIT-1 GIT-2 & GIT-3
  • Battery Instructions Visor Clip Included
  • Note: Only the far right of the three buttons (1 dot button) will operate those older Genie Intellicode units built from 1995 through 1997.
  • If you have a Genie unit built in 1995 1996 or 1997 this is the only remote that Genie presently makes to operate the Genie garage door openers built during these years.
  • In this special case the remotes can only be used as 1 button remotes and no other multi-button Genie remote is compatible.
Programming InstructionsInstructions de programmation
3001-0

Signal Tube Treadle Hose Black Sold per foot

  • Applications: for gas stations and apartments
  • I.D. : 3/8"
  • Also known as Drive Over Hose.
990LM

LiftMaster Surge Protector ** NLA

Installation ManualManuel d'Installation
41AC050-2

LiftMaster Electronic Circuit Board Assembly 315MHz

  • Fits 3265 PD612C
  • Replaces 41AC150-2 (board only - need to install on exisiting panel)
  • Also known as 41AC050 41AC050-2M
25-10301

Truck Door Heavy-Duty Cable Anchor Bracket Black for Whiting Roll-Up Doors

  • Steel construction
  • Allows proper rotation of cable head
  • Cross ref: Whiting 5803
OES-SD16

LiftMaster Optical Edge System 16ft

  • Sectional door edge kit 16ft (4.9M)
Installation ManualManuel d'InstallationSell Sheet
CARX-20

EMX Accessory Access Card 5404-1

  • 3.4" x 1.2" x 0.1" (ISO standard size)
  • Reinforced for long life
  • Mifare 26 bit Wiegand Format
  • Durable access card for use on the CR-2000 and PRX-320
  • Easy and convenient use - just swipe in front of sensor
  • Secure and can be disabled individually at any time
    • .......more details
MDT-4A

Linear 5-Channel Visor Transmitter MegaCode 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Superior transmission range
  • Factory programmed MegaCode format supports over 1000000 codes
  • Unique ”Extra” top button
  • High visibility operate LED
  • Visor clip included
    • .......more details
Programming Instructions
SMDRG

Linear 1-Ch Gate Receiver MegaCode 318 MHz *** No Longer Available

  • High gain superheterodyne receiver
  • High RFI immunity
  • Supplied with F-connector whip antenna and mounting bracket
  • Memory: storage for up to 40 MegaCode transmitters
  • Power: 24 VAC/VDC
  • Codes: 1000000+ (MegaCode format)
    • .......more details
Programming Instructions
K74-31243

LiftMaster Kit SVC MOV

08-11013

LiftMaster Bevel Gear 3/4" ID

  • Fits the LiftMaster GH operator
STRUT-2-1/4-18'

Door Strut 2-1/4" Hemmed 18ft Long

  • Reinforcement bar 2-1/4"
25605R

Genie Inner Slide Kit for Chain Drive Models

  • The innerslide attaches to the chain and connects the carriage to the chain
  • Works on the following Genie and Overhead Door models:
  • IC250 PMX80 PMX500-IC/B IC250/B PMX85 ALC Series PMX60 PMX300-IC/A RCD Series PMX65 PMX500IC/A PMX75 PMX-IC/B
  • SP99 – SP SERIES LD100-500-100A-550A LAD125-555
  • CM6000-6000A-60-70-80-60S
  • OHD-696 696CD + Others
    • .......more details
GC-100

Devanco Foaming Glass Cleaner 538g

  • A powerful foaming glass cleaner goes on thick does not run and wipes off clean
  • Does not leave streaks or an oily film on the glass
  • Virtually odorless
Safety data sheetFiche de données de sécurité
59LMC

LiftMaster Outside Keyswitch ** To Extent of Inventory

  • 12 tumblers provide double locking action
  • Self cleaning barrel weather-resistant aluminum plate
  • Cannot be shorted out from exterior with key
  • One "NO" contact used to activate the door operator
  • Includes two keys
Installation Manual
MJ7104

Doorlec Utility Switch 21800

  • Utility switch with a 'NO' and a 'NC' contact
  • Adjustable arm with roller
3AG3

Miniature Fast Acting Glass Fuse 3 Amp 250V (5/pkg) - 766124

  • 6 x 30mm miniature fast acting glass fuse
  • Rated voltage: 250V
  • Rated current:3A
  • ROHS compliant
MWRTA12B

Miller Edge Wireless Transmitter with Audible Alarm and 1 Channel Receiver

  • For 2-wire edges
  • Was previously MWRTA02A now has a new board making installation easier
  • Includes single channel receiver (MWR12A) and transmitter (MWTA12) with audible low battery alarm.
  • This feature that activates when the battery has only 25% of its life remaining indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals.
  • The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.
1013-1-1/4-24'

Rigid Vinyl Bottom Retainer L-Shaped 24' Long

  • For door thickness: 1-1/4"
76-G0537

LiftMaster Alarm Assembly Kit for SL540/580

Installation Manual
1013-1-1/4-14'

Rigid Vinyl Bottom Retainer L-Shaped 14' Long

  • For door thickness: 1-1/4"
Z9003-MAX

Pusher Spring - 27" with 3" diameter Tip Sold as a Pair

  • Pusher spring 27" long with a large 3" tip. Sold as a pair
  • 11lbs of initial pushing strength per spring+ 3lbs per inch per spring
CPS-3

LiftMaster Option Card with CPS-L Eyes

  • For applications requiring two sets of photoeyes ( CPS-III)
Installation Manual
15-50B18QGH

Sprocket 18 Teeth 1-1/4" Bore 1/4" Keyway

41A7756

LiftMaster End Panel with Light Socket for 8557

PRO-W_MOD

Micanan Nema 4/12 Modification

  • This modification provides a TEFC motor N4/12 watertight/oiltight control enclosure waterproof drive and limit chain NEMA4 thru-beam eyes and a watertight/oiltight three-button station.
RS1029

Roller 2" Steel 9" stem- WL 10 ball

  • Steel Roller Wheel Diameter: 2"
  • Working Length: 9.5" Overall Length: 10.5"
  • Box qty: 100 Box weight: 60 lbs (2-9-10 WL steel)
029C98090

T-Style Complete Replacement Door White Stainless Steel Pkg 029C98090

  • Manufactured to exact size fully assembled tracking and spring assembly included.
  • Price varies according to size
821LM

LiftMaster MyQ Garage Universal Smartphone Garage Door Controller

  • Enables smartphone control of most major brands of garage door opener with photoeyes.
  • Includes Wi-Fi hub and door sensor
Installation ManualManuel d'InstallationSell SheetBrochure
41A7114-7

LiftMaster Travel Module (41D8071-4)

  • For model: 8550W & 8160
  • Same as 41D8071-4
Installation ManualManuel d'Installation
ME00003

Micanan Clutch Shaft Only for Pro-T/TB 3/4" x 11-3/4" No Kw 1" Thread

EXTANT

LiftMaster Coax Antenna Connection Kit JF

  • For use on Medium-Duty commercial operators only
Installation manualManuel d'installation
50-104-2

LiftMaster Orange Coil Cord 3-Wire 18-ga 20 ft. Extended Curly Cord

86-CP05-108

LiftMaster Cotter Pin 5/32" x 1-1/2"

975LMC

LiftMaster Laser Parking Assist ** To extent of inventory

  • Works with Chamberlain (LiftMaster) Garage Door Openers
  • Easily connects with two wires to the photocell terminals of the opener
  • The Laser light turns on as you drive into the garage
  • Simply Adjust the light to a specific spot on the dash
Installation ManualManuel d'Installation
83A11-2

LiftMaster Lithium Grease 0.5 oz Tube

  • Same tube of grease as in the 41C4220A kit
  • USE PART NUMBER: GREASE same grease larger tube less expensive
  • Same as K083A0011-1 83A11-2 83A14 83A4 83A8 083A0011-1 083A0011-2 83A11
883LM

LiftMaster Door Control Bell Button for Sec+ 2.0 (Use 883LMW)

  • Controls garage door operation and opener lights
  • Easy and fast programming
  • Compatible with Security+ 2.0 and MyQ remotes and accessories
Installation ManualManuel d'Installation
02-403P

Push Button Control Station 3-Button Surface Mount NEMA 4/12 O/C/S Green Black Red

  • Open/Close/Stop allows complete control of the door.
  • Compatible with all commercial door operators.
  • NEMA 4 4X 12 13
  • Outdoor surface mount station with polycarbonate enclosure part # XALD03H7
Sell sheet
882LMW

LiftMaster Multi-Function Control Panel Wi-Fi

  • Push button for garage door operation
  • Program remote controls Wi-Fi Garage Door Openers and MyQ® enabled accessories directly from the control panel
  • Light run-time is 4 1/2 minutes with adjustable light timer option
  • Lock feature designed to prevent operation of the door from portable remote controls
  • Compatible only with LiftMaster® Security+2.0™ and Wi-Fi garage door openers
  • Equivalent to Chamberlain's 41A7185
    • .......more details
Programming instructionsInstructions de programmation
BEARING005

Manaras Flange Bearing ID 5/8"

  • Flange bearing for 5/8" shaft
.225-258-R

Cut-to-Length Torsion Spring .225 x 2-5/8" Right Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.225-258-L

Cut-to-Length Torsion Spring .225 x 2-5/8" Left Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.295-2-R

Cut-to-Length Torsion Spring .295 x 2" Right Hand Wound Blue

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.234-2-R

Cut-to-Length Torsion Spring .234 x 2" Right Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
PD86CNP12QPMU

Carlo Gavazzi Photoelectric Switch Retro Reflective 12-24V AC/DC

  • Reflector (ER4) not included
Installation Manual
.273-134-L

Cut-to-Length Torsion Spring .273 x 1-3/4" Left Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.250-134-L

Cut-to-Length Torsion Spring .250 x 1-3/4" Left Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.225-134-R

Cut-to-Length Torsion Spring .225 x 1-3/4" Right Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
MOUNTSHAFT018

Manaras Limit Shaft Kit Opera

Drawing
86LMC

LiftMaster Antenna Extension Kit

  • For use with 312HMC 412HMC 422LMC and 423LMC
  • Kit contains 15ft of cable
GK-BX

Genie Dual Frequency Wireless Keypad 37224R

  • Temporary PIN codes to allow for one time special access needs
  • Able to operate up to three Genie Intellicode garage door openers
  • Auto-seek dual frequency technology automatically transmits in both 315 and 390 MHz
  • Compatible with Intellicode 1 and Code Dodger series
Programming Instructions
G3T-BX

Genie 3-btn Dual Frequency Transmitter 37218R

  • This transmitter replaces all Intellicode and Overhead Door Code Dodger transmitters made after 1997.
  • For Intellicode operators pre-1997 use GITR3 for best results
  • Operates with 315 & 390 MHz Intellicode 2 technology
  • Able to control up to 3 garage doors
  • Visor clip and battery CR2032 included
  • Replaces: GIT GIC90 GMIC90 G2T OCDT ACSCTG TBSTG GIT-1 GIT-2 GIT-3 ACSCTG Type 1 ACSCTG Type 2 ACSCTG Type 3 TBSTG GIC90-1 GMIC90-3 GIC90-2 GMIC-3BL GIC90-3 OCDT-1 OCDT-2 OCDT-3 G2T-1 G2T-2 G2T-3 GICTD-1 GICT390-1 GIFT390-1 GIT390-4
    • .......more details
Programming InstructionsInstructions de programmation
.283-258-L

Cut-to-Length Torsion Spring .283 x 2-5/8" Left Hand Wound White

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED