Devanco Canada - Get The Right Garage Door Opener‎ and Parts

CP-IDLER-ASSY-MR

Lynx Front Idler Assembly Chain TC3

SRB-2

Standard Riser Bracket for 6" Above Dock or Less 2"

Standard 2" Riser Bracket for 6" Above Dock Door or Less
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

TB-20

Molded Rubber Bumper Black 3 1/2" L x 6" W 3 1/2" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Molded Truck Bumper molded in one piece and will not warp rust rot or harden.
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
3 1/2" L x 6" W 3 1/2" Projection

LVB636-11

Laminated Bumper Black 6" Projection Vertical Installation 36" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

R2

Erone Radium 2-Channel Key Chain Transmitter 433MHz

Designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system (KeeLoq® Hopping code).
The code sent by the transmitter changes at each activation avoiding any scanning and copying risk.
A special algorithm allows to keep synchronized transmitter and receiver.
Range up to 250 m (820 ft)
Ergonomic rugged & durable
Battery: Two 3V lithium battery (CR2016)

.......more details

Wireless System Chart

MX-00016

Micanan TEFC Motor Upgrade Modification

TEFC motor upgrade for 1-phase belt drive operators

BINS-BLACK

Utility Bin Heavy-Duty Stackable Black ** NLA

Usable in virtually every environment both indoor and outdoor and they are made from Polypropylene which will not fade in the sun
Outside dimensions: 16.75" L x 10.75" W x 6.55" H
Inside dimensions: 12.15" L x 8.375" W x 6.5" H
Sold per bin

BOARD060R

Manaras Replacement Circuit Board (No Monitoring)

Control board for BOARD065

8365W-267

LiftMaster Premium Series 1/2 HP AC Chain Drive Wi-Fi

P3 Motors from LiftMaster are reliable durable and powerful – designed specifically for your needs.
Security+ 2.0 – with every click a new code is sent to the garage door opener so that the door opens only for you.
PosiLock locks down your garage door by electronically monitoring against a forced opening.
Alert-2-Close warning system provides audible and visual warnings when the garage door is about to close when using MyQ Technology.
The Protector System has safety sensors that project a light beam across the garage door opening automatically reversing the door if anything interrupts the beam.
Built in Wi-Fi for the easiest way to connect the garage.

.......more details

Installation manual Product guide Guide du produit Receiver Logic Board Conversion List

TRACK-GUARD-72

Track Guard 72" Tall Safety Yellow With Base Sold as a Pair

Provides impact protection to vertical track
45° angle flange adds strength protects from side impact.
7-gauge steel construction powder coated safety yellow for high visibility.
1/4” foot plate drilled with slotted holes for three 1/2” anchors.
Wall flange drilled with slotted holes for four 3/8” anchors
Includes: 60-5094 (right) and 60-5095 (left) sides

.......more details

72"Track Guard Shop Drawing - Left 72"Track Guard Shop Drawing - Right

4007-7FT

Aluminum Retainer only for Light Brush 90 degree

For angle application
For use with Light Brush or Vinyl Insert.

OGH-6533-CONT

Manaras 3/4 HP 600V 3Ph Gear Head Operator Contactor Model

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

MX-00033

Micanan Trolley Arm Assembly

Kit includes: MM-00031 wall L-bracket (1) MM-00032 trolley arm 105 degrees (1) MM-00033 trolley extension arm (1) MM-00034 trolley arm sliding bracket (1) MO-00004 trolley arm compression spring (1) and MR-00009 red rope c/w handle and warning label (2)

MK00542

Micanan Emerson Motor Capacitor 1/2HP 110V 324-389uf with Resistor *** No Longer Available

For 1/2 Hp 110V operators

AQ201-NB

Linear GTO Narrow Band Receiver w/Antenna and 10ft Cable

Works with all GTO DC gate operators and narrow band transmitters (gray style).
The AQ201-NB comes standard with all DC slide gate operators.
Measures: 2"H x 2-3/8"W x 15/16"D

41A5658-1

LiftMaster Dual Gear & Sprocket Assembly

This complete kit is compatible with 3/4HP LiftMaster® Models 8587/8587W; and various dual AC chain drive garage door openers.
Kit includes: helical gear and top hat assembly worm gear wear bushings grease and hardware needed to replace the chain drive gears.

TL-5000

Trailer Lock Lever 32-1/4" long Stainless Steel

Provides leverage to easily open shipping container doors
18-8 Stainless steel construction
Polyurethane coated handle
5.5 lbs.
32-1/4" long
Fits most modern container door handles

.......more details

LIMIT-KIT-BCSI

Limit Shaft Kit for BCSI Gate Operator ** Price by Quote Only

PMT20RI

Carlo Gavazzi Receiver Unit Only

PMT20RI has universal voltage input of 10-240 VDC and 24-240 VAC
Normally open and normally closed output (no timer).
Adjustable sensitivity
The housing dimensions are: 25x65x81 mm
IP67.

Installation Manual

PRO-H-7511E-RH

Micanan 3/4HP 115V 1P Hoist Operator NM ECB No Eyes Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Solenoid brake OPTIONAL
Non-monitored board NO photoeyes

Installation manual Specification sheet

41C5141-1

LiftMaster Square Rail Trolley Kit Chain Drive

Same as: 062313 41C5141 41C5141-1
Compatible with all Chamberlain and Craftsman square rail chain drive models

K32-10540

LiftMaster Gear Reducer 20:1 SL595

Same as 32-10540 32-55011 32-5501-1 G3255011

7812

Whiting Bottom Seal Truss Door White 90" Long

Fits Fed-Ex truck doors

MCJH-12-115-ECB

Lynx MCJH Heavy-Duty Jackshaft 1/2 HP 115V with ECB UL325 ** Replaced by CDJH

New LX100 circuit board.
Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
4L V-belt primary reduction #41 drive chain and sprockets.
Adjustable friction clutch magnetic solenoid brake.
Fully driven adjustable limit switches.
Heavy duty 3 button wall station (Open Close Stop).

.......more details

M-18

Molded Rubber Bumper Black 18" L x 10" W 4" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
4-1/2" depth
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles. and will not warp rust rot or harden.

.......more details

CHS401-114

Chain Hoist Shaft Mount 1-1/4" Shaft 4:1 JR Torque Force (126685)

Shaft Mounted Junior Hoist
4:1 Reduced Drive
Sprocket: 41B36. Bore size: 1-1/4" diameter
Cross Reference: OMI 4020
Requires minimum 3/8" center line offset.
Set includes: 26' of hand chain 22" of #41 roller chain Chain keeper (2) shaft collars 1/4" square key and a wall stabilizer bracket.

.......more details

Sell sheet

CP-MO-12R-115/1

Lynx Electric Motor Emerson 1/2 hp 120V Instant Reverse 6 Wire *** NLA

Replaces the 4 wire AO Smith electric motor

WB-300

Skylink Multi-Function Wall Console ***For Old EQ Models

For use with the Skylink garage door openers.
Oversized Push Button for activating the garage door opener.
Activate opener light on/off and the light will remain on until the button is pressed again.
Feature with Lock function to ignore all radio signals for added security.
Illuminated LED indication.
Easy to Install.

.......more details

T-832-H

FL-Heddolf 2-btn Transmitter 311 MHz (T-832-S) ***Discontinued

Open/Close remote for 2 doors
Battery 12V included
Compatible with Keystone T-832-H and old Allstar T-832
8 dip switch
Same as P220-2K

Programming instructions

ALUM-508

Aluminum 24" x 100' Spool Sandalwood / Sable # 508

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 508
Reverse side is #431 Bright White

Colour chart

RBH101L5-LH

LiftMaster 1 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation manual Manuel d'installation Sell sheet

MJ5011U

LiftMaster Medium-Duty Jackshaft Op 1/2HP 115V

The MJ door operator is designed for use on vertical lift sectional doors or small rolling doors and grilles.
Maximum recommended duty cycle: 12 cycles per hour
Floor level disconnect
Adjustable friction clutch
Heavy-duty solenoid actuated brake
Easily field converted for right or left mounting

.......more details

Installation manual Sell sheet

LM21XPBBVB

LiftMaster Extended Performance Fire Door Release Device with Battery Backup and Voice Board ** No Longer Available

UL864 Revision 9 compliant
Programmable DIP switch delay setting - either 10 20 30 or 60 seconds delay of door release to permit passage clearance
Inputs for normally open 2- or 4-wire detectors and 4-wire normally closed detectors
Trouble and alarm relays for communication with the fire alarm control panel if required
Audible trouble sounder to indicate when the release device is not operational
On board diagnostic LEDs for easy troubleshooting

.......more details

Installation manual

MOUNTSHAFT016

Manaras Clutch & Hoist Shaft Kit for Opera-SH

Input / clutch shaft kit for Manaras Opera-SH

K72-18615

LiftMaster Drive Shaft Kit

Kit includes: Disconnect Bushing Drive Shaft Pillow Block Bearing Sprocket Disconnect Spring Chain Disconnect Key E-Ring.
Works with SL595 SL590.

20113R

Genie Limit Switch Screw Drive

For use on Genie screw-drive openers.
Compatible with ALL Genie Screw and Trac Drive garage door openers with standard rail assemblies
Replaces either the UP or the DOWN limit switch
Replaces Genie Genius Trac Drive limit switch models 19795S and 22785R
Not compatible with excelerator models

226-9312

Lithium AA 1.5V Battery

Used in IG2 photo eyes

PC50CNT20KIT

Carlo Gavazzi Transmitter and Receiver Thru Beam Kit 20m Range (PC50CNT20R and PC50CNT20RP)

Kit includes PC50CNT20R (emitter) and PC50CNT20RP (reciever)
Operates on 12-240 VDC and 24-240 VAC supply voltage.
The PC50CNT20R has a 3 amp relay output
Adjustable sensitivity modulated infrared light make and break (light/dark) switching function LED indications for output ON signal stability and supply ON
Same as Albany 4904R0007 / PC50CNT20RP8M1370

41A3504-1

LiftMaster Antenna Kit with Adapter

Designed to work with the 433MHz receiver logic boards
Kit contains: Antenna Coaxial cable adapter and antenna bracket

BOLT027

Manaras Hex Bolt 3/8-16 x 1-1/2"

Used on old MJH

CSL24UL

LiftMaster New 24VDC Commercial High Traffic DC Slide Gate Operator

Battery Backup: 208 cycles or up to 24 days of standby power when the power is down
Security+2.0®: Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used
MyQ®: Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app
Soft start / stop extends operator and hardware life in high-cycle and heavy-gate applications
Wireless dual-gate communication eliminates expensive conduit costs and unsightly driveway scars
Keyed manual disconnect when unlocked allows gate to be operated manually.

.......more details

Installation manual Manuel d'installation Sell sheet

27-24301

Truck Door Single Torsion Spring Assembly 89.5/48 for Todco Roll-Up Doors

Single counterbalanced spring design available in 36" 48" and 60" spring lengths.
Shaft Length: 89.50" Spring Length: 48" Wire Size: .243
Right hand wound
Quick and easy counterbalance spring adjustment with easy calibration to door size and weight for effortless operation.
Springs treated with rust preventative
Heavy .243 dia. spring wire

.......more details

HBS2U

Stainless Steel Bottom Fixture 1-5/8"-2" Door 2-3" Track Single End Stile Sold per Pair *Includes (1) Right and (1) Left Bracket (2) U-Brackets (2) Clevis Pins (2) Cotter Pins*

Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
Laser Cut for a Clean Finish
For 1-5/8"-2" Doors
Fits 2" or 3" Track
Single End Stile
Pins and Cotters

.......more details

CS303-C-1

EMX Car Sense Vehicle Detector Control Unit *** Replaced by LRS-C1

The CarSense™ 303 features advanced 3-axis magnetoresistive sensing technology.
The sensor measures Earth’s magnetic field and responds to disturbances caused by ferrous objects.
The CS303 combines this exciting new technology with a fieldproven hardware platform to produce a high-sensitivity compact and cost-effective solution for reliable vehicle detection.
Three sensing elements provide magnetic field measurement in the X Y and Z axes improving detection sensitivity.

41DJ001A-390

LiftMaster Receiver Logic Board with Plate 390MHz *** No Longer Available

DC2000SL

LiftMaster Power Backup *** Discontinued

Keeps traffic moving during a power outage
Opens the gate when power goes out to allow vehicles to enter or exit
When power is restored the gate will return to normal operation
Compatible with operators: SL3000UL

9150000621

1/8" Sleeve ONLY 100/pkg

Sleeves only 100 per pack

D525-54-HL

Cable Drum High Lift 54" D525-54HL Torque Force Pair

Maximum hi-lift: 54"
Capacity: 500 lbs per drum
Max. cable size: 3/16"
Cable length: Floor to shaft center 66" minus amount of Hi-Lift
Cross reference: DNS 54 OMI 54HL M134-1375

3BXT

Control Station Exterior Surface Mount O/C/S N4 Non-Metallic

Double pole contacts
H=5-3/4" W=2-3/4" D=2-1/2"
UL Listed CSA Approved

29-ABC-15

LiftMaster Fuse 15A

For VSL595 gate operator

029-98090

T-Style UDI Replacement Door White Stainless Steel Pkg 029-98090

For openings within 98" w x 90" h
Hardware attached balancer assembly not included
Manufactured to exact size

HDC-411-LH-CONT

Lynx Ind. Jackshaft with Hoist 3/4Hp 115V Contactor Left Hand

1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
Solid state circuit board Lynx-6000. Built in 1.5 second delay.
5L V-belt primary reduction #50 drive chain and sprockets.
Adjustable friction clutch magnetic solenoid brake.
Precision pillow block bearings on output shaft.
Fully driven adjustable limit switches.

.......more details

Sell Sheet

LA400DC-S

LiftMaster Residential 24VDC Linear Actuator Secondary Arm Only New Model

Secondary Arm Only for LA400
All new arms are backwards compatible with the previous model but the LiftMaster branding is different

Installation Manual Manuel d'Installation Sell Sheet

MK00642

Micanan Smart 10.0 Full Feature Circuit Board with Contactor Interface Monitored 575V

For all HP - 575V all voltages 1.5 2 3 & 5HP

Instructions Manual

RS10311

Roller 3" Steel 11" stem 10 ball

Steel Roller Wheel diameter: 3"

DR2

Linear 2-Channel Delta3 Receiver 310 MHz *** NLA

Activates two devices
Wire lead antenna
12 and 24 Volt models
Two-channel wireless radio control designed for use with automatic garage/gate operators and access control systems.
The receiver can be activated by any of the Delta-3 format transmitters
Mounting bracket supplied

.......more details

Installation Manual

Z9998

Hand Chain 26' for Torque Force Chain Hoists SAE 1008 Zinc Plated

Works with all Torque Force Chain Hoists

2KW

Rolling Steel 2" Curved Continuous Windlock

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

PROBE-50

EMX CARSENSE-101 Direct Burial Probe with 50' Lead Wire

Wand only
Requires CS101 (Carsense-101)

41C5141-2

LiftMaster Trolley Assembly Belt Drive

For retail model
For belt drive

9150000627

1/8" Stops ONLY 100/pkg

Stops only 100 per pack

OGH-6114-ECB

Manaras 1 HP 120V 1Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

OGH-6112-ECB

Manaras 1/2 HP 120V 1Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

PPK3M

LiftMaster Passport MAX 3-Button Keychain Remote

Provides total control with one remote for gated communities and commercial properties.
Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufactured since January 1995
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)

Programming Instructions Instructions de programmation Sell Sheet

9150000629

3/16" Stops ONLY 100/pkg

Stops only 100 per pack

773

Fasteners Lag Screw Hex Washer High Profile 5/16" x 2-1/2" 1000/Box *** Temp. NLA

7/16" Head
Hex washer high profile head

MV-00297

Micanan Commercial Wireless Keyless Entry 372 MHz

Will work on Micanan commercial operators that have an on-board receiver
If there is no receiver then MK-00648 is required
Same as MV-00086

Programming instructions Instructions de programmation

766

Fasteners Flat Head Carriage Bolt 1/4-20 x 2-1/2" 1000/Box

Full length thread
Max torque = 6

AELD

LiftMaster Elite Plug-In Loop Detector

For use with Omni Control board available on the Chamberlain commercial line.

Installation Manual

K72-14130-1

LiftMaster Limit Shaft Kit H J and HJ Logic 3 Logic 4 and Logic 5 commercial operators

For models H J and HJ Logic 3 Logic 4 and Logic 5 commercial operators
Kit includes: Limit shaft Limit nuts Limit bearings Limit sprocket Interrupter cup Shim washers Compression ring Roll pin and E-rings.

DT-312

Linear 1-btn Delta3 Transmitter 312 MHz *No Longer Available*

Activates one Delta-3 receiver
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery
Codes: 256 (set by dip switches)
RF frequency: 312 MHz

.......more details

Programming Instructions

71B240G

LiftMaster Brake Kit 230/240V with Solenoid Field Install SL585 and SL595

Instruction Manual

348.000

Whiting Tongue & Groove Bottom Panel Assembly with #77 Lock Made to Order. **Quote Only

15-1/2" x 96" standard size panel.
Extra wide panels will carry an additional charge
Primer only

49563

Stanley Chain Drive Traveler Assembly

Compatible with all Stanley chain drive units from 1982-present
Not compatible with C-Channel models
Assembly includes Traveler 49564 and slider 24851

36163R

Genie Dual Frequency Intellicode Receiver 315 MHz & 390 MHz

For Genie Intellicode Rolling Code remotes Or Overhead Door Code Dodger remotes using the 315 or 390MHz frequency.
24-Volt 3-Wire Connection For Garage Door Opener And Gate Openers.
Accepts Up To 8 Genie Intellicode Or Overhead Door Code Dodger remotes on 315 or 390MHz Frequency. Note: Will not work with the older code switch type of remotes.

69625

Marantec Programming Connector

Programming connector for use with M3 remotes and Wireless Keyless Entry. Also used with M13 Wireless Keyless Entry

WG-305

Devanco White Lithium Grease

Provides long lasting lubrication and protection against rust and corrosion
Ideal for metal to metal applications
Sprays on thick providing a long-lasting protective coating that won't run off

Material Safety Data Sheet Fiche Signalétique

Q024

LiftMaster Limit Switch Assembly for SL3000 (K75-50097) *** To Extent of Inventory

Same as part number K75-50097

AW-12A

Miller Edge Air Wave Switch in NEMA 4 Enclosure

Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion
Sensitivity: 2mm to 500mm
Ambient temperature range: -49F to 180F

.......more details

Instructions Manual Sell Sheet

50-107-30

Take-Up Reel 3-Wire Metal 30ft Extended

3- wire 18-gauge
Also called Reel Cord

MS00003

Micanan Carriage for PRO-APT / T

For model PRO-APT / T

EXTANT

LiftMaster Coax Antenna Connection Kit JF

For use on Medium-Duty commercial operators only

Installation manual Manuel d'installation

SEL2641R433-I

Erone 2-Relay Stand Alone Receiver 433MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (24VA)
Self-learning memorization
Standard pulse output relay
Power requirements: 12/24Vac/dc
Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)

.......more details

Instruction Manual Sell Sheet Brochure Wireless System Chart

GM3T-BX

Genie Universal Master 3-Button Remote - 37344R

Three Button Master™ Visor Remote
This 3 button remote can be used with 3 Intellicode openers
Replaces all Intellicode Series I And Series ll remotes
Replaces 9 switch and 12 switch 390MHz Genie remotes
Works with all Genie model Gated Community Receivers
This remote will not work with 315MHz Canada 12 switches openers

.......more details

Programming Instructions Instructions de programmation

3-42-2A

Bottom Bracket with Removable Roller Carrier Commercial 3" 1-Hole BB-6 Pair *** To extent of inventory

Sold as a pair (1-left and 1-right)
11-guage
Dimensions: 4-1/2" W x 11" H x 1-3/8" D

50-101-2

Exterior 3-Wire Air Switch SPDT with Plastic Housing Mosley

Nema 4
3-wire air switch; 1-NO and 1-NC contact
Mosley
NO contact on Yellow and Green

02-407

LiftMaster Key Switch Assembly On/Off Nema 4/12

Two-position keyswitch. Key removable in either position.
Surface Mount
May be used on all operators
Die-cast metal enclosure non-tamperproof

CPS-N4

LiftMaster Nema 4 Commercial Protector System Photo-Eyes with Interface box

Commercial Through Beam Photo Eyes includes:
50-15514 I/R Emmitter
50-15515 I/R Detector
77-16011 Hardware Kit N4-CPS
001C4629 CPI Housing Assembly
Receiving Eye - A: 50-50997 Sending Eye - A: 50-50998

.......more details

Installation Manual Manuel d'installation

G3T-BX

Genie 3-btn Dual Frequency Transmitter 37218R

This transmitter replaces all Intellicode and Overhead Door Code Dodger transmitters made after 1997.
For Intellicode operators pre-1997 use GITR3 for best results
Operates with 315 & 390 MHz Intellicode 2 technology
Able to control up to 3 garage doors
Visor clip and battery CR2032 included
Replaces: GIT GIC90 GMIC90 G2T OCDT ACSCTG TBSTG GIT-1 GIT-2 GIT-3 ACSCTG Type 1 ACSCTG Type 2 ACSCTG Type 3 TBSTG GIC90-1 GMIC90-3 GIC90-2 GMIC-3BL GIC90-3 OCDT-1 OCDT-2 OCDT-3 G2T-1 G2T-2 G2T-3 GICTD-1 GICT390-1 GIFT390-1 GIT390-4

.......more details

Programming Instructions Instructions de programmation

CPS-UN4

LiftMaster Commercial Protector System Thru-Beam Eyes NEMA4

Waterproof photoeyes.
for direct connect to operators with Logic boards. L3 L4 L5
Receiving Eye - A: 50-50997 Sending Eye - A: 50-50998
These eyes will also work on the Micanan UL325 monitored operators

Installation Manual Manuel d'Installation Sell Sheet

41A5021-1ATS

LiftMaster Circuit Board Assembly (41A5021-1HATS)

Board: Security+ 390 MHz
Assembly includes: circuit board and end panel
Also includes: 1 Multi-Function wall ctrl panel - 2 wire
For: ATS211 & ATS211R
For newer model ATS use replacement board 41A5021-9G-315
Same as 041A5021-1HATS

.......more details

AW-14

Miller Edge Air Wave Switch in ABS Box

Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Molded enclosure
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion
Sensitivity: 2mm to 500mm

.......more details

Instructions Manual Sell Sheet

374LMC*

LiftMaster 4-btn Sec+ Transmitter 315 MHz - DISC

Compatible with wireless keypad model number 377LMC
Compatible with Liftmaster garage door opener model numbers 3595 3585 3575 3500 3280 3265 3220 3255 3245 3110 1356 1355 1346 1345 ATS2113X ATS2113X-CX HCT501130 LGO50113O LGO50113L LGO50113R LGO50113XR
This transmitter is replaced by 894LT

41AC075-2S

LiftMaster Circuit Board Assembly for Single and Double Capacitor Models 315Mhz

Assembly includes: End panel Logic board and Light socket
For chain drive units with two lights ie..3575 3585 3595 PD752D and PD758D

41A4885-5

LiftMaster MVIS Pulley/ Worm Gear Assembly

Gear and sprocket assembly for belt drive units after 2002.
Assembly includes: Spring washer thrust washer retaining ring bearing plate two roll pins drive gear and worm gear helical gear with retainer and grease.